X and y works fine but i have issue with the z axis its not going up or down even when i do M03 S80 im using cnc3018 just put a pen in the spindle and unplugged it
I have set up my GCode Sender and it recognises the arduino uno but when I make a command nothing happens. Specifically, the motors don't do anything. Any thoughts on how to fix this?
sir i am looking to add more fonts for km laser extension converting to hershey text is their a extensive vedio how to add diffrent svg fonts or stroke fonts i am enable to do it can u help me out thank you
Sir im facing a problem, after all setup when I'm manually moving the machine by pressing x+ axis it's moves on diagonally means(x+y+) same to others sides plz reply sir😢🙏🏻
@@nishant1422 No, I Tried and I solve every problem except this. I'm Not Stopped Continuously I'm Trying To Solve. However if you have any other problems you can ask me, may I able to help you.
Hi șir,please help me with advice about Drawbot, after extracting the file the icons from the files do not appear and if I want to open one it asks me to choose a software to open it with and I don't know why
HI, I had a small question, we are going to make this robot as a group of university students, I have to make the code for the micro controller, my question is that how can I convert the G-code, that is produced by INKSCAPE and transferred by G-Code sender to microcontroller, to orders for my stepper motors? Is there any resources that can help me to write the code ? thanks a lot.
when i click on x or y axis and remove it , motors keep moving in those directions and even try to move after reach end point. help with this problem please
Do not remove M5S0 as it says spindle off /speed 0, In this case you are using the M3/M5 gcode to move the pen you are drawing with or if you are using a laser you are telling the laser to turn on or off,Now if you are not using a pen or a laser and want a standard 3 axis device using all stepper motors than go to settings by typing %% in the command line of ugs and find the line which says laser mode and change it from a 1 to a 0 . now you are in 3 axis mode.
@@sasitharshanvv5672 it is taking 2 hrs to complete the drawing, is there any other way so that we can disconnect computer, like using arduino Uno micro controller?
My cnc pen plotter is going on the wrong side. When it draws the picture, it is not in this direction, but it is moving to the left side. how to fix it? Is it a software problem?
I built a plotter but when I send gcode to the machine it draws it at a 45 degree angle. Any ideas on the issue or troubleshooting would be appreciated.
Hi dude this is nice job , i made the same one but i having a problem about moving when i press the "X" to move X axis it just moving 45 degree angle why is that happen
Hello, Can you helped me why motor servo can’t work up and down when start running. But when I test commented M03 S80 and M05 S10 it worked up and down normally. I hope you have ideas for help me. Thank in advance 😊
Sao máy của mình chạy được tầm 2-3 phút là phần mềm ugs bị treo luôn ko thao tác được máy thì dừng phải rút dây kết nối ra cắm lại rồi lại phải chạy lại từ đầu mong bạn chỉ mình cách sửa lỗi này với😢
In the universal gcode platform software,the image i have inserted is showing 2000*3000(l*b)(mm).. so machine is making noise and being stuck.. the maximum length the axis can travel is 200mm..how to adjust the length..pls help
EXCELLENT JOB, THANK YOU SO MUCH, CAN YOU HELP ME TO UNDERSTAND AND FIX MY PLOTTER SETTING TO LIMIT THE X AND Y-AXIS TO THE SECURE END OF THE TOUR, I INSTALLED EVERYTHING AS YOU DESCRIBED BUT NOW MY MACHINE IS HITTING THE END OF THE AXIS AND START VIBRATING THERE, PLEASE HELP OUT.
once again thank you you are a master including so much useful information in one video al the community appreciates your talent and dedication. I could not find the color plotting tutorial.
I finally find by myself how to control it, it was different that all tuto on the internet. Thank you for your video.
You still using it?
I BOUGHT A PLOTTER WORKING NICE.THANK YOU
Hlo b to
I want to talk with u ?
Can u give me your number and them tell me how you can setup this plotter?
Who from out of focus 👍🏻🤣
My bro
Me
Nanum bro
Me 🔫
I am
Bro
fantastic with this deep intro. its a video Ive been searching for after Ive build a machine. Thank you
Looks great. Cant wait for your next video. Thanks for sharing.
very very thanks bro
pcb makung cheyyan njan inkscape kure try cheythirunnu with my cnc
ee video kandappol idea kitty
Ohh this is very usefull video to us..Thanks a lot
Congratulations, I succeeded according to your model, thank you
Congratulations, I succeeded according to your model, thank you
What about the program for arduino.
It is same from video grbl 0.9i
@@sebi325e were is Arduino code
Excellent explanations !!! Thanks so much
It's work for me, thank you very much
Excellent video and explanations. Thank you!!
thanks for you tutorial. It`s so helpful to me.
X and y works fine but i have issue with the z axis its not going up or down even when i do M03 S80 im using cnc3018 just put a pen in the spindle and unplugged it
Same problm any solution?
just one word : amazingggggggggggggggggggg
great stuff man :)))) robots rock!!! 🤖🤖🤖😺😺😺
спасибо, теперь я могу с помощью Chat GPT написать курсовою, а с помощью принтера написать ее еще и от руки!
really good video, detailed and easy to follow, Thanks. Just had 1 question? Which TTS software are you using for the voice over? Thank you
"SOMETIMES YOU MUST HURT IN ORDER
TO KNOW, FALL IN ORDER TO GROW,
LOSE IN ORDER TO GAIN BECAUSE
LIFE'S GREATEST LESSONS ARE LEARNED
THROUGH PAIN.
it would be better if u add an exclude option if the headings of a topic are different colours and the topic is another coloured it would be good
Hello , what version of GRBL did you use , my servo motor does not work !!
wszystko działa jak należy ,najlepsza tutka.
kolego może masz pomysl dlaczego serwo drży podczas pracy silnika krokowego???
thank you so much this very good . and i want ask you about the next video am waiting the next video.keep going and goodluck :)
The next video will be uploaded within a week. (multi-color drawing)
@@shopmakerq4821 how can I make multi- colour drawing please make separate video ..
Why the arduino software is installed when it's not at all used??
I have set up my GCode Sender and it recognises the arduino uno but when I make a command nothing happens. Specifically, the motors don't do anything. Any thoughts on how to fix this?
flash firmware grbl to arduino
Did you first upload the GRBL to Arduino
can you tell me about the arduino software?
Thanks brother.
Under share there is no extensions now. What can we do for that?
Ótimo, ajudou muito amigo, obrigado.
Thx bro... complete information
Can it copy notes from pdf or photo and write on ruled book of any size?
Yes
have you tried to use it as a string art machine?
sir i am looking to add more fonts for km laser extension converting to hershey text is their a extensive vedio how to add diffrent svg fonts or stroke fonts i am enable to do it can u help me out thank you
Can I use this with a marker to draw on a fabric? Or clothes?
Sir im facing a problem, after all setup when I'm manually moving the machine by pressing x+ axis it's moves on diagonally means(x+y+) same to others sides plz reply sir😢🙏🏻
Same issue here
Did you find any solution pls tell
@@nishant1422 No, I Tried and I solve every problem except this. I'm Not Stopped Continuously I'm Trying To Solve. However if you have any other problems you can ask me, may I able to help you.
Hi șir,please help me with advice about Drawbot, after extracting the file the icons from the files do not appear and if I want to open one it asks me to choose a software to open it with and I don't know why
Amazing 👌👍🙏
m03 s80 command does move my tower pro servo to the end but M05 S10 just cutts energy off,it doesnt turn the servo back, I am using arduino nano
Hi ! which drive should i use a servo motor keeps freezing!!!
i there is no link for software.. just a zip file named "Drawbot_image_to_gcode_v2"
can u help me please??
HI, I had a small question, we are going to make this robot as a group of university students, I have to make the code for the micro controller, my question is that how can I convert the G-code, that is produced by INKSCAPE and transferred by G-Code sender to microcontroller, to orders for my stepper motors? Is there any resources that can help me to write the code ?
thanks a lot.
Nice video thank you
every thing is ok but where aurdino g-code software
I have made one Cnc 2d plotter but my drawing is getting overlap again and again please help
Will Inkscape connect directly to the drawbot.
sir can i used the universal gcode sender in vigotec vg-x4 thanks
Hello. What needs to be changed or replaced for the machine to draw at speed [X10] or at any other speed
I also want to know
Bro there is no code available on thingiverse
The video is very good but the speed is very high
Hello, the G-code processing is not working. When I try to click the button to load a file it says "Cannot find anything named ""frame""
have you got any solution
@@keeman04 just used a different software
sir can i use nema 17 4kg load machine instead of it please reply please because i made it and it can not work properly
when i click on x or y axis and remove it , motors keep moving in those directions and even try to move after reach end point.
help with this problem please
In "Drawbot_image_to_gcode" I have a problem, when I launch i see a warning --->> ("Cannot find anything named “frame”). Where can be an error?
Really nicely made thanks.
But have a problem with M5 S0, do you know where to remove s0 in the code? rather than having to do it manually
Do not remove M5S0 as it says spindle off /speed 0, In this case you are using the M3/M5 gcode to move the pen you are drawing with or if you are using a laser you are telling the laser to turn on or off,Now if you are not using a pen or a laser and want a standard 3 axis device using all stepper motors than go to settings by typing %% in the command line of ugs and find the line which says laser mode and change it from a 1 to a 0 . now you are in 3 axis mode.
You have to enter " (M03 S80,For pen up.)( M05 S10 for pen down)
Can we disconnect computer after sending gcode?
@@mrnerd73 noo
@@sasitharshanvv5672 it is taking 2 hrs to complete the drawing, is there any other way so that we can disconnect computer, like using arduino Uno micro controller?
my plotter work in opposite direction. i am proceed x+ he moved in y direction. kindly gave solutions
It is compatible with which kind of laptops
Can we use it with tab?
This is mashin works very loudly. How make it slowly? Help me please
This man machine you sec order book and not supply matral cheer man
Please make another video. Zoom it well. And make it slowly. I didnt understand.
where is the arduino code?
Hey, when Exporting to LaserGcode Exntension in Inkscape, it doesnt work. The gCode exporter window does not pop up in MACBOOK? pls help to resolve
Which grbl code are you using there is error while movement it come back and hit the box. O
My cnc pen plotter is going on the wrong side. When it draws the picture, it is not in this direction, but it is moving to the left side. how to fix it? Is it a software problem?
my machine is not showing in any port of the usgplatform pls help
Can we disconnect computer after sending gcode?
What happened if we installed the software in the mobile and try to connect with device
HI DUDE MY SERVO IS NOT WORKING WHILE PLOTTING, BUT WHEN I GIVE PEN UP, PEN DOWN CODE IT IS WORKING PERFECTLY ,PLS HELPME BRO.
Plz make an another video on image to sketch (about processing software) plz...
Hlo broo
App na kesa isko setup kiya ha
I built a plotter but when I send gcode to the machine it draws it at a 45 degree angle. Any ideas on the issue or troubleshooting would be appreciated.
remove 2 slash from config.h and reinstall .
i.e in 153 line to activate corexy.h
Can we disconnect computer after sending gcode?
@@gopubalu1542 #define COREXY // Default disabled. Uncomment to enable.
Sir, please upload software tutorial video in Bengali
These plugins are not working on my macbook :(
how is your machine writing straight mine is writing at an angle of 45 degree of paper
Thanks for your video, can you tell me that what firmware support for this?
firmware grbl
Maker q chetta what can I do when it's a notebook??
couldnt find the file save on my desktop directory---help
Sir my shading increase and decrease is not working
In my equipment, both 'Return to 0' and 'Reset 0' doesn't work. Any help?
bro i m also making this machine but my servo is not working with the cnc shield (servo is working fine with arduino )
I have the same problem did anyone know the reason?
sir not working g code drawing file,it shows error msg"not frame" ,can you help to me fixed that problem
I think the latest stable proccessing release this works with is 3.5.4
Hanzhen harmonic drive gear , gear reducer, robot gear , over 30 years experience
Awesome machine.
Bro can you provide the STL files for these plastic parts?
they're selling in they're website ..
(3d printed parts )
what is the program for arduino?
Can it do different languages
Hi dude this is nice job , i made the same one but i having a problem about moving when i press the "X" to move X axis it just moving 45 degree angle why is that happen
Same prblm... any solution??
Did any one got solution for this?
I have also same problem. What is the process for right work
how to change quadrant points?
How to use Arduino ide software in the project
Hello, Can you helped me why motor servo can’t work up and down when start running. But when I test commented M03 S80 and M05 S10 it worked up and down normally. I hope you have ideas for help me. Thank in advance 😊
Using eleksdraw?
If u solved share the solution
Is it solved
First wich file snd to Arduino
Hello, I can connect, but it appears as Off-line all the time, how can I fix it?
Why that particular version of Inkscape? Does earlier / later ones work?
I also facing this problem?
Inkscape is not opeaning
what is the name of the tool and where to buy?
thank you so much for the precious information !
😢😢😢😢How to use Arduino ide software in the project... Please tell
Как уменьшить звук моторов, работает медленно и очень громкою Помогите плиз
From India.
Sir when I get comfortable and then I connect then idle option is not coming
Sao máy của mình chạy được tầm 2-3 phút là phần mềm ugs bị treo luôn ko thao tác được máy thì dừng phải rút dây kết nối ra cắm lại rồi lại phải chạy lại từ đầu mong bạn chỉ mình cách sửa lỗi này với😢
Why an old Inkscape?
Please tel all required (complete kit ) to have a cnc writer copy with price
In the universal gcode platform software,the image i have inserted is showing 2000*3000(l*b)(mm).. so machine is making noise and being stuck.. the maximum length the axis can travel is 200mm..how to adjust the length..pls help
Did you buyed the machine
Go to firmware settings in universal g code center and chsnge the values but you need to buy and add limit switch in order to work
EXCELLENT JOB, THANK YOU SO MUCH, CAN YOU HELP ME TO UNDERSTAND AND FIX MY PLOTTER SETTING TO LIMIT THE X AND Y-AXIS TO THE SECURE END OF THE TOUR, I INSTALLED EVERYTHING AS YOU DESCRIBED BUT NOW MY MACHINE IS HITTING THE END OF THE AXIS AND START VIBRATING THERE, PLEASE HELP OUT.
What is the name of the company of this machine?
@@عليمحمد-ر8ز3ج Is exactly the same as in your video some friend send me as gift
once again thank you you are a master including so much useful information in one video al the community appreciates your talent and dedication. I could not find the color plotting tutorial.
Use limit switch so the algorithm can understand the limit of the Mechine
@@oscarrv50 did you fix the problem
Processing software is not working in my pc plz make something another vedio for that....! Plz