Land Rover Freelander 2 / LR2 Suspension Lift Part 1 - Introduction & cleaning
Вставка
- Опубліковано 5 лют 2025
- In this video we unbox our new suspension lift spacers for our project Land Rover Freelander 2.
We have a look at the car and its so muddy we decide to pressure wash the car before starting..
Spacers were purchased from www.beavispits...
Finally, this is the video I have been waiting for. Don't hold back n with the details lads. Thanks in advance for making this series of videos, much appreciated 👍🏼👍🏼👍🏼👍🏼👍🏼
Yes sorry its taken a while... I am aware there are a lot of Freelander 2 people out there who want more videos and cool stuff !
Got the popcorn ready for the next instalment , Simon. Can't wait.
I've got a 40/50mm lift on my Freelander 2, Evoque 18 rims with 265/60/18 Yokohama Geolandar go15 AT tyres. Raised air intake and bonnet vents too. It's a 3.2 I6 with an HST bodykit fitted but that negates the lift kit.But I have a modified 2012-14 bumper waiting for paint before that's fitted, giving it a better approach angle. All I want is some wider wheel arches.......................
Hi Ian... was thinking of you as i looked at my missing sound mat under the bonnet !
@@L663 Blimey, I forgot I'd fitted it ! Again, many thanks, Simon. It was really needed. 👍
This is excellent timing gents. I've just bought the exact same kit off Scott for mine.
Would love to see a powerfuluk freelander 2 snorkel kit!
Just been looking at this - there is nothing very pretty out there.
I'd second that request. Have you seen the ones that Brazillian company make?
@@OneLifeOverland I have considered the one from Brazil, but buying it is tricky and I think its made of fiberglass, good design though. I'd like to see one made from XLPE or polyurethane
@@JoeVis ah I didn't realise it was fibreglass. There are a few uk Freelanders sporting one that I know of. At present they are no longer exporting to uk due to covid restrictions apparently. Scott Beavis was looking into one at one point though I think.
Brilliant video....please do a F2 dodgy fuel gauge/sender sort out...cheers.
Simon...you really need an underbody Lance which makes cleaning the underside so much easier. It is an angled tube that is free to twist in its holder which means you can aim a wide spray underneath easily even if you are standing up...it really works and I use mine for Winter weather and especially road salt. Now I’m looking forward to your plans only it has passed through my mind to do much the same..a sound but slightly neglected HSE with rubbish wheels that will mean enjoyment without fear of scrapes and scratches. So...give me inspiration!! 😃😃😃😃Richard
Hi Richard - thanks for the advice - underbody lance and some new jets ordered !
How does the lift kit affect on road handling? Keen to lift mine but to be honest it spends most of it life on the road, only occasionally off road. Thanks
Simon for your next video could you add some LED fog lamps that come in the high end defender to your defender…..
Where did u get the lift spacers from ??
Another great vid. Really grateful to Ukpowerful for these helpful videos, thanks Mr Beavis also. Both channels have saved me hundreds in garage fees although my wife wouldnt agree with the amount I've spent making my 2009 landy look awesome 😎. Any advice on where I can purchase the black side bars....really struggling to find them, can't buy second hand as there's never any mounting brackets included....help 😀
They seem to be discontinued at LAnd Rover but you can but the fitting kits for £30+vat - see attached
www.dropbox.com/s/obtba0twub9xsqf/side%20bar%20mounting%20kit.JPG?dl=0
@@L663 thanks guys, appreciate the help
Air intake on my Freelander 2 stopped under the front headlight. Didn’t go to the vents, I found this out the hard way when I took it through a Ford.... sucked in all the water, luckily the air boxes have holes in the bottom to drain water before getting sucked into engine.
Seems like LR changed this in some models of the car as my air intake goes all the way to the side vent
This does not sound correct - the parts list is showing only one configuration and that goes all the way up to the air intake in the wing / fender
www.dropbox.com/s/r6za9lagk8r0wt0/Freelander%202%20air%20intake.JPG?dl=0
@@L663 love your work! Thank you
Is there any adjustment for the rear wheels on these landrovers.. If i follow my freelander 2 i can see the rear wheels are not straight. The bottom of the wheel sticks out further than the top..
This is called CAMBER - not sure on how to adjust but there is some information here
www.freel2.com/forum/topic9761.html
What (mm) spacers do i need to get a 40mm lift in the front and rear and for the vehicle to sit level
Did you experience any issues with the 40/50mm lift because usually they only lift the front by 20mm? Can I get some information on this, please?
See our other videos with off road driving
I love those ramps! Where can you get them from please?
Google "carstages ramps"
@@L663 thanks buddy, they look like a great alternative to a hydraulic lift 👍
hi, is it possible to know the brand of the spacers? they are cool :D
www.beavispits.com/
Looking forward to the next. I've different figures than you, maybe yours is lighter as parts are missing.
Could be and also wheel / tyre sizes could make a difference
@@L663 I got 830 front and 845 back. I've 17" tyres. Cant wait for the second one. Can you let the people know how long it took you to put the spacers on. Roughly is good. I have to ask a garage to do everything, then I know what I'm going to pay. Also when will you be sending to the eu as it doesn't go to order still.
It’s a pity you don’t have someone called Lance to do the power washing… I’ll get my coat.
Yes Lance Armstrong would be a good person to have around !
@@L663 he could go for your lunch really fast on foot or by bike #donttakedrugs
Where did u get kit from ????
www.fl2lift.com/all-products
Will they be man enough for the job being 3D printed? Time will tell.
Just to clarify, the spacers are not 3D printed. They are solid cast polyurethane.
🙋♂️🙋♂️👌🙏🙏