@@MamdouhAzmy you can get them from mcmaster carr or the robosource ones that just came out! (1/4" OD). i would advise cadding it first so you have the proper length so you don't need to cut them down.
its called a scuff controller. and i just found a cad model online. i did have to sand down some of the edges tho to make it smooth. makerworld.com/en/models/202620#profileId-222974
it only overheats after testing and running it for like 10-15 mins. so its good as long as each system(first stage axle, transition axle, hook axle) are all free spinning and have minimal friction :)
FOUR WIDE DRIVETRAIN 😎 also just making sure that every insert placed on the wheels are free spinning with that specific screw, because some inserts dont spin well with some screws for some reason. also making sure that you have enough wiggle room(i can move my wheels and gears about 1-2 mm side to side so that in the case that my drivetrain spacing shrinks, the wheels still spin perfectly fine.
14:22
Love the part where it shows skills lol (great vid tho!)
W vid
Tricked me with those plates thought they were magplates
they'll never fall out in game!
@@olliedaoriginal naw magplates are so much better
Good free spin
I really like your robot drivetrain. I was wondring what are the red screw holding the drive gears?
those are 6mm spacers, if thats what you were talking about. we use them to keep the drive gear from shifting around.
@@olliedaoriginal Where I can get them?
@@MamdouhAzmy you can get them from mcmaster carr or the robosource ones that just came out! (1/4" OD). i would advise cadding it first so you have the proper length so you don't need to cut them down.
Ollie is so sigma
i gotta pass u in subs
@@olliedaoriginal yessir
Do you still have the cad files of the controler buton pusher things * idk what they r called *
its called a scuff controller. and i just found a cad model online. i did have to sand down some of the edges tho to make it smooth.
makerworld.com/en/models/202620#profileId-222974
How does one motor for intake and conveyor work for you? Will it overheat
it only overheats after testing and running it for like 10-15 mins. so its good as long as each system(first stage axle, transition axle, hook axle) are all free spinning and have minimal friction :)
allicne?
how do you make the drivetrain so frictionless?
squaring and good build quality
FOUR WIDE DRIVETRAIN 😎
also just making sure that every insert placed on the wheels are free spinning with that specific screw, because some inserts dont spin well with some screws for some reason. also making sure that you have enough wiggle room(i can move my wheels and gears about 1-2 mm side to side so that in the case that my drivetrain spacing shrinks, the wheels still spin perfectly fine.