DIY Arduino Uno CNC Writing Machine with Benbox Firmware
Вставка
- Опубліковано 26 сер 2024
- DIY Arduino CNC, Arduino Writing Machine, with Benbox firmware, how to setting benbox software, online 2d print
Link firmware and software benbox : drive.google.c...
Thanks a lot helped me to complete my project and also i got to know how the benbox application works
you're welcome sir, i'm glad to hear my video can help other people. :D
شكرا على الروابط المفيدة وتحية لك عزيزي
ممكن تبعتلى اللينك مش عايز يفتح معايا
Hey I'm having trouble with servo idk why it's not respond..,I hv attached signal wire to z+
And other two to the 5v(red) and gnd(brown)
Can I check servo jogg mode and how?
the motors of CD Drive are heating too much as soon as i start writing anything. any help??
Very Very Thankyou Sir
THANK YOU so much brooo....
Hello, i tried same as your project but there is no movement in stepper as well as in servo motor. Pls help and guide me
Hi, I'm doing a similar project but my problem is that I can't find the fireware you use.
could you help me please thanks.
I'm having difficulties updating the firmware. It says semaphore timeout period expired. Plz solve this issue.
In the Benbox folder there are 2 HEX files...¿what do they serve each one for?
Can you send me the drivers it doesn't want to open with me
Sir that benbox is not opening on my device what should I do for it☹️🥺
The link does not want to open. Do I know what the problem is, and is it possible for someone to send me the driver?
Sukses terus mas!
terima kasih mas
Can I make my own photos??
and how's that??
thanks
My plotter drawing letters on another what problem
What is code for arduino bro
My servo motor movement is very low
Help me plz
bro my problem is the frimware laser hex file not updating to arduino plz give reply 🙏🙏🙏
could you screenshot ur problem and send to my email? iswansya13@gmail.com
servo not moving stuck
I have a question. Why did you power the cnc shield? Couldn't you power arduino instead?
That power for motor stepper.
hola señor tech wan, a cuantos mAh se calibra el driver drv 8825 ?
Hola senor, drv8825 maks 1.5 without heatsink
I want to purchase this machine
Can i use L293d motor sheld?
yes you can
Sir plz bataye na writing machine banane ke baad direct benbox use kare ya phir koi coding hota hai our other software nahi hota na benbox se direct writing hota hai na plz sir reply me
only use benbox software sir, firmware benbox is coding for arduino , upload firmare to arduino from benbox software.
@@TechWanChannel thank you sir
@@rohanwayangankar6498 youre welcome sir
I can't open the file in the description sir.
can you drop your email?
What was the total cost for making it
estimated price
arduino uno = 6 $
cnc shield and driver = 3.5$
servo = 1 $
dvd mahcine waste = 3 $
cable = 1 $
@@TechWanChannel ok ty
Hello sir I'm from Nepal 🇳🇵...
I loved your contain so I'm also trying to make it. But tw problem is
Using the benbox software sir...
When I choose the firmware sir ... There no option of ( firmware lazer. Hex ) in option I also download this firmware lazer .hex but I don't know why this is not showing in downloads and option .... Thats the main problem for me in this project ....
Sir can u make another video about adding frameware ....
Or can we make a contract from facebook that's really helpful for me ... And I hope that u help me out ... Plz replie sir
I'm also trying to make CNC writing machine sir. I'm in trouble sir help me out ....
Can u give me your facebook ID or Insta plz sir😖
dear sir, in my video already complete tutorial until how to download firmware, but anyway u can contact me in Insta, my insta id in my channel description
@@TechWanChannel Thank u sir for replie ... I hope that from your help I'll make my project
how many volt that cnc board use? 5v?
12-36 volt CNC shield
hi TechMan, i have 2 questions...
1) this firmware works for me? my setup: (arduino uno +CNC shield , but 50x50cm with Nema17)
2) i use 328p driver, but i buy DRV8825 idont Know the "Vref" potentiometer
PD: SUSCRIBED =)
1. As i know i never try but its possible
2. Do you mean Vmot?
@@TechWanChannel Vref
-voltage betwen Potentiometer and GND-
(dat voltage controls the current max sended to the motor, i search info and for drv8825 Vref = Imax(motor suported) / 2
i gonna test it tomorrow =)
where to attach servo motor?
in z+ pin on cnc shield
everything is going well except servo how to solve that
What problem with ur servo? ur servo is good? connection good? if good i think u must see my configuration for servo in my video, because first time i use benbox also have problem with servo
@@TechWanChannel i did all like you did but servo did not work
@@ahmedhegazi8039 hmmm, did ur servo is good condition? check cable, and setting for servo step in benbox
Hlo
Do we need to coding in Arduino?
no bro, just upload firmware, that is code for arduino
Sir, video helped me a lot. Thank you. Can you Please share the firmware with me.
can you share please
@@signinppp link firmware in description sir
done sir
bro he servo motor is not working , i kept all the settings exactly identical please help
ur servo in good condition bro? please check wiring
@@TechWanChannel Yes bro , I used it in a different Arduino and uploaded a simple servo code , it worked perfectly
@@TechWanChannel help bro
@@TechWanChannel I also reinstalled benbox and hex code ,still same results
@@rikengothi last time i have same problem with servo, please check servo setting make same with my setting
bro how to change language it is in chinese
I'm sorry i dont know bro
Can you share
This is link for benbox software and firmware sir.
drive.google.com/file/d/1sDVG8XI76QbOF5f7ZClvVCc_uXqI4FPQ/view?usp=sharing
can you share with me
done
sir please tell send me a link for arduino code
Already have in description sir