DIY Headphone Stand - A Desk Setup Upgrade build with 1x2 lumber & basic tools only !
Вставка
- Опубліковано 8 чер 2024
- #diy #headphonestand #desksetup
In this video i made a Diy Headphone stand for my Desk setup, a Step by step guide of DIY a Headphone Stand, a must have & an affordable project for your Desk setup upgrade, who doesn't needs a headphone stand.!! rite..
Easy to make at home by yourself, cheap and affordable, just under $10.
its a 14 inches high, lightweight, yet very very Rigid stand, that is built by only Basic household tools, no special tools no power tools, cutter etc. besides only a simple drill machine & a Mitre box.
Tools, Materials and dimensions are shown in the video, and affiliated links are here for your ease..
Affiliate Links:
Mitre boxes options:
-CRAFTSMAN Mitre box: amzn.to/3VovQbE (Amazon)
-STANLEY Mitre Box: amzn.to/3XjF9Mn (Amazon)
-GreatNeck Mitre Box: amzn.to/3VjD8gy (Amazon)
-Stanley Saw Storage Miter Box: amzn.to/4aTpdUf (Amazon)
-STANLEY (ULTIMATE) Miter box: amzn.to/3VyiL0v (Amazon)
Wood Options:
Size (3/4" x 2" x 36")
Maple Lumber: amzn.to/3KCuUeu (Amazon)
Red Oak Lumber: amzn.to/4ehaiX2 (Amazon)
Walnut Lumber: amzn.to/45j78h3 (Amazon)
Tools and stuff:
-3-Piece 8" Wood Rasp File Set: amzn.to/3z213JQ (Amazon)
-Drywall Screws: amzn.to/3TIDLj5 (Amazon)
-Ratcheting Screwdriver: amzn.to/3U0ZqV7 (Amazon)
-Hand Saw 15-Inch: amzn.to/3vpiUcx (Amazon)
-Tape Measure: amzn.to/3xiCAPK (Amazon)
-Super Glue for Wood: amzn.to/3TI47ln (Amazon)
-Premium Wood Glue: amzn.to/4aDJMo7 (Amazon)
-Paint Scraper, 10 in 1: amzn.to/3VEzMXc (Amazon)
-Drill/Driver: amzn.to/4afxPFj (Amazon)
-Wood Grain vinyl: amzn.to/4azjMu2 (Amazon)
Video equipment:
Camera: (MOBILE)
Tripod/Monopod: amzn.to/3VFjSMv (Amazon)
Tripod Fluid Head: amzn.to/3PKWwB4 (Amazon)
Mini Camera Tripod: amzn.to/4axQZG4 (Amazon)
Camera Slider 1: amzn.to/4cGX44P (Amazon)
Camera Slider 2: amzn.to/4cGiqzA (Amazon)
Light Panel Lighting Kit: amzn.to/4ampQXa (Amazon)
- Work Gloves: amzn.to/3vFPBlS (Amazon)
-Masking Tape: amzn.to/3TYvHfr (Amazon)
THANK YOU if you purchase anything from any link :) - Навчання та стиль
Awesome utilisation of standard, common tools! 👏
Glad you liked it 😊 thank you !!!
Looking forward to all your future projects I like to see them . ^ ^
Awesome...!!! thank you! More on the way 😊
good job man.
Thanks Man !!!!
now do some shelf for the walls
I'll do it for sure!!
great job bro🙂
Thank you so much bro ✌🏼
Nice one.
I made one from a small metal sheet, but I attached that to the side of my desk, so it's not as aesthetic as this one.
One thing you could consider is round ingthe edges where the headphones are resting (over time it could cause marks on the padding).
Another way I was thinking was increasing the resting area of the headphone, like when it's on a head, a wide U shape?
Thanks man !! Yes I was thinking the same about rounding the edges.. but the look I needed was straight edge. So I left it like that. Yes it can produce marks but headphones do wear off time to time by themselves too.. any ways I'm Gona build another one in future with some different design. .. stay tuned bro. :)