Hello and thank you for educating us so i want to know if 9l of water used while mixing 1kg of caustic ? Or taking small quantity and other mixing into other solution? Thanks
Thanks for your informative video. May I know the ratio for soap making when you are using more than one oil. And the formula that can make 20 kg of soap
Sodium silicate will harden the soap, you can consider about 1% of the total mass of the soap. Means 10 ml of sodium silicate for every 1 Kg of your Bar Soap. Regards.
He'llo brother from SA I like your videos it's educative about soap making please I use to produce 5kg of bar soap I know want to increase it to 7kg my calculations are as follows 1 litres of palm kernel oil 2.5 litres of bleached palm oil 2litres of water and 75 grms of sodium silicate 10 ml of EDTA should I increase the oils or which additives should I use thanks.
It looks like too much water for me too. However and as my brother explained, I think it makes some sense with some oils especially palm oil even though I find three liters of water too much for 333g of lye. I will try it for experiment but I think 1lts or 1.5 would be the ideal. I did palm oil soap following the water : lye ratio on the calculator and it came out dried instantly before finishing mixing and not all the oil got the water and lye. I have been making soaps for years but I am still leaning and making mistakes as each oil reacts differently which also affects the outcome of the soaps (soft, too soft, hard, breaking hard etc).
you can also consider this Ratio, it works very well: *Water = 5 Litres; *Caustic Soda Flakes = 1 Kg; *Palm Kernel Oil = 5 Litres. Do them on Cold Process and make sure the trace is reached. Regards.
Please I want to know if I use 9 liters of water to dissolve 1 kg of caustic soda, can I still use the whole of the lye solution in the Same 3 liters of oil. If yes won't the water be too much. Thanks and God bless your good work.
Sorry to get involved. A hot process can be used as soon as you are done because you cooked it and killed the chemical in the caustic soda whereas the cold process must be left to cure for at least 4/8 weeks before used. Both methods are good and safe if done properly. I saw a video that said the cold process can be used after three days since the saponification occurs and is complete in three days. However, this is for personal use (I do use them after three days and it's fine) but if you are selling the soaps, let it cure for two to three months if you live in a hot country. Hope this helps
Just what i have been looking for. I was really struggling with the ratios of the ingredients. Next is what oil is a good oil for soap making, since theres quite a lot thats being mentioned and it confuses me.
I understand this very well but sir I still need your opinion I want to produce 5 liters of bleached palm oil and 2 litters of vegetable oil but the saponification value is still confusing
Hello my beloved Brother , Thank you for for the great job doing to make us proud and be self reliance. Sir, I view your video about the ratio of caustic soda and water ratio yesterday but did not get clear. I will be very grateful if you can kindly give me recipe for making good bar soap and that of detergent powder. I shall be very glad and grateful for your support. Best Regards, Allale Olaniyi.
Sir. i saw in youtube about soap recipes. they said water ratio is 36% of oil. but you said water is x3 of oil really i confused. please explain about this sir. thank you
Case 1 : 1 liter OIL / 333.33 grams Caustic Soda / 3 liter H2O..
I got it! Thank you.❤❤❤
Learn about the ratio of oil, caustic soda and water while manufacturing soap.
Your process is helpful to me, since they are step by step
Really simple and clear
you're welcome
You just made it easy for me. Thank You!!
you're welcome.
Thanks alot, i’m going to try right now
Hello and thank you for educating us so i want to know if 9l of water used while mixing 1kg of caustic ? Or taking small quantity and other mixing into other solution? Thanks
Thank you sir, you are a great teacher
you're welcome.
You explained it very well.
Hopefully tomorrow I'll try this experiment 👍
Thanks for your informative video.
May I know the ratio for soap making when you are using more than one oil. And the formula that can make 20 kg of soap
Thank you so much, for you've clarified me, I produced soap had miss calculation
Perfect and very simple.
you're welcome
Thanks so much for education, I am thinking of entering in to soap making in near future.
Kindly tell us the amount of kaolin powder and sodium silicate in bar soap
Sodium silicate will harden the soap, you can consider about 1% of the total mass of the soap. Means 10 ml of sodium silicate for every 1 Kg of your Bar Soap. Regards.
Thank you so much my dear brother
you're welcome
He'llo brother from SA I like your videos it's educative about soap making please I use to produce 5kg of bar soap I know want to increase it to 7kg my calculations are as follows 1 litres of palm kernel oil 2.5 litres of bleached palm oil 2litres of water and 75 grms of sodium silicate 10 ml of EDTA should I increase the oils or which additives should I use thanks.
Thank you ❤
you're welcome.
Wow amazing explanation
you're welcome.
I am requesting for a full practical guide of making commercial soap
we have a manufacturing guide, you can place your order on our WhatsApp: +27739610562. Regards.
Thanks you nice explain well
you're welcome.
I jsut subscribed, this is very helpful ❤
you're welcome.
It looks like too much water for me too.
However and as my brother explained, I think it makes some sense with some oils especially palm oil even though I find three liters of water too much for 333g of lye. I will try it for experiment but I think 1lts or 1.5 would be the ideal.
I did palm oil soap following the water : lye ratio on the calculator and it came out dried instantly before finishing mixing and not all the oil got the water and lye.
I have been making soaps for years but I am still leaning and making mistakes as each oil reacts differently which also affects the outcome of the soaps (soft, too soft, hard, breaking hard etc).
you can also consider this Ratio, it works very well:
*Water = 5 Litres;
*Caustic Soda Flakes = 1 Kg;
*Palm Kernel Oil = 5 Litres.
Do them on Cold Process and make sure the trace is reached. Regards.
Did that ratio 1:1/3:3 and it was a mess i think the water is too much. Anybody having same problem like me?
Just my thoughts, I think it's the reverse
Thx
Amazing, can we use the same formula for olive oil?
can you teach detergent cake making
Thank you so much Sir, Can i use this formular for making Bar soap ? Thanks again
It's exactly for Bar soap. Regards.
Thanks
you're welcome
Brother thanks a lottttttttttttt Vvvvvvv USEFUL INFORMATION
What ratio for one1000gram bar soap
Wow you teach good sir
you're welcome...
Good job. where are u located?
Please I want to know if I use 9 liters of water to dissolve 1 kg of caustic soda, can I still use the whole of the lye solution in the Same 3 liters of oil. If yes won't the water be too much. Thanks and God bless your good work.
the water is too much atleast 5to6 liters of water to dissolve one kg of caustic soda
@@happysoaparuawestnile4236 I thought you can use 3lits to 1kg of caustic soda
@@happysoaparuawestnile4236God bless you dear 🙏🙏🙏
I have been looking for this for 2 months now 😢😢
The water is too much! It's absolute absurdity.
Please tell the ratio of beaf tallow and caustic soda
Thank you. what about the salt amount in liquid soap making ?
How do you use caustic purification to purify crude soya bean oil, what's the ratio say in a 200l container filled with crude?
hello Mr Ben I have been trying to come up with a clear Ure
tire Polish u I'm failing something where please assist
Thank you so much, subscribed. Very informative.
You're the most welcome!
thank you so much for this vedio
You're the most welcome!
please tell me the ratio of 200kg animal( caw, bull) oil
thanks so much.please is hot process better than cold process
Sorry to get involved.
A hot process can be used as soon as you are done because you cooked it and killed the chemical in the caustic soda whereas the cold process must be left to cure for at least 4/8 weeks before used. Both methods are good and safe if done properly.
I saw a video that said the cold process can be used after three days since the saponification occurs and is complete in three days. However, this is for personal use (I do use them after three days and it's fine) but if you are selling the soaps, let it cure for two to three months if you live in a hot country.
Hope this helps
Hey
Is this formula for toilet or laundry soap?
Hie guys, how many bars of 200g soap can 25L of glycerine and 25kg caustic soda flakes make?
What about the fillers to add, how do you calculate them?
Thanks
I have subscribed
Dear can u make a hair and body cream recipe ?
Hi sir namasthe can u please tell me the ratio of bathing soap for daily use Cold press method, for new commers for bathing soap manufacturing unit
Good day sir, i just want to ask about this soap measurement if is this for bath soap? Thanks sir and god bless..
It's the domestic bar soap. Regards.
Sir please make a class for bath soap on noodles base.
brilliant
Just what i have been looking for.
I was really struggling with the ratios of the ingredients.
Next is what oil is a good oil for soap making, since theres quite a lot thats being mentioned and it confuses me.
thank s of lod bangladesh
for which type of oil this works?
How can I get supply of coastic soda right away. I need like 20 bags.
Contact me for caustic soda flxes
sir how many tablespoons in 1/4kg please. Thanks
thank sir this ratio is also applicable to palm kernel oil
Is this for liquid soap or hard soap
oil is not used for liquid soap
Thanks sir
You're the most welcome!
Good sir
I want the formula for using fatty acid, tallow, Caustic soda etc
What about soda ash
Sir, which soap formula is this? Barsoap or toilet soap sir
Thank you brother but the formula hasn't worked for me
Good day how do l get the new book
You can purchase the book here : payhip.com/b/LZorW
I want dispersing agent farmulation plz
What about 25 l of caustic soda
Nice but your voice very no low I don't understand well
I understand this very well but sir I still need your opinion I want to produce 5 liters of bleached palm oil and 2 litters of vegetable oil but the saponification value is still confusing
Please if you are using 5litres of oil how many gram of caustic soda and caustic silicate can you add
5 litres /3
Hello my beloved Brother ,
Thank you for for the great job doing to make us proud and be self reliance.
Sir, I view your video about the ratio of caustic soda and water ratio yesterday but did not get clear.
I will be very grateful if you can kindly give me recipe for making good bar soap and that of detergent powder.
I shall be very glad and grateful for your support.
Best Regards,
Allale Olaniyi.
Do you do online class? I need your contact
We do. Our whatsaap line : +27739610562
For any inquiries, here is our whatsaap line : +27739610562. Regards.
@@ndounaben thank you
The water was too much I prepared the soup and it was a mess
Thicking sluri making formula sir
Can u post an email address
Sir. i saw in youtube about soap recipes. they said water ratio is 36% of oil. but you said water is x3 of oil really i confused. please explain about this sir.
thank you
Thanks
you're welcome
Is this for liquid soap or hard soap