Building truck door hinges from scratch - 1951 Chevy Rat Truck Build
Вставка
- Опубліковано 14 жов 2024
- I finally get hold of doors that will fit my Chevy. They came from a burnt wreck, are in bad shape and have many missing parts, but in this video I build door hinges from scratch and make the doors work again!
#custombuilt #ratrodbuild #doorhinges
Buy cool T shirts here:
www.redbubble....
www.redbubble....
www.redbubble....
DON'T CLICK HERE!
bit.ly/3I7egBs
Please consider subscribing to the channel. Thank you!
Thank you sir for sharing this trick. Amazing workmanship.
1500-2000 degrees f. to make that type of glass slump that way.
Wow, that is HOT!!😅
For us young fellas, this is what magic is. step by step, o'l school. Thank you.
Doug, what you say is why I do videos. Thanks for that!
Nice watching someone in the same hemisphere 🤙
Lekker Lekker from down under
Goeie werk oom
Dankie Nols! Groete daai kant
You could use that door hinge to mount a mirror to
Some dudes just have brains... that will make the door hinge way less conspicuous! Clever plan!
@@ratrodsafrica Thats going to be a cool ride when it's done ... build on
Mr. Wizard strikes again. Your work is off the charts. A+++
Thanks brother, appreciate!
Attaching bolts by braille is always fun
Ha,ha that's a good way to put it!
I love rock and roll.
With those custom hinges. You just fixed a eternal hinge problem on Chevy from the 50s. Even if you find some originals rebuild or after market made in China the never, ever, ever fit perfect you would need wedges or something to make them work properly. Thanks for sharing!!
Well, I didn't even know that! Mine ain't going anywhere 😅
Div!! Your toolbag or "pocket" must be heavy from holding all your tricks and tips. Learning alot from you Boet!!
Makes me happy of I can teach you a few tricks!
CLUTCH HEAD BOLT / SCREW
Having the Doors come from a Fire 🔥...means it is a True HOT🔥ROD!!😉
Yeah man!!!😂
If it's square it's a Robertson and that means the door comes from Canada. However I remember from mine also Canadian that there were some that had two flats and rounds on the ends, it was 60 years ago. Cheers old man, remember to turn on the gas, I know it's cheaper without the gas, but it doesn't work, lol.
Rock Crusher, you know stuff that I don't means you must be older than me!😅
The coolest and strongest higes in the world!!
😆 🤪Thanks boet!
Great job on the doors & hinges I like the look!
Awesome as always awesome morning brother
The screws on the inside of the door panels are called Clutch Head Style screws. They are used for attaching the sending unit on the gas tank on older Chevys as well as the headlight buckets, and on your truck, the glass channel mechanism. I'm sure they are used elsewhere also. I believe they had a certain amount of torque associated with tightening them. There is a special tool called a clutch head driver to remove those strange screws. Your Rat Rod Truck build is coming out great! I really liked the way made your own hinges... Great idea and a great job!! Really enjoying your videos!!! Keep them coming and Happy Father's Day!
Thanks, now I know. But still think they are crappy fasteners 😅 Thanks for all the nice comments!
@@ratrodsafrica Agreed, they are lousy fasteners. It makes you wonder if the Auto Manufacturers purposely try to drive us crazy with this stuff!
@@19dd57chv the guy who designed those things definitely had such thoughts!😅
Those square screw heads look to be Robertson #1, #2,#3 ,and #4 . They are super common in Canada and in USA they are commonly called DeckScrews
They are not square heads. We commonly use them too. Its an odd shape and I have since learn it is known as a "clutch head".
Nice Diffy! Gott, the rain was woes! It woke me up a few times. My bones are close to the surface and this cold gets me quickly.
Fokkit, that protruding hinge is the perfect spot to hang a steel spider or skeleton hand! Symmetry, like paint, should be insisted on only where it is required. A 3 hour cut/grind/reweld to me means it can fly frightfully fast into far fir forrest... 🤘... where it can spend eternity with the clear coat polisher and wax.
😂😂 lekka comments Sean. And you taught me a great new expression. My bones are also close to the surface!
You are great to watch true craftsman layback from florida
Thank you brother! Greetings to Florida
I started watching(and enjoying)recently and have been binge watching this build. Nice job! I used to have a 57’ Chevy PU when I was in High school. Back in the seventies and early eighties it was still cheaper to fix up something like that than to buy new and used vehicles. My Dad called those Screws Butterfly Head or Hourglass I believe. But according to the popular answer in your comments I guess they’re Clutch Heads. Whatever you call them they were and still are a pain in the ‘Ol Tush, for people doing what you’re doing. Keep up the good work over there in Africa. Side note:
I could still get Screwdrivers or a set of Driver Bits for those as late as the 90s, but I don’t know anymore.
Thanks Michael! Well, I don't like those stupid fasteners, have taken out the lot and will use something better where required😅
I love your hands on approach
Thanks, it's the only way I know😅
“Getting too old for this shit “ said the myself this morning , lekka work Div
Means we just gotta go slower...😅
In Canada we call that screw a clutch head only found on GM cars
Those were bowtie screws chevy used to use.
There are screw drivers available for them.
Very cool. Thanks for taking the time to share your skill and artistry.
Glad you enjoyed it! Hoping you can take something away from my efforts Victor.
Turned out awesome
Thank you Stanley!
Perfect div looks good
Lekka! you're cold and we just started getting hot! 97F or so here!>.. (36C) crazy seeing you in a coat!
Jip, in Africa everything is backwards! 😂
coming along nicely, lekka man !
One step at a time!😅 Thanks
I like your hinge design 👌
Nice job Div, loving your work.
very nice solution for hinges ...
Thank you! Cheers!
Well as they say..you can only see one side at a time!
Exactly!😅
Enjoyed the video!! I wont 🤐 tell anyone about the other hinge 😂 they worked great 👌
Great, thanks 😅
The 52 panel I'm still working on has the same silly screws/bolts...And yes they are clutch head, I have a set of screw drivers for them. Got them from a friend's father that used to work for GM putting them in there. Pain in the but.....Nice job on the hinges.
I got rid of the whole lot!😄
Fun !
I watching you video for the fourth time, it still a good ad first time, thank you my brother. Nice
Thanks!
Doors are always so much fun by yourself 😉
😆 Yes. And a few other things
Dif,
Before you showed off the set screws. I was going to suggest that you weld nuts to the top of your pins. But your idea I like better. Keep up the great work.
Bart
Thanks Bart. Did toy with the nut idea, then decided the set screws will look better.
The bolts at about 23 min are called clutch heads here in Canada,,, my dad had the drivers in his tool box he was a mechanic in the40s…go to admit there better then a slot head if you have the drivers lol..great UA-cam channel
Thank you! Yes, with the right driver probably better than a slot, but otherwise a pain...😅
Yeah, I ground down mine from a allen wrench. There is two sizes case you didn't know. Yeah, that was the reason to make the video. Ronnie.
Yes, like it , I think that the way I will do it too
Good job there 😊
Thank you! Cheers!
Still door gaps are smaller than teslas 😆 keep it good work! 😉
🤣
nice hinges
Thank you!
They are called clutch head fasteners. very common on 40's 50's and early 60's GM vehicles
Thanks. Now wondering why clutch head? Still think it is a crappy idea😅
Awesome ,, having doors that work well is a great deal , i worked on one of mine all day and still not happy with it ,, lol , Happy Monday my friend
Yes, I'm happy that they swing!😅 Doors can mess you around big time
Those evil little bastard bolts are called Torq bit (At least here in the US) or safety torq if they have a tiny nipple in the center. They became popular in the 80’s and are used when the car companies really don’t want us shade tree mechanics working on a particular part. If you have a normal set of Star bits, you can use a small punch and knock the nipple out making them regular star bits. At least that’s what/how I was taught to do them in automotive school.
What were the chances of finding 2 doors for a 51 Chevy 3100 in South Africa ! And free ones at that ! Good job on the hinges ! (Don't change the sides to match. (rat rod character) I remember those strange headed fasteners from my 49 Chevy
pickup I had as a teenager. Don't know what they are called , but I had the same opinion of them. Working by yourself can be a great challenge . More time can be spent in figuring out "how" to do it alone than actually doing it.
Heat index was 103 deg. F in central U.S. last week ! that's hot ! but I'm still not welding in flip -flops !
Love you work man
I appreciate that! Thanks
I like the way it looks. They seem to work nicely. If you're happy then it's good.👍. Thanks for the video
Pleasure and thank you Tim
in USA we call them clutch head on the back of a holley carb inside the rear bowl there are some small ones
I've seen them on the Holleys, still think its a crappy fastener! At least now I know what they are called. Thanks.
We do it nice cause we do it twice (Fab Rats saying). Need to call this build The Exposed Hinge.
There must have been some heat in that fire.
Cool saying! 😂
👍👌👏 2) Hope you will be able to have functioning door windows.
Best regards luck and health.
No side windows for now...
Dear @@ratrodsafrica
Thanks for replying and especially for another heart. I always appreciate both very much.
2) Okay. So I simply have to guess: No winter, no thieves and no vandalism where you live!? 😁 ;-)
Sincerely yours.
This came into my recommended....3 mins in, subscribed 💯
Thanks man! Welcome aboard 😅
leave the hinge like it is looks good
clutch head screws
13:04 Nut Serts would have helped in mounting the hinge'
23:19 That is a clutch head bolt /screw. There are sockets and screw drivers made for the different sizes.
What is Nut Sert? I haven't got a clue...😅
@@RichieCat4223 ah yes, what we call riv nuts over here. Great idea, need to add to my armoury!😅
Thanks for doing such a good job with the camera. I can see 👀 you put A LOT OF TIME INTO YOUR SHOTS . I didn't realize how important the line of the hinges are . Great 👍 job
Thanks so much!!
I always admire your Bush Engineering!Keep up the good good work!
Thank you buddy!
Really enjoy watching your videos.
Thanks Allan
Thanks, glad it brings a little enjoyment 😅
At first you don’t succeed try try again! 👍 looking good young man. I was hoping you put suicide doors on the ole girl but still looks good either way. Looking forward to seeing the power plant you 🫵 install…taken care and have a great week. 👍🇺🇸🙏
Briefly toyed with the idea of suicide doors, then decided against it. Stay safe Don
The truck is working out nicely . Great ideas for hindges and the bolts are called Clutch Head bolts. I have them on my 57 Chevy Panel.
Thanks 👍
top top BRASIL
Obrigado!
Just found your channel you are incredibly talented love your mind set on the subject please keep the videos coming from the states my friend God bless
Welcome to the shop Arnie! Thanks
According to the ol' inner-web those are called "clutch head" screws.
Ah, thanks Randy. Still think they are useless...
Seeing those doors being used is far better letting them rust to nothing or being crushed and melted into rebar
It looks like a Phillips head screw and they come in 3 sizes 1,2,and3 Jay hardy in canada.
Definitely not a Philips. Apparently called a clutch head screw, according to feedback from several other guys
love watching your videos mate, would love to see some old holden cars over there in Africa, if you know of any old wrecks to show us that would be a awesome vid to see, cheers from Port Lincoln south Australia
Thanks Wayne! Will keep my eyes open!
Door on, door off, door on, door off. :D
Hehe, that's how it goes with this custom one off stuff
I love the way it is coming out!
I know I'm late to the party, but I'm all the way from northern Canada and it's a long walk , But i brought words. the words are (clutch head screws) at least that's what we call them in metric Canada
That's a seriously long walk just to educate me a little! 🤣 Thanks man😁
Great job my friend!!!!! That worked out awesome. And I really like the way you put it on the outside. That adds to it in my opinion. That thinking chair is worth it’s weight in gold. Lol!
I’m enjoying every minute of this build.
Oh yeah, Happy Father’s Day!!!
Thanks Harold👍A little late maybe, but happy fathers day to you and yours too!
Great job as always. I love the exposed hinges!
Thank you Rick! Cheers!
Great job Div. I am just thinking the pivot pin "imaginary" centre line does not need to clear the curve of the door. By moving the position of this centre line closer to the cab means the hinge extension can be less. I hope that makes sense. I will try to send you a sketch of what I mean, if you wish. Having said that. You got it done in a jiffy. Sometimes I feel I am too clever for my own good. Over think things...slows the process down...Like Winston Churhill said "PERFECTION IS THE ENEMY OF PROGRESS". You inspire me to get things done, Thank you again for another great video.
I know exactly what you mean! But is done and it's just a rat rod🤣 I think if I mount some rear view mirrors on the upper hinges it will look better. Or a spider, or something🤣 I hear you about the perfection thing, been fighting that demon my whole life😅 I constantly make an effort to say it's good enough. 🤣
Lots of work but it sure is shaping up! Loving the build 👍
Thank you Stew. Guess you can say I'm addicted to creating stuff 😅
The bolt , screws are clutch head.
looks really good well thought out i think it makes the truck look better
Thank you!
Show de bola! 👏👏👏👍
Doors looking good so far , keep up the good work 👍
Thanks Chris
Beautiful work on your hinges, that's great bush repair right there 😀
Thanks! Thats me, just a bush mechanic 😅
@@ratrodsafrica I think I'm the same level being a shade tree mechanic,,lol but it's all about using what we have and making it work, I can wait to see how you finish the "bonnet" sides
👍👊
The old cabbie is coming along nicely, love the external hinges , definitely need some brass on this build , rivets ? Door handles??
Thanks man. Yes, we will see what the cosmetic trim will come down the line.
Those screws same as 42 chev truck cab can buy tips or make one from allenkey socket
👍I would have to make a tip, won't be able to buy them here
Just found you 🧐🇬🇧🥇⚡️
Welcome! Hello GB!
Thank you . Your an interesting and talented guy . 🇬🇧🥇🧐⚡️
@@RedHotChilliMe Thank you Sir!
Those screws are called clutch head screws.
Thanks, now I know!
👍🏻🍺
As a rule i usually address issues on the drivers side of my car that i'm not happy with but issues on the passenger side rarely get the attention that my passengers say it needs, apparently "i don't care, i never sit on that side" isn't the right answer.
Haha, I like your way of thinking!
I always start on the passenger side. That way I can resolve any issues before I get to drivers side. That's the side your gonna see the most. Out of sight, out of mind!
That's what I did. This is a right hand drive truck!😅
@@ratrodsafrica I was thinking same., but only postmaster driver on your right in America. I would fill totally funny I had to drive on right side. never did that !😎😎👍👍You have great YT channal we wish you the best . the hinging kick ASS BOTH WAYS. TENNESSEE HILLBILLY 👍👍👍👍👍 keep on ratting .
@@maryfinchum9741 Thank you! When I was in the US, had to drive on the "wrong " side 😅 You soon get used to it
@@ratrodsafrica Ha! I'm so deeply indoctrinated to driving on the right side of the road, I didn't even think about the truck being RH drive!
He did.
When u cut the windows on the doors u can't weld the inner steel does just welding the outer still give u the strength of the door before u cut it noob ?am sure ty am just loving your videos
No, I've never welded the inners and never any issues. I think its strong enough.
Sir, I would like to comment about your attempts at creating something new for a steering wheel. my idea is a rat rod sort of steering wheel. can you some how make a steering wheel that looks like a snake wrapped in a circle? of course I have no idea how that would be done! maybe you would?
It's possible, would require a lot of work!😅
You can only see one side at a time, so nobody will ever know the hinges are different unless you tell them 😜
Only me and you knows 😄
Those are what we call clutch head screws, and yes, I think pain in the ass was designed into them from the factory
Now I know, thanks. Why would anyone come up with something like that??😂
I need a new mig welder, what brand and model do you have?
I have a Uni-Arc 200. Very much doubt that this brand is available everywhere. Where are you?
@@ratrodsafrica l am in northern New South Wales between. Nimbin and. Byron. Bay . I have old unimig procraft 250 heap of shit,too expensive to fix. Thanks for the reply, cheers Steve
It's a shame you couldn't get the original hinges they don't stick out on the outside of the body like that like that but as you say it's so rat run what the hell Do what you have to do nice job
A real rat approach Rick, building with whatever I can find!😅
@@ratrodsafrica I completely agree I hope you didn't take it like Meant it like an insult it was kind of the opposite
Those screw heads are called clutch drive, and were supposedly used to assist in rusty areas. Evidently not too functional.
Horrible screws! 😂
Those are clutch head screws...
It’s a rat rod why you need doors. 😂😂😂
The original plan was to just weld in some pipes or something, but then the doors found me...😂