Chevy 63 Leaf Spring Swap
Вставка
- Опубліковано 25 сер 2024
- In this episode of the Toyota Pickup Build we swap out the old Toyota leaf springs for a fresh set of Chevy 63 inch leaf springs! They have so much more flex than the old Toyota ones and will give it a better/softer ride. We will be using the old rears in the front of the Toyota to help move the axle forward.
Thanks For Watching!!
↓↓↓ Get your Merch/Off-road Parts Here! ↓↓↓
jbmfg.net/
jbmfg.net/
jbmfg.net/
Follow me on Instagram and Facebook for more content!
Instagram- @justintbraun
Facebook- / overtimegarage
Link to the Toyota Pickup Build parts...↓↓↓
Tires-amzn.to/3I7UbcW
Wheels-amzn.to/3w3f1I8
Shock Mounts-ebay.us/iJXCt8
Transfer Case-ebay.us/KAFv2L
Steering Box-ebay.us/41HMLl
Hydro Assist-ebay.us/MxFwYo
U-bolt Flip Kit-amzn.to/3K7JCZ2
RCV Axle Set-ebay.us/yMQm44
Axle Truss-ebay.us/9L6Btm
Front Diff Armor-ebay.us/9uJARc
Knuckle Rebuild Kit-ebay.us/ZiV0ES
Front Wheel Bearing Kit-ebay.us/9Jv4hx
Front Shackle Kit-ebay.us/jRMltO
Front Shocks-amzn.to/3LRKv8O
Rear Shocks-amzn.to/3LUywHC
Links to 3rd Gen Tacoma parts...↓↓↓
Front Coilovers-ebay.us/47S1kz
Rear Shocks-ebay.us/U1xHsT
Tires-amzn.to/3BG0dPq
Wheels-amzn.to/3auW2Ks
Winch-amzn.to/3D5Hm0E
Light Bar-amzn.to/3iNEWw7
Bed Mat-amzn.to/3FJh5aI
Floor Mats-amzn.to/3AE6D0i
Seat Risers-amzn.to/3DBOyBV
Ram Mount 1-amzn.to/3EF7uB3
Ram Mount 2-amzn.to/3CGBGtV
Tablet Mount-amzn.to/3lMatza
Upper Control Arms-amzn.to/2Xw3PEC
Link to my Amazon store...↓↓↓
www.amazon.com...
Links to the 1st Gen Tacoma parts...↓↓↓
Air Compressors-amzn.to/31ZGFoh
Wheels-amzn.to/2uWjWxi
Winch-amzn.to/2sIUGt9
Supercharger-amzn.to/38q0V5b
Tires-amzn.to/36rIPOx
Front Locker-amzn.to/2Ea40IG
Front Coilovers-amzn.to/33EsnbG
Rear Shocks-amzn.to/2YbEHPJ
Front Upper Control Arms-amzn.to/2OHJ1Dn
Lower Control Arm Bushings-amzn.to/2OEu596
Inner Tie Rod-amzn.to/2OYOCUC
Front Floor Mats-amzn.to/2E4Cr3F
Rear Floor Mats-amzn.to/38nNN0B
Window Shades-amzn.to/38sthvJ
Light Bar-amzn.to/2P9KF0G
Air Chucks-amzn.to/2x6ODkj
DISCLAIMER:
Due to factors out of the control of Justin Braun, we cannot guarantee against improper use or unauthorized modifications of this information. Justin Braun assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Justin Braun recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Justin Braun. This video and description contains affiliate links. I may receive a small commission for purchases made through these links.
#toyotapickup #1stgentoyotapickup #toyotapickupbuild
Seems pretty straightforward, Nice job. Awesome Pickup!
Thanks!
Damn looking good, come a long way keep up the good work!!!
Thanks man! 🤘🤘
Quick and clean. Good work
Thanks! 🤘
Love your toyo looking bad ass im john wayne fron south texas and love 4x4s. Got a 93 isuzu 327 motor and sitting on 42. Nothing fancy bot gets the job done .
Thanks man! Sounds like a good ripper 🤘🤘
Looks good!
Thanks! 🤘
So reading the instructions it says to stack 6 inches of boards. And check with the full weight on the axle. When u french it in the frame would it make you need to adjust that for checking center pin in the axle
Very nice
Thanks!
For the front hangars do you just make the center of them even with the center of the frame? What if you are slight out from one side to the other , will the tires get uneven wear? Great video!!
They definitely need to be even. I pull measurements from all over to make sure they are even. Including from the front axle. Thanks!
#flex
All the flex 🤣
What leaf’s do you use for the front? I’ve heard some newer Tacoma rear leafs will work for 80s pickup front. 🤷🏻♂️
What shackle angle did you use?
Can you leave on the overload spring?
Will this work on a 2003 Tacoma?
Hi what shock are you used ?
What kind of wheels / tires and size are they
Are you doing rears up front as well?
Yes. So I can get the axle moved forward more
How do you get so much lift with junkyard Chevy 63s? I only got 2 inch lift on mine
It didn't lift it anymore than what it was before. You can always add leafs or put longer shackles on it if you want to go higher
Have you heard of anyone using a pro comp lift spring #13211? It’s designed for a 3/3.5 inch lift on a Chevy pickup
Do you still like the 63’s? I’m about to do my rear and can’t decide between all pro 4” or chevy’s since I already have the chevy’s
100% yes. The Chevy 63s are amazing. Well worth doing the swap
@@JustinTBraun thanks buddy!
👍
🤔🤔🤔
🤷♂️