I think there are way to many variables in this tests due to slippage of position on wrench and when pressing it's created false data points the test would be far different if wrenches where in fixed position and vices didn't move around in test because that's where the parts flaied at first instead of seeing fatigued factures from stress applied vs slipping
The distance from pressing point to fixing point (torque length) needs to be fixed to ensure a fair comparison. Some tests failed to comply with this rule with minor shifts unfortunately, perhaps due to limited condition. However, this is still a valuable test and thanks for the wonderful work.
Comparing those the thickness should also be considered. Thicker - obviously stronger. Many times a thinner wrench is more useful. The Millwaukee while impressive is also bulky.
Interesting. Most of these wrenches will do the job for the average task. But what is better? A rigid wrench that breaks or a less rigid one that gives and bends a bit? Is a rigid tool more dangerous (since it breaks)?
try on a BLOATED Lithium battery! can't find any videos of anyone trying to squish a bloated li-po / li-ion batteries. only normal AA ones.. atleast press it to its original size. I'm so tempted to squish my phone's bloated battery
@@ГражданинМира-с5й старый под квадрат, это вообще стёб. Я про современные, наверняка у американца есть такой же ключ с простым зевом и таких результатов там не увидишь.
The world doesn’t have much good to say about us Americans, but we always made quality tools. We made bulletproof appliances, too, until the Asians put us out of business.
Tru although snap-on is terrible price-quality ratio. The Asians produce according to specs you give them. The shareholders value is more important than quality. lower quality appliances; happy share-holders and the board.
You are absolutely right! The pitty is that you are in the EU. And they are running things ,together with France. But there is also a good side, Poland is less occupied by the USA then Germany. At this moment I think 😀
I think there are way to many variables in this tests due to slippage of position on wrench and when pressing it's created false data points the test would be far different if wrenches where in fixed position and vices didn't move around in test because that's where the parts flaied at first instead of seeing fatigued factures from stress applied vs slipping
Würth ist nicht unsere beste deutsche Qualität. Nimm Hazet! 😎👍
The distance from pressing point to fixing point (torque length) needs to be fixed to ensure a fair comparison. Some tests failed to comply with this rule with minor shifts unfortunately, perhaps due to limited condition. However, this is still a valuable test and thanks for the wonderful work.
Всё зависит от материала из которго сделан ключ, и всё! У американца вообще рёбра, он вне конкурса
Re-upload?
What about Facom?
Comparing those the thickness should also be considered. Thicker - obviously stronger. Many times a thinner wrench is more useful. The Millwaukee while impressive is also bulky.
Crushing that hard wrench is amazing!😯🔧
MOLTO INTERESSANTE
1920 y - is milwaukee :) 17,2 mm
There is a brand called Izeltaş in Turkey. It is the most prominent brand in Turkey. Please include that brand in your tests.
这个是叫液压机吗？我看到那二维码好像是我国哪家公司的
Interesting. Most of these wrenches will do the job for the average task.
But what is better? A rigid wrench that breaks or a less rigid one that gives and bends a bit? Is a rigid tool more dangerous (since it breaks)?
One that bends slips on the bolts and one that doesn't suddenly breaks and flies on your face without giving any warning
I think the closed end test might be more dramatic?
You could test the WERA Joker ?
Bro so close to get one million sub
Какая камера используется для медленной съемки? Или просто телефон в режиме slow mo?
да профссиональная камера по любому) какой телефон так снимает)
Please press connecting road piston 🏎
Milwaukee wrench, i think of Smokey Robinson, "you really got a hold on me"😅
And Facom ?
Good
Stanley vs sata vs proto 😢 plis
Hazet 💪
Where milwaukee tools are more expensive than wurth? In Poland are cheaper. A little
BRO YOUR CAMERA IS FADED!
Should try a Snap On wrench 🔧, & see if it becomes Snap off
You could try Turkeys best brand (izeltas)
No Force Taiwan this time?
try on a BLOATED Lithium battery!
can't find any videos of anyone trying to squish a bloated li-po / li-ion batteries. only normal AA ones..
atleast press it to its original size.
I'm so tempted to squish my phone's bloated battery
Американской ключ не корректно сравнивать, у него профиль зева другой!!!
а торцевой сторой ? милуоки какне крути намного качественнее любого) но и цена серьезная на набор такой будет
@@ГражданинМира-с5й старый под квадрат, это вообще стёб. Я про современные, наверняка у американца есть такой же ключ с простым зевом и таких результатов там не увидишь.
@@ВладиславДанилов-р4ч качество метала) ключ не диформировался)))
и веса раза в три больше .
No Poland?
No Japan?
greatness of american made
If from Germany, then Wera. That is quality
Zumal Würth auch kein Hersteller ist. Da gibt's besseres aus Deutschland.
The no name its not bad just 33 cent !
👍🏻
İzeltaş dener misiniz
Made in turkey
if you are testing german tools, don't use wuerth. this is 2nd class tool. use tools from hazet or gedore
no wonder Mechanics bust knuckles, pushin wrench till it slips off the nut🤔😬
then they get even, with the Torch😁😆
Milwaukee 💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪
you should try pressing Limped Teeth, tag me! lol
I never see FACOM in your vidéo, it’s pity
The world doesn’t have much good to say about us Americans, but we always made quality tools. We made bulletproof appliances, too, until the Asians put us out of business.
💵🤦♂️
Tru although snap-on is terrible price-quality ratio. The Asians produce according to specs you give them. The shareholders value is more important than quality. lower quality appliances; happy share-holders and the board.
USA ...
what the hell is that Allan wrench made of Jesus christ
Snap-on i?
GEDORE 🤨
Hazet 😁
würth is kein hazet !!
Würth is not made in germany!
WHY THERE IS ALWAYS GERMANY NO POLAND. POLAND IS BIG TOO POLAND IS RICH TOO POLAND IS A WAY BETTER THAN gERMANY
What is your problem?
You are absolutely right! The pitty is that you are in the EU. And they are running things ,together with France. But there is also a good side, Poland is less occupied by the USA then Germany. At this moment I think 😀
1
US Steel wins, more funny that the bar that was holding wrench, breaks first! Lol
Because Force Taiwan was not there.
Chinese hydraulic press wins
Early
I think it’s pretty clear to only buy American quality… this video proves it!!!