Nintoaster Instructional Video
Вставка
- Опубліковано 23 тра 2010
- ***There have been MANY requests for the music. You can now get it from either of the two links below:
www.stupidfingers.com/project...
• Nintoaster Instruction...
I filmed the entire process of building my last Nintoaster ("Nintoaster II") and turned it into some kind of instructional video of sorts. It's 85% informative, 10% bullshit and 5% other.
DISCLAIMER: EMBARK ON THIS PROJECT AT YOUR OWN RISK! I WILL NOT be held responsible if you burn all your hair off or amputate anything.
PS: Yes, this Nintoaster is now property of the AVGN. - Ігри
"You will only need a few cheap parts from your local Radio Shack"
Man I miss Radio Shack :/
haha. i dont. that place was a shithole - tayda dot com or ebay , if its worth it , you can wait
Why? Radio shack fucking sucked. Nxtech was the primary thing they pushed with shitty 50-60$ headphones that were worth like $3. They were shit.
Lucas Greene Radio Shack was awesome until approximately the early 2000s. THEN they started sucking
I really never went there. Anyway all those parts can be bought on amazon or aliexpress.
I would have said Fry's was a good stand in but Fry's is gone too. 😭
I remember seeing this video wayyyy back in 2010 (Jesus Christ I feel old thinking about that being a decade ago). I loved it so much that I tried it for myself (I was about 9 or 10 years old at that time, so not really the best with tools). After about 2 or so years of work (had to work after school and when my dad was home), I finally completed it! Given, it only works occasionally, but I was so proud of myself for completing a feat such as this, I wanted to do more!
I can say with full confidence that this video single-handedly made me want to become an Engineer. Now, almost a decade after my first time watching this, I'm now attending the #1 Aerospace Engineering University in the US, and I really have @vomitsaw and this video to thank for that. Without this masterpiece, I might have chosen a different path. Thank you @vomitsaw; even though we have never met, you have played a very large role in my life. Your work inspires me to continually do better, and not electrocute the cat with a soldering iron left plugged in, or sneeze a glob of solder onto a PCB. Thank you. You are my inspiration.
By proxy, thanks to the Avgn for showing it in the first place
Congrats on your path and keep it up
@@arkan5000 Thank you very much! I actually saw this video first, believe it or not. I came across AVGN around 2010 or so, and have fond memories of staying up until 3 am watching his reviews; man those were the days.
Anyways, thank you very much! I hope you have a great day!!
I felt the need to see it again also. It's still hilarious.
So this is where The AVGN got his nintoaster from
Yep! avgn.wikia.com/wiki/Nintoaster
They're also checkpoints in the games. (You're welcome).
SeigeGaming 9:52
And where he sent the CD add-on for the Atari Jaguar that refused to work, right?
Same, yeah.
YO
"If you're already lost, please stop the tape and find a new hobby." LOL
Nobody listens...
what was the model of that toaster?
SlasherBandit
Ahhhhhh..... metal? (I have no idea, and can't even check now).
***** damn lol
It was a Sunbeam, I can tell you that much
I got lost after I removed the board from the chasing. So I stopped and did find a new hobby. I'm a mall cop now. Yaaayy!!!
*chassis
R.i.p Dan’s Nes
u still a mall cop?
@@Malted_Pilk nope. No longer after the Covid19 crap
ACAB
You know how some art doesn't really withstand the test of time? This is a perfect example of the opposite.
Step 1: Separate the content from current events/pop culture/trending-anything, if you can. Attempt to let what you're doing stand on its own legs.
"After we remove the screws, we can now remove her top"
.... wait, what?
I like to look at my local thrift stores (Goodwill, etc.) for inexpensive toasters. You can usually get on for less than $5 and there are all sorts of styles, old, new, plastic, stainless steel, etc.
Another helpful tip is to find a toaster that doesn't have a ELECTRONIC cancel button as these a bit harder to convert into a Nintoaster. The toast "lever" won't remain depressed without power to it. This means you'll need to somehow provide power to the original toaster electronics to keep the "lever" depressed. These are more common on newer toasters, but an easy test is to press the toast handle down while it's not plugged in and if it stays down, you're golden.
^^^
VALUABLE INFORMATION
eksyte This is not necessary... I am using the electromagnet to keep the power on for the NES... Then I use the relay to power it off... It works really well. The Newer toasters are awesome to use.
venomman Never said it was necessary.
Actully it Works better IF, you use it in your Bathtub. Best to start as soon as the Water is turned on.
10 years later and I still have the Nintoaster Instructional Video jingle stuck in my head. Help me.
NINTOASTER INSTRUCTIONAL VIDEO GONNA SHOW YOU HOW TO MAKE SOME POINTLESS CRAP
I like how it looks all gritty and dirty like it was made in 1990.
The music also made it like so
that wasn't effects he was {insert reason here} at the time and brought out the Second-hand camera from the wayback machine!
OMG LIKE WAY OLD RIGHT!
@@AMPProf I burned the finished video to DVD, copied over to VHS in the most potato quality possible (even manually screwed with the tracking) and captured it back in from that.
@@victoneter Not yet. Today is September 21, 2020, and this video was posted on May 24, 2010, which is 10 years and 4 months. If we subtract 10 years and 4 months from May 24, 2010, we get January 2000, which is still not the 1990s.
Starting 2 months from now, your statement will become true.
Moreover, my original comment mentioned the year 1990, not the decade. 1990 and 2010 are 20 years apart, while 2010 and 2020 are 10 years apart.
Unfortunately, we can no longer get the parts at our local Radio Shack :(
Best instructional video ever
I'm gonna have to totally impartially agree with you.
Almost 10 years later and this video is still freaking awesome.
This tutorial, editing, and comedy is timeless. Watched it back in the day and came back to it recently. This should have more appreciation and views than it does
Heheh, thanks!
I honestly think it's peak Richard. So far anyway.
@@vomitsaw hey man, this video inspired me to start learning electronics. Today I mostly service electric guitars/amps. I literally made a guitar amp last year.
What are you up to nowadays? Do you have a page on social media or anything? I'd love to hear more from you.
Cheerz
-Phil
I just wanna say, your voice is kick ass.
I formally thank you and hope to speak again some day, should the occasion present itself.
Anytime man.
SuperSpyMario l
SuperSpyMario L
SuperSpyMario L
I thought this was actually made in the 80's until the family guy joke.
He used his nintoaster to record this video
+Anonymous Same here, watched it embedded on some site so I didn't see the comments. Had me fooled up until the giggity.
Omg parents would have freak out!
Now next is the nintoaster classic edition.
Instructions Clear, Got Nintendo Home Entertainment System stuck in toaster.
If you listen closely to the song at 2:25 you'll notice that it's a remix of comedy 1 from Webkinz Studios. That's probably why it sounds so familiar to everyone. The other parts I think are just a creation.
this needs to become a HIT in 2022
Classic! Glad this gem is still available on the World Wide Web!
DOWNLOAD IT! You never know what UA-cam is gonna do. It may be acceptable today, but not a month from now.
u still here?@@vomitsaw
@@CrazeReactsOfficial of course! I've even been streaming weekly, usually on Mondays.
man thats epic@@vomitsaw
How he made those retro looking orange illustrations, I wanna know how. I like it
I just bought an 80's toaster and will be making my nintoaster this year. I feel bad about taking apart the toaster though, it looks so cool!
i doubt anyone will see this but the toaster being used is a 1970's-80's Sunbeam toaster. They arent hard to find especially on ebay. And they don't tend to cost a lot of money. Anyways the video was funny and pretty interesting, hopefully ill be able to show a finished product within a couple months
I dont know jack shit about electronics. I watched this to the end just because it was entertaining. Good job man
I'm not sure in what capacity I should be thanking you, but I'm thanking you all the same.
Thank you.
Dude honesty mad respect for having the craftsmanship for putting something like this together. I don't know jack about using tools or building things, but I found this video hella entertaining nonetheless.
I've seen this video so many times without ever having any intention of building one myself. The presentation and voice over is so damn entertaining. It's a shame you never got more into video production. You're great at it. I mean it's been eight goddamn years and I keep coming back. That says something.
well...today he let us know he's still here. So anything is possible.
I'm nostalgic for this era of youtube.
We all are. Shit aint pretty anymore.
@@vomitsaw yeah. UA-cam is a shell of its former self.
Built one a few weeks ago thanks to this tutorial :D (Uploaded a video if anyone cares what it looks like)
Damn. You went a long way since then, huh?
@@aplsed Ten months and ten years
Got to admit that was a very nice instruction vid someday I could make a nintoaster
The ammount of time suggested here to resolder and wire that 72 pin connector is almost preposterously misrepresented. Each time I did it it took over 4 hours. I'm no soldering pro but this was blistering and requiered many many more beers.
john mimbs Just did my own this week..... 4 hours might be about right. Especially if you go back to check connectivity to make sure there is no bridging.... I know now why people are not selling nintoasters... they take soooo much time and effort.
By far the best mod video I have ever seen! Super informative, I almost died laughing! You got another sub, great stuff.
"Our DC adapter is giving us 12 volts. How do we turn 12 volts into 5 volts?"
Use a 5 volt DC adapter...? lol
Go right ahead, trooper! I won't stop you.
Yeah I have done. It works fine, as long as you use a good quality DC adapter.
It's always fun to come back to this video and just geek out, even if I'm never going to actually build my own Nintoaster. :D
Hey Richard, always glad to come see this video every so often, brings back good laughs. Hope your life has given you a break, and allows you to make videos again.
That's good to hear. :) If it's informative and/or gives someone a smile, I consider it a success, positive karma, etc.
Life has though, umm... hmm. It's been a little turbulent. I'll be covering this "shortly". 2015-2016 has been interesting.
*****
I look forward to hearing about it :)
10:52 That giggity made me laugh so hard. *giggity*
Shimmying to&Fro untill its removed.. "GoodHobbiest".. #WordsFromAShakenBaby
I laughed so hard. Best instructional otw.
bruh u can watch this video for comedy alone in 2016!
Yeah lol
Thank you. Some decent info being a plus, if you're into that sorta thing.
"It's a Nintoaster. And yes, it works." -Angry Video Game Nerd
I really didnt expect to watch the whole half hour of this when I started it. But this was exactly the right amount of information and humour to keep me going. I salute you, this is a fabulous video.
Now that the screws have been extracted, we can remove her top. I'm dying from laughter!!! XD
+Coldpepper If even all you got out of this was a smile, I've done my job. :)
NINTOASTEEER INSTRUCTIONAL VIDEO GONNA SHOWYOU HOWW TMAAKE SOME POINTLESSCRAP
That's personally my favorite part, actually. Sums things up nicely before getting too invested in the 33 minutes of video.
Cracks me up every time :) For me, this video was a wonderful introduction to the world of electronics. I can't thank you enough for making this. I found out you're going through a bit of a rough patch, so I hope that gets sorted out soon. Cheers from Mexico :)
*****
No, you wanting to strangle an infant trying to remove the RF modulator when the T1000 sneezed on the board gets me every time. Thanks to you I spit my coke all over my keyboard and killed it.
+standepain thumbs up for creating spare parts.
Just watched this last night and back again. Still one of my all-time favorite UA-cam video.
Watching the AVGN brought me here 😀
13:10 "All of which can be found at your local RadioShack"
If only you knew....
This was a great informative video, I probably will never make this but it's impressive that you put so much time into this, great job!
Thank you for taking the time to make this entertaining. I love your parody of 80's training videos.
This was great! I could never do anything like this but it was fun to watch. You also nailed the instructional video theme from the old days.
had to trash all I did up to 13:07 since there are no local radio shacks...
+The SwampFox (Zeke Ortiz) I think he was making a joke.
+The SwampFox (Zeke Ortiz) don't feel too bad. It's an extremely unfunny joke because everyone watching this had the exact same thought
Jonathan Unger sucks that you have no sense of humor and miss obvious jokes/sarcasm.
+The SwampFox (Zeke Ortiz) the best part of all of this is the number of people upset over my sarcastic joke. upset because they didn't understand the joke and trying to justify why I am in the wrong, it's amazing.
actually you can buy those parts at micro center or amazon
Enjoy this aardvark while you wait
"Nintoaster Instructional Video. Gonna show you how to make a pointless crap" that jingle lived rent free on my head for 10 or so years
Play it again, it wants to move back in!
@@vomitsaw Aye aye, Captain
I opened my first NES today, its dirty and the cable connections are stiff but i feel so calm being guided by this tape
Be not afraid! Unless there's a brown recluse in there, then be a bit afraid.
@@vomitsaw No spiders but evidence of some liquid, probably a spilled beer. The RF Modulator is kicking my ass.
@whiskedragon Ah, great way to clean off gunk like that is a toothbrush and some 91% rubbibg alcohol. 70% works fine too, just takes a lil' bit longer to dry.
As for the RF modulator... oh yeah, I know the pain. A bunch of solder wick and a high wattage iron with a fat-ish tip is your best bet.
Lmao @ 13:07, I love the FEAR BOARD. It took me a few watches through this video to catch that.
Wow, is it really danooct1? You were watching this video 10 years ago? Wow!
"if it doesnt work u fucked something up " favorite quote of all time
This is my go-to background noise when working. You are brilliant and I simply want to express my gratitude :)
If anyone is wondering why this video is so good then it's probably the fact that the guy's voice is perfectly adjusted so he is easy to understand. This was literally the clearest sets of virtual instructions I've ever followed.
Is this the same Nintoaster that the AVGN uses??
that it is
Paul Lizzi Yes.
yes
Paul Lizzi yep
Paul Lizzi yes
9:33 Made me laugh so hard
LOL likewise :D
Gesundheit, T-1000!
Such a great idea of using the plastic guides for the game with the curved out ends. Good job!!
Freakin' amazing! That was the greatest instructional video I have ever heard. Well done sir. I had a blast watching it.
I loved this video when it came out... still do today. 2019.
gonna say many thanks for the video, i could build my own Nintoaster with it, i even sent pics of it to your mail.. (hope that wasn't way too much)
I am in the process of making mine with an rgb mod to use on a pvm. I am avoiding use of hot glue and epoxy; all pieces are pre-fabricated and screwed-on for easier servicing and durability. It is a TON of work.
Nice! Yeah, that's the ideal way to do it if you can pull it off. All the epoxy is a bit jank.
This is the greatest thing I've ever seen. I love the 80's style, right outta edutainment videos from school. Good job. If I wasn't dirt poor right now I'd ask if you did commissions.
After doing some calculations i concluded that your description is fairly accurate. According to your description, Other makes up about 5% of the video. This being the historical intro that you created before the supply list and the part where you mention to take a drink of wine beer or apple juice. Thats about 57 seconds on the dot which comes fairly close. The bullshit according to my calculations takes up around 3.31 minutes of the video. Bullshit moments include the diy wrist strap setup which takes about 1 minute and 20 seconds, the quote where you explain that if you dont know how to use a desoldering iron takes about 7 seconds, the part where you throw away the expansion port takes about 5 seconds, 13 seconds for your RF modulator rant, 2 seconds for your AMERICAN ELBOW GREASE quote, and another 2 seconds of you throwing the RF modulator out for good measure. Also 10 seconds for you pointing out the cartridge connector and 5 seconds for giving us an unnecessary second look of the wiring diagram and 23 seconds of explaining the uselessness of the standard nes cartridge connector. This totals to about 2.28 minutes which is about 1 minute off. The rest which the description claims to be educational is subtracted from our total stray time of 4.96 minutes. The total educational time claims to be 1689.8 seconds. Adding those values together we see the total time is about 1987.4 seconds converted to minutes gives us 33.1 minutes. I see you're a man of your word.
...If this math checks out, I'm going to send you something. It MIGHT be a dirty sock, it might be something INSIDE of a dirty sock.
Great video! Extremely informative and entertaining, but I don't like how the list of parts at the beginning is missing the hard drive cable, the game genie, the momentary push button switch, 220 ohm resistor, 33 ohm resistor, 2n4401 transistor, perf board, NES, and toaster. I just like my list of parts to be complete. I will be attempting to make one this summer, I will let you know how it turns out
***** your video has been invaluable and I'd never be able to even attempt this without it, but i was wondering, would it work if i reattached the RF modulator with wire instead of creating the video amplifier circuit and creating a new power circuit? I have the room in my toaster, and it seems like it would save me quite a bit of work.
Watch the whole video before taking on this project and you'll have all of the info you need.
eksyte I've watched it several times. I was just asking about something he did not cover.
Too drunk. Too drunk,.
SuperMagMachine You dont need a game genie.. its a waste of money if you dont own one. Get this. www.digikey.ca/product-detail/en/0/A31721-ND
I don't even plan on making a Nintoaster of my own but i still enjoy watching this video for some reason, I find it entertaining.
I don't even know what I'm doing here, but the vibe of this video is amazing.
Just let it roll, maybe something will happen! If not, that's okay. If is, you done did!
These companies and their connectors. Why could it not have a standard 2.54 pitch and went for 2.50 pitch instead?
My other gripe is G2 connector on Dreamcast. What the heck is this? 2mm pitch, shifted, short flange, keyed outside. Who comes up with this shit?
Music.
www.dropbox.com/sh/e037yspvyakdvsb/AADtgzZoTd6U1qvL3iZ_s5N9a/NintoasterVideoMusicFINAL.mp3?dl=0
RemTech You are my savior! I've been looking for this for forever! Thank you so much!
i love you so much right now
My fucking hero. Never did find it on their website, unless I'm just blind...
this is the greatest tape in the history of mankind. If I ever teach an electronics class anywhere, I am playing this video for the class every single year
this just makes me wish i took electronic class seriously in school. i did it without much of a choice since i needed credit. but in adulthood it makes me regret not being fully invested in the subject. this was fascinating to watch.
I still don't even know that much about electronics beyond the basics and how to solder/desolder.
What kind of toaster is used?
+Weekly Gaming An old Sunbeam model, I think. My cousin used to work for a moving company and would snatch up a few things that their clients were throwing away in the process. This toaster was one of them. Saved from the landfill to be reborn as... well... an NES chassis I guess.
Squire www.google.com/shopping/product/1?q=vintage+sunbeam+toaster&client=safari&sa=X&hl=en-us&biw=1024&bih=671&tbs=vw:l,mr:1,cat:762,pdtr0:707051|707052,ss:44&prmd=sivn&prds=num:1,epd:12194434497469659639,paur:ClkAsKraX-Ij8XSTH6POZ2eqgQZ1hRh9Ex531t17LVD_eBLwrYMX80wkmaoi5vS4z9gn8or78BbSY8beXXWXjTEMHXtRtVarxAj4d6-CqVqJg9ZZzy426vLCNRIZAFPVH73NlUF9F4t3Lj1hVE4_nGDKrHna2Q,prmr:1,pid:12194434497469659639,cs:1&ved=0ahUKEwj6gIarvrbdAhUnc98KHX8RAm8QgjYIigU
Ok
I don't have a nintendo console
I don't have a toaster
I don't know anything about electricity
I only have a screwdriver
I can't believe that I just watch the entire video
Should maybe at least get a toaster.
piou77piou ...who the heck doesn't have a toaster!?
Damian Freeman Well. Now you can proudly say "Hey I know a dude on youtube who doesn't have a toaster !" XD
Oh and guess what ? We also didn't have a Microwave. But that is my fault because I burned it T-T
Then why did you bother watching it in the first place if you didn't have a NES, Toaster, or Jack Shit about Electricity?
DanTheMan1985ful
Why did you?
i've watched this so many times it's so freaking entertaining. you've inspired me to build a Gentoaster.
I always have this on a loop when I draw. Very good to have in the background when I'm in need of an idea and work atmosphere.
This is good shit.
Well I was stupid. I got excited, went bought an extra Nintendo, bought a toaster, bought the tools that you mentioned at the beginning of your video and then you mentioned plexi glass -_- I don't know anything about plexi glass lol
ManiacCuboneTCG its easy enough to work with a cheap heat gun will soften it enough to bend the stuff.
okay thanks
emart88 Yeah, using a couple pieces of wood and a couple C clamps makes the job waaaaaaaay easier.... I tried using a stove and some gloves first LOL
+emart88 4ft thick plexi-glass not only will not bend it is also bigger than the toaster. Please send for hulp.
Did you make yours?
It's really not that hard, but it can be intimidating if you haven't use a training breadboard before. The squiggly lines are the resistors, the circle with the three lines (base, emiter and collector) is the transistor, the straight lines are cables, which you use to connect two items (e.g. one side of the 330 Ω and one side of the 220 Ω resistor, or the other side of the 330 Ω resistor to the emmiter side of the transistor) by soldering.
I remember watching this video, finding a spare but working NES at my local swap meet, finding a cheap toaster at the Goodwill, and showing my older brother all of this because I figured he could help me make my own (I still have most of everything, NES and toaster, the project simply got "shelved" because of other personal matters, and in more recent years, I decided "fuck it" and I put the NES back together as it originally was, just now region-free), all while we still had Radioshacks. Now they're pretty much history, but that's no matter, a lot of this stuff can be found easily anywhere else - Lowes, online sites like ebay or amazon, thrift shops and swap meets/flea markets, and so on. Also no, I never did make my own Nintoaster - I may one day, but I never got passed the "diagrams" for wiring or soldering the electrical stuff....
Oh, point of my comment though, I love this video. Very informative and helpful, and entertaining to boot.
Vomitsaw: Some personal fuel
Me: *pulls out Diet Coke*
shit just burnt my table XD
We call that "character". Your table just leveled up.
one of the funniest and entertaining tutorials I've ever seen.
Educational too! (No seriously, it kinda is!) ...Sorta.
Still one of my favourite videos on youtube, stay awesome my friend.
"...Strangle an infant" Fuck, I miss 90's-early 2000's humor.
Can't stand the over sensitivity these days. I get yelled at for saying "Fuck" I wonder when we're gonna get ticketed for saying profanities >_>
Billy joebob hahaha
This is better then i ever could of imagined. very informative, nailed the era perfectly
Well thank you! Some of the information could be updated now (no more RadioShack, better options than the 7805, etc.), but overall still holds up.
For some reason, watching this video is extremely pleasant for me, even though I kbow nothing about electricity and will not attempt to make a Nintoaster.
Please do more os these kind of videos.
There's another pretty odd one coming. :)
That video is pure awesomness, great job Vomitsaw. Watched this atleast 5 times ;)
'GUNNER SHOW YU HOW TO MAKE SOME POINTLESS CRAP' sold me on this video.
I would not be able to do this on my own and have no experience whatsoever but I was hooked throughout this instructional video and think you did an awesome job!
Never mind guys, I figured it out, I never connected the 5vdc to the transistor, thank you anyway future posters
This is one of the most iconic internet videos.
13:11 RIP RadioShack. Always in our hearts.
That does legitimately suck. The prices were terrible, the selection weak, but when you needed something in a pinch, the Shack was there. ...Sorta.
That give me the idea of getting the needed game systems, getting a vacuum-tube tele, and gutting the tele of the tube, and building all the game systems into the casing, using a flatscreen as the new screen.
As cheesy as it was, this is probably one of the most in depth and helpful tutorials i have ever watched.
From now on, my videos will have this quality. The atmosphere is superb.
This video fills me with happiness every time i see it.
The transcribed captions for this video are incredibly hilarious.
I think we need a version of this. I'd love to watch in at least 720p
This is a great video. Maybe, in a few years, when I'll be able to do this kind of magic, I'll build a Nintoaster. I've already got an NES.