Це відео не доступне.
Перепрошуємо.
How to Remove SRS Airbag Control Module & Seat Belts on a Honda Accord | MyAirbags
Вставка
- Опубліковано 12 сер 2024
- How to remove SRS Airbag Control Module & Seat Belts on a HONDA ACCORD 2015, 2016, 2017, 2018, 2019.
This video shows complete or partial disassembly of the center console to remove the airbag control computer module and front seat belts.
🟥 SUBSCRIBE : bit.ly/48ohf4W
IN THIS VIDEO
0:00 Introduction
0:30 Tools You Will Need
0:48 DO THIS FIRST - How To Disconnect Battery
1:53 Interior Console Side Panel & Air Vent Removal
2:44 Three Things That Can Cause Airbag Light to be ON
4:18 Interior Console Side Panel & Air Vent Removal Continued
5:14 Airbag Module Location and Removal
7:44 Seat Belt Retractor Location and Removal Instructions
11:11 How To Send Us Your Parts for Reset & Rebuild
CONTACT US :
🌐 www.myairbags.com
☎️ Call Or Text : 855-770-4055
📍 1707 Enterprise Drive, Suite D, Buford, GA 30518
📒 Become a member of our free Community Forum: forum.myairbags.com/
📝 Visit our blog: blog.myairbags.com
🟦ABOUT US
Since 2006, our family-owned and operated small business is proud to provide industry leading repair services with quick turnaround. Thousands of car dealerships, auto repair shops, auto body shops, and DIYers trust MyAirbags to quickly diagnose and service their automotive safety electronics and equipment. Our Repair and Return services will save you time and money.
At MyAirbags, our services are 100 percent guaranteed or your money back. My Airbags goes to the root of the problem and uses new, upgraded components to ensure the issue is resolved and does not reoccur. We make your experience as effortless as possible. Once we receive your shipment, our trained and certified technicians will run tests to identify the source of the problem to repair it. In addition to our repair services, we are proud to provide exceptional service and technical support while also doing our part to reuse and recycle to reduce e-waste.
#hondaaccord #airbag #seatbelt
Thanks a lot for the video and services; it made me save tons of money (dealership asking $2000, local shop asking from $250 to $900). It also made the sign go away as soon as I reinstalled the module. Appreciate your work 🙏
Jatan, Thank you for your feedback. We are very pleased to receive testimonials like yours!
You guys saved me a bunch of time again!!!! Thank you!!!!
ragomonkey, Great to hear, thank you for commenting!
thank you it was grate explanation you guys awesome thanks again
Quality Automotive Group, Thank you, I'm glad it helped! Thanks for the leaving a comment!
Great video 📹 👍
Thank you for commenting!
I like it
Thanks
Thanks for the info
No problem 👍
nice video! thanks!
Hlust444, thank you for your comment! We appreciate the feedback!
www.myairbags.com/
Great detailed video!! My 2015 Honda Accord was in a flooding. Water came into the cabin up to the seats, so obviously the module was under water. Airbag light is the only light on. I haven’t ran a diagnostic on it, but will the module go bad if submerged in water?
Yes if you had water/flood damage then airbag control module will be bad for sure. You will need to get a replacement. Get new or used. Make sure to get same part number. The part number will be on top of the module. Used airbag control module can be purchased at car-parts.com. However, if you did not have water damage and vehicle was in an accident, we can reset the module. Visit our website for more info myairbags.com
Pls can you advice me on my ACURA TSX 2010, If i replaced my Airbag module with the module removed from other car without airbag deployment, will the airbag light go away or the module is plug and play. and would my car still needs to be reprogrammed by the dealer. Pls advice me on this.. Thanks
Gabriel, when you choose to go with a replacement module, first you have to make you find a replacement module that has the same exact part as the original. The model/part number on airbag / srs modules for Acura and Honda always begin with these number " 77960 ... "
Once you find a good working module with the correct match by part number, THEN you would have to program the replacement module to the car since its not original.
You can avoid all this, by using the reset service. Our reset service costs a fraction of new parts and because its original to your car, programming is not needed. This is why our customer prefer the reset service we offer. The service is only needed for after accident modules.
If your car was in an accident you need the module replaced / reset along with the deployed seat belts / buckles, you put in your service order here: www.myairbags.com/product-category/repair-return/airbag-module-reset/
Thank you for your comment!
Do you guys recalibrate seat positioning sensor
If you get a Seat positioning sensor / or occupant sensor code, that code is stored in OCM / OCSM Occupant Classification System Module. Your Occupant module may be disconnected. Check the plug /wires leading to that sensor. Its located on the front passenger seat on the side, or under the passenger seat, right on the seat itself, (not on the floor). If you replaced the front passenger seat for any reason, go to the old seat, remove the original sensor and install it on the new seat. Finally, if you check the plug / wires and this is not a situation where you replaced the front passenger seat then the occupant sensor may need to be re-calibrated or replaced. Usually the re-calibration does it.
I've got an 2018 honda accord, I had 3 warnings come up, 1 was the batter ( it has been replaced) another ended up being the driver side seat belt buckle sensor ( replaced also) and I still have 1 light remaining on and it's for the Supplemental restraint system??
Do you have the actual DTC code that came up?
If your vehicle was in an accident then the airbag control module needs to be reset. Here is more info
www.myairbags.com/product/airbag-module-reset-3/
Hello MyAirbags I have a small issues. My 2017 accord has 12K miles and out of nowhere the airbag light came on in the dash but I never wrecked the car or messed with the airbag system. I got a scan tool and it said “front passenger impact sensor not sending a signal”. Where is the sensor located ? I can’t seem to find it. Is it like the seat airbag sensors where by just unplugging and re plug it solves the light on the dash ? Thanks.
Steering airbag sensors is located in the front panel of your radiator support , it has 2 sensors next to the horn when you pop your hood up , you will see it
Thank you for commenting. For your needs and service: www.myairbags.com
Does the seatbelt have to be rebuild even if it is still working properly and the seat belt light goes off, after a wreck?
Jean Claude, If the seat belt is working properly and you do not get any codes about it, then it may be good to use.
How do you fix airbag light on dashboard of 2008 Honda Accord EXL Coupe?
Myles, The first step is to diagnose the airbag light. Hook up the scan tool / scanner to the car and read the airbag codes. You connect the scan tool right into the OBD port/plug. Its usually located below the steering wheel, on the left. You are welcome to reply to us with the trouble code that it reads.
Just to be sure, while I mail you the control unit, I can connect the battery and drive the car??
David,
If the car was in an accident, you can use our module reset service and seat belt service. We have an article addressing your question: myairbags.zendesk.com/hc/en-us/articles/115012408547-Can-I-drive-my-car-truck-while-the-airbag-module-is-removed-
Is the EDR integrated on the SRS modele on accords?
@Luis M Sanchez , Yes the Event Data Recorder is the same as the Airbag / SRS contol unit. If you need the SRS module/unit reset due to an accident, we can reset it for you. Our customers use our site to place their Service orders: www.myairbags.com
Will be sending my airbag module in but my seatbelt looks fine and didnt deploy. Do i still have to send seatbelt in too? Will it throw a code?
Anuar, Seat belts do deploy in an accident. Sometimes they seem like they work fine but the actual pretensioner part is deployed. If thats the case, you'll simply get a code letting you know. Once you fix them, the code will clear out. We can help with the module and seat belts. www.myairbags.com
Very Informative, Great Video! Can I Ship From Europe
Collin, We can definitely service the airbag computer module for you. You can start here: www.myairbags.com/
Here’s a question for you guys: how do you pull the codes that the SRS module is throwing? I’ve replaced almost the whole system and it’s still giving me the light on the cluster
Dom P,
The first step is to diagnose the airbag light. Hook up the scan tool / scanner to the car and read the airbag codes. You connect the scan tool right into the OBD port/plug. Its usually located below the steering wheel, on the left. You are welcome to reply to us with the trouble code that it reads.
Hello I have a question. My airbag light dosen't come on when passenger is in seat.. is that normal? 2016 honda accord sport.
Which light specifically? The main airbag diagnostic light or the passenger presence indicator light? The main diagnostic airbag light you see in your instrument cluster should only remain on when there is a problem with the airbag system.
I have a 2016 honda civic but I don't have a scan tool to retrieve codes, how can I known what's the issue?
Victor, the only way to properly diagnose the airbag light is to use a scanner / scan tool to read the codes. Sometimes body shops and auto parts stores will offer diagnostics for free.
2013 Honda accord airbag light on no codes, I have already changed the module and passenger seat belt.Please help to take off the light....
Gharib, Read the airbag codes with a scanner / scan tool via your OBDII. If you can reply with the codes, we help narrow down the airbag light problem.
No codes are detected
Can you read the crash data from the SRS?
We don't provide detailed report on the data, but we can clear it out so you don't have to purchase a expensive brand new replacement module. We also offer service on the seat belts. myairbags.zendesk.com/hc/en-us/articles/115012432888-Airbag-Light-is-On-After-Vehicle-Accident-What-can-I-do-to-fix-it-
Location of module on 2018 Honda Accord
This is a 2017. 2018 should be similar or same.
So my SRS module is not communicating with the diagnostic device. The dealership is telling me that they have to do the programming for the new one and it will cost me $800 to replace. Can I replace it myself and program it or are they telling me the truth?
Tyler, If the car was in an accident, we can reset it for you for a fraction of that cost. If it went bad / fried on its own, we may have a replacement for you in our inventory. You would need to search and match by part number only to make sure it will be a good fit for your car. Our inventory here: www.myairbags.com/product-category/parts-in-stock-ready-to-ship/airbag-control-modules-ready-to-ship/
@@MyAirbags
So I drove through some water and the next day my airbag light came on. No accident and Im wondering if I dried off the srs module if it might work. Also the dealership is telling me that the srs system has to be programmed to the vin number of my car or it will deploy the airbag and thats why they need to do it. Is that just a scam statement to get me to use them?
If its water damage, yes it can be true. If you get down to the module, you should see a part number on the top that begins with "77960-....."
Use that number to find yourself a replacement.
How can I clear the air bag light off my dashboard? On this car..? I replaced the interior and now the air bag light is on my dash…
If your vehicle was in an accident then it will have crash history in the airbag module that needs to be sent to myairbags.com to be reset. But, if the vehicle was not in an accident and light just came on one day or you did some work on your car and then the light came on, it will be best to check all wiring and then if light still on, have it scanned with a diagnostic scan tool for codes.
For my honda accord 2008 v6, the srs code shows up always, the passenger side airbag off light shows up always.... the seat belt light has disappeared and it doesn't work anymore when braking. there was no accident happened to my car, I remember this happened after changed the battery. What could be the problem?
Hi,
The first step is to diagnose the airbag light. Hook up the scan tool / scanner to the car and read the airbag codes. You connect the scan tool right into the OBD port/plug. Its usually located below the steering wheel, on the left. When you have read the trouble codes, you are welcome to reply back here with the codes.
@@MyAirbags I scanned my car with 2 scanners equipped with SRS function, but it got no error code... the airbag light is still on.
@@MyAirbags I finally got a code :53-30 internal failure of srs unit. Is this repairable?
1. NOTE: Refer to the correct removal and installation procedure for all SRS components being installed.
When any deployable device or combination of devices have deployed and/or the airbag control module (ACM/RCM) has DTC 5-1 in memory, the repair of the vehicle SRS is to include the removal of all deployed devices and the installation of new deployable devices, the removal and installation of new impact sensors and the removal and installation of a new ACM/RCM. DTCs must be cleared from all required modules after repairs are carried out.
Vehicles with Occupant Classification Sensor (OCS) system
2. NOTE: After installation of new Occupant Classification Sensor (OCS) components, carry out the Occupant Classification Sensor (OCS) System Reset procedure as instructed in the workshop manual. Refer to the appropriate workshop manual for OCS system removal and installation procedure.
When a vehicle has been involved in a collision and the Occupant Classification System Module (OCSM) has DTC 5-1 stored in memory, the repair of the OCS system is to include the following procedures for the specified system:
For rail-type OCS system, inspect the passenger side floorpan for damage and repair as necessary. Install new OCS system rails. Do not install a new OCSM unless DTC 5-1 cannot be cleared.
For weight sensor bolt-type OCS system, inspect the passenger side floorpan for damage and repair as necessary. Install a new seat track with OCS system weight sensor bolts. DTC must be cleared from the OCSM before carrying out Occupant Classification Sensor (OCS) System Reset. Do not install a new OCSM unless DTC 5-1 cannot be cleared.
For bladder-type OCS system, inspect for damage and repair as necessary. If installation of an OCS system component is required, an OCS system service kit must be installed.
More info here: myairbags.zendesk.com/hc/en-us/articles/115012955948-SRS-Airbag-DTC-Code-5-1
@@MyAirbags code 5-1 you mentioned and the code 53-30 showed up on my car means the same thing? I don't really quite understand the note you posted here.
Can you reset the airbag module if I sent it to you?
What about the fourth thing: the crash sensor?
We're just referring to the "3 Main things"
The crash / impact sensors usually do not need to be replaced unless they are physically cracked or damaged.
More here: help.myairbags.com/hc/en-us/articles/360001391787-How-to-Change-SRS-Impact-Sensors
This is not a "smiling situation " Eli.
Can you start you car without the module
Dennis, the car engine does start without the module.
More info here: help.myairbags.com/hc/en-us/articles/115012408547-Can-I-drive-my-car-truck-while-the-airbag-module-is-removed-
My Airbags what is the code BOOAO-54
My Airbags i send my honda 2016 srs module with you guys and now show BOOA-54 what means that code
Code B00A0 is stored in OCM / OCSM Occupant Classification System Module. Your Occupant module may be disconnected. Check the plug /wires leading to that sensor. Its located on the front passenger seat on the side, or under the passenger seat, right on the seat itself, (not on the floor). If you replaced the front passenger seat for any reason, go to the old seat, remove the original sensor and install it on the new seat. Finally, if you check the plug / wires and this is not a situation where you replaced the front passenger seat then the occupant sensor may need to be re-calibrated or replaced. Usually the re-calibration does it.
Car tape code
Car tape code?
How to turn off airbag
For safety and liability we can't give advice on how to disable safety features on vehicle. We specialize in restoring the system back to its original design and function. Specifically the module and seat belts.
www.myairbags.com
Lol let me tell you something they must’ve cut out at least an hours worth of time getting those bolts out. Because it is NOT easy!
It does get easier the more you do it!
You’re right Ronin. I just spent WAAAY more time taking mine out and also had to use a few extra tools. A smaller ratchet set and a Philips screwdriver to take off the plastic piece on the passenger side since there’s not a lot of room to work. That bold on the driver side is a pain because your ratchet is close to the gas pedal which is another reason I had to use a smaller ratchet. Glad I finally got it out though.