@@DreadNauts class 2 is the best but not really for high stakes clamps because it makes is realllly difficult to mount pistons where it’s still efficient. Hence why in my opinion class 1 lever
@@DreadNauts A Class 1 lever can be just as good as a Class 2 or just as bad as a Class 3 depending on how you build it. Depending on how you build your class 1 lever it can exert >, = , or < 1 amount of force. But to answer your question, in order of mechanical advantage, yes it would be that. According to the legacy pneumatics VEX article all the actuators output 12lbs of force at 100psi, so that the 1 variable I use when I do calculations.
For the sweeper multiple possession part, our state is very strict as well. If you make the arm long enough that the rings do not contact it and the intake at the same time then you should not meet the possession definition. Always better to be safe though!
Class 2 levers always have greater than 1 mechanical advantage, Class 3 levers always have less than 1 mechanical advantage.
@@KingSupreme125 rip I mixed it up again
So basically, it’s like this(based on mechanical advantage)?
1. Class 2 Lever
2. Class 1 Lever
3. Class 3 Lever
@@DreadNauts class 2 is the best but not really for high stakes clamps because it makes is realllly difficult to mount pistons where it’s still efficient. Hence why in my opinion class 1 lever
@@DreadNauts A Class 1 lever can be just as good as a Class 2 or just as bad as a Class 3 depending on how you build it. Depending on how you build your class 1 lever it can exert >, = , or < 1 amount of force. But to answer your question, in order of mechanical advantage, yes it would be that. According to the legacy pneumatics VEX article all the actuators output 12lbs of force at 100psi, so that the 1 variable I use when I do calculations.
For the sweeper multiple possession part, our state is very strict as well. If you make the arm long enough that the rings do not contact it and the intake at the same time then you should not meet the possession definition. Always better to be safe though!
Judge: "so how does the mogo clamp work?"
Will: "physics"
@@62629W facts
Can you send the link for the Mc master car spacers?
@srishanthjakka416 if you look on vex forum 515r made a post about it
og controller mod layout
one of your intake motors is out
@@muradmalik yeah I fixed it right after lol got some abuse at comp 💀
Are you going to continue with hood?
@LucasWheeler-xc1kp probably
Very nice
Skip to 8:39 for hood lady brown part
Big horn on top of
W
Yooooo such a w bot