Thank you Daniel! The holidays were great! now it is full focus again on making content and looking forward to the spring! I hope your holidays were great too!
Thank you so much Luke! Becuase of comments like yours it inspires me to keep doing this and motivates me. So thank you so much, your comments are much appreciated!
Hello from North Dakota USA, another good video, I'm going to have to try your glue and foil scales on some swimbaits I've watched alot of your videos and you seem to like using the foil... thanks Charley @ K.O.B.B (kranky ole bastard baits)
Hi Charley! Yea I love to used at the end of a paintjob. ( on top of the paint) Because when painting onto the foil the paint somehow brightens up and makes the foil lose a bit of its shinyness if you get what i mean :D so I tried to only use it as a last step or on gillplates , it is worth a little bit of experimentation! Thank you for your comment, much appreciated!
Another good option to create scales is to use 'expanded metal' sheets to wrap across your lure, then airbrush thru from two polar opposite directions with dark and light paint. The expanded metal keeps its shap contoured round the lure and different scale sizes are available. It may be called 'gauze', but it is the stuff you get for bodywork repairs?
@@lureblanks you're welcome. The expanded metal is available at different hole sizes so you can select the appropriate scale for the size of your lure blank?
Liking the videos very informational and nice techniques to watch and learn on for someone just getting into it. If you don't mind me asking what's your clear coat process ? Been looking around for information for something on the easier side to use that's not UV resin or a 2 part epoxy that's durable for fairly toothy fish. Thanks for any advice 🙏
Thank you Aaron and glad you liked the video! Unfortunately I also use 2 part epoxy and UV resin for my lures. I have used waterbased polyester based finishes too but they do not hold long with toothy fish, only 2 bites and it is really damaged. I would suggest to bite through and learn to use either 2 part epoxy or uv resin, this is going to make your lures last a long time and once you got the set up correct you never need to change it. Other options would be using 2k automotive clear coats, but these are very toxic and best used with a spare airbrush not used for painting. Or KBS diamond clear from the USA but i am not sure how long that will hold with toothy fish. I started of with 2 part epoxy and not so long ago switched to UV resin, UV resin requires a more specific set up but it is much easier in my opinion. You do not need to heat the room, it cures quickly and you do not need to mix anything or use a new brush everytime
It is this foil 👍 :lureblanks.eu/parts-and-tools/foils/metallic-foil/?7825177=g-name-a-48-1-filter:JTdCJTIyZmlsdGVyJTIyOiU1QiU1RCwlMjJwcmljZSUyMjolN0IlMjJtaW4lMjI6MCwlMjJtYXglMjI6OTk5OTk5OTk5JTdEJTdE
Wooo! There are only a couple channels that I get excited about when a new video drops. 🙌.
(This is one of them!)
That is the biggest compliment a youtuber can get! Thank you so much for that!
Good to have you online again with great content.
Hope you had a great holiday
Thank you Daniel! The holidays were great! now it is full focus again on making content and looking forward to the spring! I hope your holidays were great too!
More useful information🤩 thanx again🤘
Glad it was usefull! Thank you so much for the comment! 🤘
Amazing as always..love your videos..I learn so much..I look forward to the next one 🎣🍻
Thank you so much Luke! Becuase of comments like yours it inspires me to keep doing this and motivates me. So thank you so much, your comments are much appreciated!
Awesome my man
Thank you!! 👊
Hello from North Dakota USA, another good video, I'm going to have to try your glue and foil scales on some swimbaits I've watched alot of your videos and you seem to like using the foil... thanks Charley @ K.O.B.B (kranky ole bastard baits)
Hi Charley! Yea I love to used at the end of a paintjob. ( on top of the paint) Because when painting onto the foil the paint somehow brightens up and makes the foil lose a bit of its shinyness if you get what i mean :D so I tried to only use it as a last step or on gillplates , it is worth a little bit of experimentation! Thank you for your comment, much appreciated!
Another good option to create scales is to use 'expanded metal' sheets to wrap across your lure, then airbrush thru from two polar opposite directions with dark and light paint. The expanded metal keeps its shap contoured round the lure and different scale sizes are available. It may be called 'gauze', but it is the stuff you get for bodywork repairs?
That sounds really interesting! I will look into that, thank you so much! 🙏
@@lureblanks you're welcome. The expanded metal is available at different hole sizes so you can select the appropriate scale for the size of your lure blank?
Snyggt jobbat
Tack så mycket!!
👌
Jag måste öva på fjäll!! Jisses va grym du är wannes!
Haha Tack vännen! Alltid kull att få en kommentar från dig också! 🙏 😁
so good
Thank you so much!
Kul att se lite avvdin nya studio. Hoppas allt är bra med er.
Jajämen! Fint och varmt där inne :D Allt går bra här och där med hoppas jag :D
Liking the videos very informational and nice techniques to watch and learn on for someone just getting into it. If you don't mind me asking what's your clear coat process ? Been looking around for information for something on the easier side to use that's not UV resin or a 2 part epoxy that's durable for fairly toothy fish. Thanks for any advice 🙏
Thank you Aaron and glad you liked the video! Unfortunately I also use 2 part epoxy and UV resin for my lures. I have used waterbased polyester based finishes too but they do not hold long with toothy fish, only 2 bites and it is really damaged. I would suggest to bite through and learn to use either 2 part epoxy or uv resin, this is going to make your lures last a long time and once you got the set up correct you never need to change it. Other options would be using 2k automotive clear coats, but these are very toxic and best used with a spare airbrush not used for painting. Or KBS diamond clear from the USA but i am not sure how long that will hold with toothy fish. I started of with 2 part epoxy and not so long ago switched to UV resin, UV resin requires a more specific set up but it is much easier in my opinion. You do not need to heat the room, it cures quickly and you do not need to mix anything or use a new brush everytime
Saudações 🇧🇷🎣🎣
Greetings to you too! 😀
What is this for a foil
It is this foil 👍 :lureblanks.eu/parts-and-tools/foils/metallic-foil/?7825177=g-name-a-48-1-filter:JTdCJTIyZmlsdGVyJTIyOiU1QiU1RCwlMjJwcmljZSUyMjolN0IlMjJtaW4lMjI6MCwlMjJtYXglMjI6OTk5OTk5OTk5JTdEJTdE