@@mrt8694 Neither will an angle grinder.🤣 My set of bolt cutters are only 8 inches long and fit in my jacket pocket. It cost around $100, but I've cut so many padlocks with it, it's paid for itself many times over.
Can you show how to open the round locks? I didn't go through your whole play list to see if it was there... if it's in your list, can you tell me the name and date of it, otherwise.... They have a short, area that the thick bar(don't know what it's actually called) that it slides into the lock that doesn't seem like it could be cut with bolt cutters.? I'd just like to know how safe my storage container is. 😂 Thanks 😊 I subbed because you're Awesome! 💯😁
I have bolt-cutters which fit in a pocket, as it's only 8 inches long. I bought it primarily to cut padlocks. It cost me $90 but it's already paid for itself.
None of these actually work. The closest thing to actually workable is the jar lid shim. The problem with it is that jar lids are made of metal that is too thick to fit between the shackle and the hole it slides into. The metal that makes up the side of an aluminum soda can, however, is perfect. Any padlock that you don't have to have the key turned to lock is vulnerable. Some locks have latches that are squared off, not tapered, to prevent this vulnerability. Some locks also have a latch on both sides, requiring you to shim both sides. Funny thing is, if you look at the shackle on the lock used to demonstrate this technique, it was one of these locks with two latches requiring two shims and he's only using one.
On the second example the shim doesn't even penetrate the lock to release the bolt. Besides it would take two in order to work for that particular lock
@@jeremywalker666 There are way too many clickbait videos around unfortunately...I should make one already...how to loosen a wheel bolt with a piece of 2x4
Jò jó ,de nem èletszerü..minden módszerhez kell egy satu....ès ha a lakattal be van zàrva valami ès az lóg nem tudod befogni a satuba foszfort beleszorni,stb.
Попробуйте наш український замок открыть тогда я поверю!!!! А так китайские замки я с 1го удара молотка сбиваю и не мудрую что либо!!!!! хоть на коментах заработаеш😋
Why bother with all the 'tricks' when such a crappy lock can be picked in second? A half decent lock can't be shimmed or opened with the gunpowder stunt anyway.
I lost my lock keys and just watched your video, used one of your methods and it worked.thank you so much
Good afternoon! Very good👏👏👏greetings from Brazil🇧🇷🇧🇷🇧🇷
this is a great idea unless your lock is attached to something.
Second and fourth - same method. 😕
can you tell me what camera you are using?
Love it 👍❤️🏆
Take the angle grinder (cordless) open any lock 10 seconds
Why waste 10 seconds when bolt-cutters can do it in one? They're quicker and much more quiet.
@@PhantomFilmAustralia fair point but the bolt cutters won’t fit in my pocket 😀
@@mrt8694 Neither will an angle grinder.🤣
My set of bolt cutters are only 8 inches long and fit in my jacket pocket. It cost around $100, but I've cut so many padlocks with it, it's paid for itself many times over.
@@PhantomFilmAustralia same size as my angle grinder then ,my bolt croppers are about three foot long 😂
@@PhantomFilmAustralia an 8 inch bolt cutter is for wires. What are you talking about? Just bolt cutters above 36 inch can cut a lock
Pero ponlo en una puerta con cadena que no es lo mismo
Can you show how to open the round locks? I didn't go through your whole play list to see if it was there... if it's in your list, can you tell me the name and date of it, otherwise....
They have a short, area that the thick bar(don't know what it's actually called) that it slides into the lock that doesn't seem like it could be cut with bolt cutters.?
I'd just like to know how safe my storage container is. 😂
Thanks 😊
I subbed because you're Awesome! 💯😁
Hence, Proved professional Thief 🙂
What if the lock is on something and you want to get it off? And/or you want to keep it after opening it in the ways you demonstrate?
Use a key or consult the lockpicking lawyer
Also the shim method is non destructive. But rely on the lock not being protected against shimming
Useful for thief;ha,ha,ha!
He showed at least TWO ways to avoid damage.
a video editing magician, in reality, you can't open it in such ways
Yes u can.I did two ways and it worked.
钥匙都丢了，还要这个锁干嘛呢？如果单一个锁，扔了算了，反正也没钥匙。如果锁在门或箱子上打不开，那也没法这么折腾啊？
Muy bueno 👌 muy bien tu truco 👍 saludos cordiales desde MZA ARG ✌️ 🇦🇷 👍
3:24 Oder man nimmt einfach den Winkelschleifer zum öffnen
That's about $40 in lumber for those matches
Dzięki😁
Wish I seen this a couple of days ago instead of buying bolt-cutters to cut off a lock where I didn't have the key
I have bolt-cutters which fit in a pocket, as it's only 8 inches long. I bought it primarily to cut padlocks. It cost me $90 but it's already paid for itself.
None of these actually work. The closest thing to actually workable is the jar lid shim. The problem with it is that jar lids are made of metal that is too thick to fit between the shackle and the hole it slides into. The metal that makes up the side of an aluminum soda can, however, is perfect. Any padlock that you don't have to have the key turned to lock is vulnerable. Some locks have latches that are squared off, not tapered, to prevent this vulnerability. Some locks also have a latch on both sides, requiring you to shim both sides. Funny thing is, if you look at the shackle on the lock used to demonstrate this technique, it was one of these locks with two latches requiring two shims and he's only using one.
@@kender1412 right? none of the methods, as shown, will work. The lock picking lawyer this guy is not!
@@25EllisDee25Who is the lock picking lawyer ?
오래전에 다른 영상에서 한번 보긴 했는데
또 봐도 신기
On the second example the shim doesn't even penetrate the lock to release the bolt. Besides it would take two in order to work for that particular lock
Same on the 4th
@@stimfalc have you seen a more generic skit?
@@jeremywalker666 There are way too many clickbait videos around unfortunately...I should make one already...how to loosen a wheel bolt with a piece of 2x4
Wow ,amazing
What about a combination or tube lock?
Los métodos están buenos, pero ninguno serviría en una situación normal.
Isto efektno je kad umjesto šibice usitnite ping pong celuloidnu lopticu i zapalite na idti način
Where is the one that shows using the battery
Jò jó ,de nem èletszerü..minden módszerhez kell egy satu....ès ha a lakattal be van zàrva valami ès az lóg nem tudod befogni a satuba foszfort beleszorni,stb.
Every thief will learn from your skill, hahaha🤣🤣🤣
ขอยคุณ ครับ👍
Amazing
The pin motion didn't work for me 😢
Good idea for thieves
The jar lid shim is the closest thing to anything that might work, but jar lids are too thick for most locks. A soda can works great, though.
If you have a grinder be easier to just grind the lock than fabricate stuff
My exact sentiments... lol
Глупости все это, а если замок на сарае и в снегу или под дождем?
The thieves thank you a lot
Bravo ! C'est génial !!!
A0.
Ta tiktok
👍
👍good
Why dont you use the flex to open the lock 🙈
That’s why I keep 5 pounds of match heads with me where ever I go
Im sure you love how it smell
😂
جب٥ظتظ😊@@mattwillis8769
جب٥ظتظ@@mattwillis8769
#1 and my personal favorite is at 0:05
4 cách mở ổ khóa của bạn rất hay
번호키 여는 방법은요?
Другой раз попробуй открыть также настоящий замок например амбарный
4:54
I'll just go to a locksmith and have him make a new key.
おもろい😁
Ну открыл,а сколько портов?
Useful for thieves?
How to get into your neighbors house is a more accurate title
Já era o cadiado kk o preço q...ta
Ga berlaku untuk gembok kunci kotak
You have an angle grinder and a blow torch, but you don’t have a lock pick 💀
قدیمی شده🔓🔒
Hi, wow
Now I have to play. 😁
電気カッターで鍵切れや！
ایبل
Акопян видеомонтажа 😂👍
Мастер монтажа ахаха
Это давно известно, за счёт серного газа создаёт давление на шарики.
Pressure on the balls is very hard to withstand
Or just use the angle grinder on the actually padlock
この動画を見た人が、他人の家に忍び込む際に悪用すると犯罪者になってしまいます。治安が悪くなる昨今、あまり関心できませんでした。
En una situación real no me sirve...
хонор проверял замок спичками: не работат
Монтаж? Нет, спасибо...
mais fácil alavanca e um martelo e poooolllllll kkkkkkkkkk
Open top security
Tim scraps??? It may work depending also where's the padlock on the lock..is not that easy..dude
Lass das mal den Schimanski machen.
未使用の南京錠がロックしてしまってもうどうでもイイじゃん
扉やその他の所に使用中で鍵がなくちゃっちゃった時の方法じゃなければただの自己満足じゃねえの？
Red phosphorus
Способ со спичками - полная хрень, не работает, я пробовал
what's small hole saying on there! 😉
CALL A LOCKSMITH ! ! !
These tricks really work
えーーーー😱
こんなにちょろいの？南京錠って。
Moi, je fais plus simple... En français on dit un coup boulons lol Lui, ça solution ça dure deux jours 😂
Wkwk
Попробуйте наш український замок открыть тогда я поверю!!!! А так китайские замки я с 1го удара молотка сбиваю и не мудрую что либо!!!!! хоть на коментах заработаеш😋
Al mio armadietto dello spogliato al lucchetto li ho dato na botta di flex ed ho fatto prima
⁇⁇⁇
Why bother with all the 'tricks' when such a crappy lock can be picked in second? A half decent lock can't be shimmed or opened with the gunpowder stunt anyway.
не верьте мужику, энто лохотронщик!
電池は❓(ФωФ)❓
фуфло китайское,попробуй челябинский замок открыть
هیچ راه نداره همش دروغ هست😁😁😁😁😁
That's a meth ingredient
Ma dai si vede il taglio nel video che schifo
Safe Fake
👌👍🫡😉
Most padlocks face down
Clearly trying to get a job in Hollywood!
Cheap Chinese locks
Scam
That drama is annoying as hell!
FAKE 👎
👎👎👎👎👎👎👎
กุญแจไม่มียี่ห้อ😂😂😂
БРЕД ПОЛНЫЙ
めんどくせえ