iPhone 13 Teardown - Full Disassembly
Вставка
- Опубліковано 23 вер 2021
- The iPhone 13 launched today, and i fully disassemble it. Starting with the 2 pentalobe screws at the bottom, i pry up the screen, remove the battery, and teardown the entire phone to see how it's built. Hope this helps people with screen replacement and general iphone 13 repairs! .........................................................
Subscribe & check out my other tech restoration, teardown and mod videos!
Follow me on Instagram: / restoretechnique
Buy Me a Coffee 😄 : www.buymeacoffee.com/restoretech
Filmed on: Samsung S10e & S20
Music: Smile - Slynk
If the following Tools list helped you, please considering leaving a comment :)
Tools:
- Pentalobe TS1 (0.8 mm)
- Phillips Head #00 Screwdriver
- Tri-wing screwdriver Y1
- Ozito Heat Gun
- Suction cup/s
- ChemTools 99.8% Isopropyl Alcohol
- Steel spudger
- Green Nylon spudger
- ESD tweezers
- Nylon tweezers
- Various plastic spudgers/pry tools - Наука та технологія
Things to note:
- The screen only has 1 flex cable now, as the Digitzer and OLED no longer need separate ribbon cables.
- The screen no longer carries the top earpiece speaker, it's only the top microphone and proximity sensor (and light sensor?)
- The rumour of the iPhone 13 not even booting up with a replacement battery has been squashed.
- Face ID is disabled with an independent screen replacement (outside of Apple). Hopefully a screen re-programmer can solve this barrier soon.
I don't think iPhone buyer would even dare to try that
Hello again, you should probably pin this comment.
@@lowkeybear10 hey thanks, I pinned it, but it keeps becoming unpinned... does a pinned comment only last 2 days or something?
Restore Technique Probably a random bug on UA-cam's side.
Face ID works??
I like what u r doing here. Zero damage to the phone and total professionalism 👍🏻
Got some concerns about the wireless charging coil but other than that good job.
@@losien1 Thanks. Wireless charging still works 👌
It’s so he could return it and get his money back when he’s done with the video 🙄
He did “damage” the phone. He pulled and broke the rubber that’s supposed to block water from coming inside the phone.
@@Grant-du8ixtrue you should only take it off if you have a replacement ready
Using iPhone 13 to watch iPhone 13 teardown
Yeahhhhhhh me too
Me too 😂
Same
Me too 😂
Me too😂
Best teardown I have ever see, since iphone 2g I’m watching teardowns… your style is 🦾
It's cool to see the insides of these and how simple they really are, but I'm glad I don't work at a repair shop or I'd be breaking 12 a day 😂
The video quality is way better than the average of the channels of a similar age. Please keep up with your great work!
Very interesting, I'm impressed how the engineers intellectually managed to fit all components in such a limited area
Watching this on an iPhone 13😂
Wow the iPhone is beautiful from inside!
best teardown channel on YT! thank you for not abusing the gadgets.
I love the format, your skills are very impressive! You've earned my sub!
I never knew I’d find an ASMR inspired iPhone breakdown so satisfying, wow haha
Now you are hooked! 😁
2:27 yes this is where to actually start opening up the screen of the iphone 13 you can here the green tool sliding in love your videos btw good quality
OMG... your sooo.. smart. I never imagined in my wildest dreams that something that has been assembled could be disassembled.. just sooooo amazinnng.
U r doing state-of-the-art works sir. My respect to you
Another precision job. Well done, interesting to see you do a video on a new phone. Even if it is an iPhone!
one of the best …cause we are all using the simple tools ..lol your techniques are like my style of repair 👍
I am an iPhone hater but i have to admit that the internals of the iPhone is extremely beautiful....no phone comes near to it
im just freeze and crying seeing this video,awesome effort i think with big risk too at all,,,
APPLE:- NOT TELLING THE BATTERY CAPACITY
MEANWHILE RESTORE TECHNIQUE :- I AM HERE TO DESTROY YOU 😂😂😂
really love the video, clean and calm, kudos!
Great teardown mate👌love the shots. Also the charging cable pun is 🔥🤣
Haha cheers 😀
i literally just got an iphone 13 not long ago and seeing how tough it is to break and open up is so good for me since i havent had the best luck with phones in the past
👍
Or bad if something goes wrong
This mobile come in my dream every day😂😂and this man open and close it like its nothing
Finally a good teardown video! Kudos!
it's 5 am and I am stunned and amazed :D
Cool 😀
Not only zero damage to the phone but also zero damage to the package! Never thought about that way of opening these sticky strips.
the only phone - Beautiful inside & outside !
Great Video )
Thanks 😀
I care of my new iphone as my child , after showing this vedio i realize that this is best phone.👌 Thank you👌
😄👍
Really , I appreciate the effort done in this video you treat the package very well
Thanks man
Every detail is so intricate.
You deserver this like and subscribe man ... Good work .. keep it up... You said it all without speaking ..
at least this guy is truly showing how hard it is open an iphone, not like ifixit, they have prior opened it and they make it look so easy
Yes I was a bit disappointed to see ifixit not showing that part
Another fantastic video, fun, and RIP all those plastic tools. Keep up the awesome work!
Thanks P-Rex!
@@RestoreTechnique With a nickname like that, my rap career shall begin!
Perplexasaurus Rex perplexing.
0:46 The best moment
😄👍
Broo if see like u open I feel sad 🙁 because one of my dream to take but I can't crazy more proplms but one day I take it , I like ur videos keep moving 🥰🤘
Thanks 😊
🥰🤘
I am srilankan .This video is very educational.
Great!
Would it be possible to change the lightning port to usb type c port?
Not sure. It would involve a lot of complicated tiny wiring, or a new printed flexible circuit board. And the frame would need the port hole resized, as a USB-C port is thicker and wider. A lot of effort.
Broo he did it
@@zakisiddiqui2272 i saw the video too
I found it he did it 💪💪💪
👌👌👌
It looks very neat on the inside
What destiny do you have brother you are the one who is tearing iphon13 and people like me could not buy even the normal 3000 android phone anyways keep growing love from india❤️
Cheers 😄
Spectacular every detail in how you made the shots of the disassembly of this device by the way today i have it is a good terminal thanks for the video greetings from Medellín Colombia
Looks like it’s getting easier to repair phones 🤭😮 the layout is far better set then any iPhone I’ve taken apart
Agreed
What is that black single flex top left hand side of the phone you left in place ? When disassembling I could not remove it even with heat safely so tore the ribbon need the part name to replace
You deserve more subscribers dude
Thanks for posting this video, very interesting! Also, putting it back together was even better.
I love how Apple design the inside of the iPhone. It’s not messy like other brands.
It’s gorgeous. I think all of their products are like this. Beautifully design both exterior and the interior. So tidy
This year's model is especially tidy inside 👌
This was dope. Needed some background music like some jazz or something soft. But the sound of the disabling was nice too.🔥🔥🔥🔥
Thanks! 🎺
This is my kind of ASMR
😄👌
7:15 the size of similar performing motherboard 20 years back was like that of a 42 inches TV. VLSI has changed our world.
Omg... I am getting fits. 🤣 better to sleep now.
Its amazing how they can cram all that stuff in a 4” by 2” box.
The R$D to make this possible is hyper impressive. Not a fanboy but I love tech and this is impressive.
I’m left wondering if apple’s use of the adhesive and other tactics they take to make replacing things difficult, leads to a more durable and water resistant product compared to the their competitors.
Cool vid. First of its kind for the 13 that I’ve seen. From Nz?? Awesome skills!!!
Australia 👍
@@RestoreTechnique which Qualcomm modem are they using this year? Isn’t it upgraded?
Ini yang Saya tunggu
this video is way too satisfying.😊
😄👍
As an ordinary person, you are helpful because you can disassemble it with cheap and common tools.
It shows u r the master of the I phone
What you did with the power flex that’s connected to the motherboard
Now i know the exact battery capacity thanks 😊
I love the format ❤👍
Here I can't even bend iphone cable
And here you are 🥲
The best I ve ever seen!!!
the hardware of all iphone is clean
Hey there! I am using the iPhone 13 and my speaker on the top of my phone is giving me some very bad sounds and when I am calling on speakerphone people having difficulties understanding me I was thinking to replace the top speaker and microphone. Is this one unit ? which are the parts that I have to order to fix this situation?
which 5G modem chip are using is it the same Qualcomm X55 or Qualcomm X60 ?
Bravo....!!! But where did you bought the assembled repair toolkits.. please, link on description.. thanks
They're mostly from ebay and AliExpress, just random sellers. Unable to keep track of each tool and where i got it from sorry. Tool list in description, just search for those tools on ebay or AliExpress.
I noticed that Apple is putting less in the box. In fact, they might pull an ikea next time.
Step 1: here’s the box
Step 2: assemble the whole thing yourself.😂😂
😆
great sound!
Youre awesome bro ❤
i’m watching right now on my ip13 looks satisfying
excellent! ! ! thank you for your sharing.
Very cool to see iphone 13 inside
So courageous work
😊 thanks
For those who are looking for it. Its 3227Mah Battery. 😁
Marvel of modern Engineering. Great video.
Thanks 🙂
You earned my “subscribe”
Nice teardown, good job 👍
Thanks man 😀
Audio Quality is Amzing
Hello! Can you confirm the sim tray to be upgradedable to the Dual Sim variant? If it does hopefully i could do this to my phone variant
Hi 👋 I can not confirm sorry, I don't know tbh
The number of screws and glue is unbelievable !!
Ikr, I remember some old phones with only 8 screws, all the same size and type 😄
impressive…you deserve to subcribe!!☺️
A15 Bionic 😁 Awesome 😁👍
Wow, tue glue with he glued the screen it's so durable!
That was soo clean :)
Thanks 😀
Now I feel like watching this video I could buy every part for making myself an iPhone 7 plus
Great work👏❤️🔥
Thankyou 😀
Don't know why I'm watching in the midnight
😄😴
Hey! Just wanted to know if the ‘sound damping balls’ are present in the loud speaker in the regular iPhone 13 models?
Yes they are
Great vid! You've just got a new subscriber
Thanks man 😀
A pain in the hole to remove the screen, a repair shops worse Nightmare, Great Video 👌
Cheers 😀
when you get the original adhesive does it make it water resistant again ?
Watch and see 😀ua-cam.com/video/LwtMCpJ9BzA/v-deo.html
Me: A new iPhone in the market
UA-camrs : yyyeeeettt
For opening you better use some Isopropanol for the future. This will make it a lot more easy.
Good quality video
Thanks! I tried some, but probably not enough to make a huge impact.
lovely job mate S2
Thanks mate
Would changing the motherboard fix the iPhone locked to owner?
Tip: Once you get your pry tool in, drop a dab of IPA in the opening and it will easily open up.
I did drop some IPA in at one point, but it didn't seem to help much. I probably didn't use enough.
Love it
I love this video 😂❤
Fabulous stuff, man. Proper professional shit.
Thanks dude 😀
thanks for the video dude!
No problem ✌