How to Replace Front CV Axle 2002-2007 Jeep Liberty
Вставка
- Опубліковано 6 бер 2022
- Buy Now!
New CV Axle Shaft from 1AAuto.com 1aau.to/ia/1AACV00179
A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This video shows you how to install one in your 2002-2007 Jeep Liberty.
This process should be similar on the following vehicles:
2002 Jeep Liberty
2003 Jeep Liberty
2004 Jeep Liberty
2005 Jeep Liberty
2006 Jeep Liberty
2007 Jeep Liberty
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 10mm Wrench 1aau.to/oa/1AXAA00010
• 17mm Wrench 1aau.to/oa/1AXAA00010
• 21mm wrench
• 17mm Socket 1aau.to/oa/1AXAA00015
• 18mm Socket 1aau.to/oa/1AXAA00043
• 19mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• 36mm Socket 1aau.to/oa/1AAST00006
• Brake Caliper Hanger 1aau.to/oa/1AXAA00084
• Dead Blow Hammer 1aau.to/oa/1AXAA00091
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• E16 Inverted Torx Socket
• 1/2 Inch Ratchet 1aau.to/oa/1AXAA00043
• 3/8 Inch Drive Ratchet 1aau.to/oa/1AXAA00015
• Socket Extensions 1aau.to/oa/1AXAA00015
• Torque Wrench 1aau.to/oe/1AXAA00044
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oa/1AXAA00065
• Pick 1aau.to/oa/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Jeep Liberty 2002-2007 1s Gen: • Jeep Liberty 2002-2007...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Thank you so much! I'm a single mother of 6. I don't have the money to pay shops so everything that gets done on my vehicles is done by me. I learn as I go. I'm terrified every time I start a big project. Your video is detailed and shows everything well. I also appreciate that you told what size sockets you were using and explained everything so I could make sure I had everything needed before I got started.
I've watched a lot of repair videos. Yours is by far one of the better ones. You're a blessing!
Good video, clear and concise.
I like that you didn't spend `5 minutes telling us what you were going to do.
TIP!! Break the axle nut free and make sure it spins somewhat freely before you take the brake caliper off otherwise you'll have to find another way to stop the bearing from spinning.
Great idea, thank you!
Or if u have power tools it’s can be done with out the wheels
On my 07 liberty when I try to remove the passenger cv axle, it is pulling the whole axle out of the diff I’m assuming, what is wrong, why won’t the cv just come off?
Excellent presentation, thanks for posting!
Is removing the bearing assembly really required to get the spline out of the knuckle? 1:57 time hack
I don't see no reason to remove the hub just extra work.
Yeah, there was no reason to remove the wheel bearing . That does seem like extra.
Excellent video, very helpful.
Very helpful thank you
The 21 in but what’s the bolt called. The clivix?
Uhh...wazzat "let's go ahead and torque that axle nut to a hundred foot-pounds," or "let's go ahead and torque that axle nut 200 foot-pounds"?
What do you do if the intermediate axle is stuck in the cvshaft?
Not this easy when it is old rusted parts , done a whole frontend rebuild twice on these vehicles , you may have to heat up bolts , and use a real hammer .
the video was great, but the TRQ website isn't working right. Wasn't able to look at any parts to buy.
What about the intermediate shaft?
Help me!! My jeep liberty 2002. the brake is on, why?
what happens when you can’t just pull the clevis pin right out and trying to tap it out bends the forks apart?
One more bolt and you could remove the clevis fork, easy to remove the axle that way.
How long did the whole process take? My guess is 35 mins.
🤑😂 I'm cope up on this video fast 🇺🇸 n cool
Sooo.. Torque everything to a 100 ft lbs, Roger that.
Removing the bottom portion of the strut(aka the clevis) would have made this so much easier.
0000