I actually had this grill delivered to me today. The tape alone was not adhering to the grill. I also used an oscillating tool to cut out my camera mount. Thanks for showing me a better way to secure it!
Been loving the videos, thank you! 2023 AT4 comes 2moro. Haven't had any luck with these insert grills for a 2023. Do you know of any, the brand below doesn't seem to show one for 2023? Running into that on a few of your awesome mods, some wouldn't work on the 2023 . I didn't know there was a big difference between these years.
I am curious if the surround just outside the overlay grill is painted or wrapped. I am trying to figure out the best way to get mine white. Thank you.
@@Donslife my wife had bushwhacker flares installed on my black ar4 and I just finished installing my 2 inch wheels spacers on 34 inch Toyo at3 tires...now I'm happy! Lol
Very nice. Been thinking about getting one of these for some time but not sure how it will look on the carbon pro grill. Any issues with your illuminated emblem? I've been reading about people having problems with moisture and it shorting out. I wish I had done something to seal mine up before installing.
Don can u recommend a good engine filter system for my AT4 to improve my mpg. I have a 3.0 Duramax diesel and the mpg is awesome but a little more(or a lot) wouldn't hurt.
Hey bud!! You seem to know a lot about these trucks.. do you know how to listen to music without it shutting off after a few minutes with the engine off? Thanks
I would have 100% raged with those cable ties and beat my truck with a hammer ahaha. The wife might have to make you a " (UA-cam Logo) Donslife" decal for a extra cover for your light bar. That would be sick. She did a nice job on that AT4 logo
Sir I have a 2021AT4 and am looking for a grill cover for my truck. Just wanted to know if you knew where I could order one that has the camera holes already cut out.
Same as my current 1500 At4 : Automatic locking rear differential When the differential senses a significant difference in wheel speed, it locks to turn both rear wheels in unison for added traction The Eaton Locker senses a difference in wheel speed of approximately 100 rpm
The water takes dirt with it. The overlay is not glued on. You used zip ties. So your overlay vibrates while driving. So basically you are sanding the finish off of the factory grill. I figure there would be a lot less damage if it was not covered with the overlay. It would however, have the rock chips your overlay has.
Do you have this overlay too? If not, I assure you the 3m foam tape left as is acts as a cushion and keeps it snug and it doesn’t vibrate. You can see the dried water spots. The two spots that have finish peeling are not scuffed from vibration either. I own a painting business and it finish is failing. Had the overlay not been in place, I suspect small rock chips would have it peeling worse.
Bro. Lol. Did you just say she made you a “Deck-ul “ ? I’ve literally never heard that. Lol. Anyway. That grill looks great either black or white. I personally like the black the best
@@Donslife lol 😂 I’m just pickin at you brother. Love your videos. I just bought a 2022 Chevy Trail Boss a couple of weeks ago. Your in depth reviews of the mods you do have inspired me to dive into mine with a few mods straight away. Thanks buddy 🤘🏼
linktr.ee/donslife - Links to all of my products and discounts
The black grill contrasting against the white truck looks amazing!
It does pop now!
I like how the black grill looks more than the white. Just my opinion. Looks great either way. Nice video
Thanks man!
The black looks amazing. And the AT4 sticker is a nice touch. Love it
I actually had this grill delivered to me today. The tape alone was not adhering to the grill. I also used an oscillating tool to cut out my camera mount. Thanks for showing me a better way to secure it!
Much better with the black great job 👍✌️🇨🇦
Ya it turned out well
I really like the black grille! Compliments the other elements really well.
now that grill looks fire am ordering mine ty
Yea it looks great!!
Black Grill on white truck looks dope!!!!
I can’t stop looking at it 😂
I like the black grill better and the AT4 sticker is a very nice touch also!
I like the black grill better too!
Also agree the black grill has more pop. Very nice
That looks GOOD 🙌🏾
I agree, thanks!
U sure do a good job on your vehicle!
Very nice. I think the black grill looks more distinctive.
Now that pops! Nicely done 👍🏻
Great video!! Black looks amazing!
Nice look !
Very nice i gone order mine soon look very nice that change the front of the truck very good job
Been loving the videos, thank you! 2023 AT4 comes 2moro. Haven't had any luck with these insert grills for a 2023. Do you know of any, the brand below doesn't seem to show one for 2023? Running into that on a few of your awesome mods, some wouldn't work on the 2023 . I didn't know there was a big difference between these years.
Way nicer apperance Don! Excellent upgrade!
I think I will be ordering that black overlay grill. I’ve been told I’m getting my 2022 Sierra AT4 mid March in Okotoks, AB.
Love your videos.
Awesome! That’s exciting! One of my sisters lives there
Looking good!
white looked good, but the black one for the win! Wonder how it would look wrapped with the Camo...
Looks great! any rattle from the grille cover with just the zip ties holding it on?
No rattle, no problems
Hi Don, awesome videos as always! Just in case you didn’t know by now, Dremel has cut wheels that are steel reinforced and work great!
Thanks for the info! They broke all the time before getting full use out of them
@@Donslife same here, the maroon colored ones never last, you spend more time changing out the broken cut wheels🙄
I am curious if the surround just outside the overlay grill is painted or wrapped. I am trying to figure out the best way to get mine white. Thank you.
My grill surround piece is white (factory paint) in this video. Now my truck is green and I wrapped it along with the rest of the vehicle
i put grill carbon with stanstile
You have very good content and while you might get the glory , I'm going to give a shout out to your camera person !
I give her all the glory! Thanks Stuart
Ask the wifey make more logos. Looks wicked in black
She will make as many as I can handle!
Where did you get that at4 off road addition on the front of you truck?
It's all looking great!
It’s a decal my wife made. I show it in this video
@@Donslife I'll have to check that out...looks great
@@Donslife my wife had bushwhacker flares installed on my black ar4 and I just finished installing my 2 inch wheels spacers on 34 inch Toyo at3 tires...now I'm happy! Lol
Looks good
Wow...beautiful...where did u get that AT4 offroad below? I absolutely 💯 love it
It’s in the video! Wife surprised me by making it with her new machine. It is right after I start cutting the grill for the camera
Maybe I need that black grille! 🤔
😃
Very nice. Been thinking about getting one of these for some time but not sure how it will look on the carbon pro grill.
Any issues with your illuminated emblem? I've been reading about people having problems with moisture and it shorting out. I wish I had done something to seal mine up before installing.
No issues on my end at all but I agree sealing it would be a good precaution. I think the grill would be great on your Carbon Pro.
Huge fan of your build bro if you upgrade your truck with the tow mirrors can you sponsor me with your stock ones??? 🙏🏼
Don can u recommend a good engine filter system for my AT4 to improve my mpg. I have a 3.0 Duramax diesel and the mpg is awesome but a little more(or a lot) wouldn't hurt.
If I had the 3.0 Diesel, I’d check out S&B www.sbfilters.com/cold-air-intakes/silverado-sierra-1500-duramax-3-0-intake-75-5137?variant_id=712
Thank you sir, you and your video's and channel are greatly appreciated 👍
Anytime! Thanks for watching and hitting that like button!
Hey bud!! You seem to know a lot about these trucks.. do you know how to listen to music without it shutting off after a few minutes with the engine off? Thanks
That’s not something I have found a way of adjusting 😞
I would have 100% raged with those cable ties and beat my truck with a hammer ahaha. The wife might have to make you a " (UA-cam Logo) Donslife" decal for a extra cover for your light bar. That would be sick. She did a nice job on that AT4 logo
Sir I have a 2021AT4 and am looking for a grill cover for my truck. Just wanted to know if you knew where I could order one that has the camera holes already cut out.
Unfortunately I am not aware of one with the camera hole already cut out
Thanks don for the quick response, please let me know if you hear of one
How do you get the louvers to open up?
Mine have always been in the open position when the truck is off. I didn’t do anything special
“In my off time while I’m not at work” , I’m dyin’ to know Don, whats your line of work? Lol
Why would you laugh at me? Corporate HR and own a renovation business
@@Donslife I say lol way too much, don’t take it personally! You do such a good job on these tube vids I’m surprised you ain’t full time yet!
@@iiBiiRD All good 👍🏼 I just didn’t know what you meant by that 😂 Thanks for clarifying. Dedicating more time to UA-cam would be crazy 😜
Does the 2022 gmc sierra 2500 at4 6.6 gasser get locking rear diff?
Same as my current 1500 At4 :
Automatic locking rear differential
When the differential senses a significant difference in wheel speed, it locks to turn both rear wheels in
unison for added traction
The Eaton Locker senses a difference in wheel speed of approximately 100 rpm
The water takes dirt with it. The overlay is not glued on. You used zip ties. So your overlay vibrates while driving. So basically you are sanding the finish off of the factory grill. I figure there would be a lot less damage if it was not covered with the overlay. It would however, have the rock chips your overlay has.
Do you have this overlay too? If not, I assure you the 3m foam tape left as is acts as a cushion and keeps it snug and it doesn’t vibrate. You can see the dried water spots. The two spots that have finish peeling are not scuffed from vibration either. I own a painting business and it finish is failing. Had the overlay not been in place, I suspect small rock chips would have it peeling worse.
GMC needs to be red as well. Goes well with the Red AT4 theme.
Where did you find that white grill overlay?
amzn.to/3uJa0DJ
I painted a black one, white
We’re do you find the white grill ?
I painted a black one white. I made a whole video on the experience
ua-cam.com/video/_WUArnKMveI/v-deo.htmlsi=12vSc-UO3sNUTEUj
I'd buy the wife's decal. Let us know where to send the $$
Anybody have any suggestions for the headrests? Mods to make them tilt or aftermarket?
Bro. Lol. Did you just say she made you a
“Deck-ul “ ? I’ve literally never heard that. Lol. Anyway. That grill looks great either black or white. I personally like the black the best
😂 Decal can be pronounced ‘Dee-Kal’ or ‘Deckle’ British/Canada/US differences. I knew when I said it, I would get lit up
@@Donslife lol 😂 I’m just pickin at you brother. Love your videos. I just bought a 2022 Chevy Trail Boss a couple of weeks ago. Your in depth reviews of the mods you do have inspired me to dive into mine with a few mods straight away. Thanks buddy 🤘🏼
@@bamaknifeguy that’s awesome 👏
Would you sell the white one I'm interested
and i thinks u take auxbeam switch 🤔
Hi quick question sierras grill in AT4 and sierra elevation is the same or no I just want to purchase a grill overlay but I can’t find it
Sorry friend. Unfortunately they are different. The AT4 and SLT are the same
@@Donslife ohhh ok that is why I can’t find it thank you
@@DFRANCOO80 no worries man
Keep it black
I just might do that! 😊