Anyway Tom, thanks. I made this video because I installed remote start in the car and also push start but there was no way to remove the ignition to place my push start and when I found it, I made a video to help others.
We tried it out like in the video. The screw could not be loosened with pliers, we had to tap it out carefully with a hammer and chisel in a circle because it was really stuck.you cannot remove the lock without turning the ignition key Cross you cannot press the button when locked and the vehicle will not start again because the immobiliser will not open after the lock has been changed.. so i changed the lock and had to take the car to😢 Garage
Hi, quick question. Do you know where the key code might be in the car. I've checked the driver's door barrel, but it's not there. It's a Toyota Aygo, 2016, UK spec, right hand drive. I took the door barrel out, but having difficulty to pick the lock It's a TOY48 Lishi tool. Thanks in advance
Unfortunately no. You also need the chip from the car key you lost. As far as I know the only way to do it without a locksmith reprogramming a new chip is to move the original chip to the new key
@@paulinasandu3325 you can't. You have to do it prior to the change. That's why I left my comment to help others. Now you need to call a car key solution company or similar to do it for you. In London it costs £250.... I don't understand why the guy in the video don't talk about this.
@@paulinasandu3325 Also don't even try putting back the previous one. It won't work anymore. The only option is to make a key for the code that the car has which is working with your new ignition.
@@Dobee1000 It was an theft attempt, the individual left my citroen C1 with the steering locked and key cylinder damaged with something stuck inside. I will have to search for someone that can recode the new key, preferably not dealer.
For me that is a video like this the real spirit of UA-cam. Thanks a lot! Now I replace my tricky ignition cylinder in a C1 from 2008.
Biggest Thanks you Safe My life and the life of My Little C1 😊
Thank-you!! Saved me a real headache!
Thank you very much 🙏
Very clever thanks
You are a legend!
I was wondering how to remove that bottom pin in my Citroen Berlingo, and you saved me from drilling it out.
Thank you!
Very helpful video.
Thank you.
great video, VERY VERY helpful !
Thanks alot 🎉🎉🎉🎉❤❤❤❤
Thanks mate 👍 just what I needed.
Thank you for the video.. Very helpful 👍
thanks for your comments
just 10 thums up .I don't understand.Super usefull video!!
Anyway Tom, thanks. I made this video because I installed remote start in the car and also push start but there was no way to remove the ignition to place my push start and when I found it, I made a video to help others.
Olha o meu Toyota na tem corrente nas bobinas o que pode ser?
Very helpful video, Thank You!
thanks for your comments
Great video 👍🏻👍🏻👍🏻 Very helpfull
Thanks, great job.
Thanks for your message
Thanks for such a fantastic information
It's works.
Thank you! Very usefull! 👍
Thanks
Ist great!
But please tell me how to remove the key cylinder from the lock.
Thx bro
We tried it out like in the video. The screw could not be loosened with pliers, we had to tap it out carefully with a hammer and chisel in a circle because it was really stuck.you cannot remove the lock without turning the ignition key Cross you cannot press the button when locked and the vehicle will not start again because the immobiliser will not open after the lock has been changed.. so i changed the lock and had to take the car to😢 Garage
Hi, quick question. Do you know where the key code might be in the car. I've checked the driver's door barrel, but it's not there.
It's a Toyota Aygo, 2016, UK spec, right hand drive.
I took the door barrel out, but having difficulty to pick the lock
It's a TOY48 Lishi tool.
Thanks in advance
super!!!
The problem I have with my 2006 C1 is the ignition switch is very loose on the steering column, what is the likely cause for this?
I lost my car key for Citroen c1 2008 if i buy ignition cyclnder it will be work please let me know thanks
Unfortunately no. You also need the chip from the car key you lost. As far as I know the only way to do it without a locksmith reprogramming a new chip is to move the original chip to the new key
Guys don't do this without changing the code. I have just done this replacement and now I am unable to start the engine.
How do i change the code?!?! just changed my ignition switch and now the car won't start! I have the new key. How do i find the code?!?
@@paulinasandu3325 you can't. You have to do it prior to the change. That's why I left my comment to help others. Now you need to call a car key solution company or similar to do it for you. In London it costs £250.... I don't understand why the guy in the video don't talk about this.
@@paulinasandu3325 oh and don't try staring the car now because you can cause further problems potentially a complete car brake down.
@@paulinasandu3325 Also don't even try putting back the previous one. It won't work anymore. The only option is to make a key for the code that the car has which is working with your new ignition.
@@Dobee1000 It was an theft attempt, the individual left my citroen C1 with the steering locked and key cylinder damaged with something stuck inside. I will have to search for someone that can recode the new key, preferably not dealer.