Hello Ndouna Ben thank you so much for your educative tutorials. I've a challenge with my liquid soap/ liquid detergent, the foam isn't satisfying and I add CDE to it but still it's not it even disappears quickly when using the soap. Here is my formula kindly advise me on how to rectify it thank you so much. TO MAKE 100L I USE: Sles = 5kg Salt =6kg CDE= 500ml CMC =250g Sulphonic acid =1kg Caustic soda= 6tablespoons Color qs Perfume qs Formalin
Thanks Soo much Mr Ben for the knowledge you have shared to us now in time of the absence of Sle and CDE is it recommended to use foam booster and if it is recommended how is the ratio
Mr Ben. Thank you for these formula and teaching , however I have tried this dishwashing liquid formula and my dishwashing liquid end result was very milky. What did I do wrong. Thank you
Thank you sir i have been following your channel and i found it very informative. Do you perhaps have a simple formulation for showergel? Or you can make a video. Thank you.
Thank you sir for your videos. They're very informative but can you please help with the scientific names of your ingredients and their functionality. Thank you.
Most formulation are given out with 25% sles. You can use 70% sles, which means that you'll need to add the amount of salt, not excessive salt, but enough salt that will be adequate for your amount of 70% sles. The ratio is about 188 grams of salt for 1kg of 70% sles. Regards.
@@ndounaben Thank you, Sir. I made a 45gal with the first formula. The product was high quality but cost too much per gallon. This formula looks like it might be a cheaper manufacturing cost.
Hi Ben, thank you so much, your videos are very helpful, do I add a bit of water when dissolving that 1kg sles with 188g salt ? And is the quantity of water ?
Learn how to manufacture Dishwashing Liquid and subscribe to the channel.
Hi Sir? Is Acid slurry the same with that thick sulphonic acid?
Also can I substitute Acid slurry with that Sulphonic acid?
Thank you sir,what is acid slurry
Hello Ndouna Ben thank you so much for your educative tutorials.
I've a challenge with my liquid soap/ liquid detergent, the foam isn't satisfying and I add CDE to it but still it's not it even disappears quickly when using the soap.
Here is my formula kindly advise me on how to rectify it thank you so much.
TO MAKE 100L I USE:
Sles = 5kg
Salt =6kg
CDE= 500ml
CMC =250g
Sulphonic acid =1kg
Caustic soda= 6tablespoons
Color qs
Perfume qs
Formalin
Hi Ndouna Ben. Thank you very much for your help. Is it possible that can provide us with details of your chemical supplies in South Africa?
Our email : ndounaben@gmail.com
Thanks Soo much Mr Ben for the knowledge you have shared to us now in time of the absence of Sle and CDE is it recommended to use foam booster and if it is recommended how is the ratio
Hai Ben..how do I convert acid slurry into a liquid? I have it in powder form. Thanks
Is soda Ash same çostic soda n salt kitchen??
Can you help with soap based lubricant formula used in beverage (bottling conveyors)
Can you use sulphonic acid in place of sles
Is acid slurry same as sulphonic acid?
Mr Ben. Thank you for these formula and teaching , however I have tried this dishwashing liquid formula and my dishwashing liquid end result was very milky. What did I do wrong. Thank you
Thank you sir i have been following your channel and i found it very informative. Do you perhaps have a simple formulation for showergel? Or you can make a video. Thank you.
Thank you sir for your videos. They're very informative but can you please help with the scientific names of your ingredients and their functionality.
Thank you.
My dish washing soap is not foaming to the required standard. What ingredient must I add. ?
Do you have any formulation for dishwashing liquid using potassium hydroxide instead of sodium hydroxide ?
The sles you used in this video is 25% or 70%?
Here sles is like jam thick how to do for 1lt
Hi sir.what is the Dye
Great. Thank you
you're the most welcome !
how do i avoid too much bubbles when mixing the dishwashing liquid?
they'll settle within about 24 hours, then you can do the packaging. Regards.
I can't find the formulation one ingredients in the description box
What is acid slurry. is it the same as sulphonic acid.
yes
great.. useful
You're welcome!
no need of preservatives?
Please can you teach us how to use PH sorry brother
Thank you Sir, Can I use SLES70%
Most formulation are given out with 25% sles. You can use 70% sles, which means that you'll need to add the amount of salt, not excessive salt, but enough salt that will be adequate for your amount of 70% sles. The ratio is about 188 grams of salt for 1kg of 70% sles. Regards.
@@ndounaben Thank you, Sir. I made a 45gal with the first formula. The product was high quality but cost too much per gallon. This formula looks like it might be a cheaper manufacturing cost.
You're the most welcome, that's the purpose of this channel, exactly this one has a cheaper cost. Regards.
Hi Ben, thank you so much, your videos are very helpful, do I add a bit of water when dissolving that 1kg sles with 188g salt ? And is the quantity of water ?
Whats the shelf life?
about 3 years from the time of Manufacturing. Regards.
thanks..
Hi Ndouna, is it possible for you to help with raw chemical suppliers?
Our email : ndounaben@gmail.com
What about preservatives?
you can add formalin, and consider about 1% of the amount of water, but Acid slurry on its own is a preservative as well. Regards.
Acid slurry on its own is a preservative. Regards.
@@ndounaben Acid slurry is SDBS or surphonic acid?
Sorry, Sir I didn't follow what should bring Ph.
Nice farmulation
you're the most welcome.