"'May have hit a tree. Tends to happen when you shoot in a forest" You get wiser with each video, Sir. And we, by extension, are educated by your wiseitude.
Too large for even k14? Give it *narrows eyes dramatically, the helicopter spring, lol. Wonderful vid as always sir, take my algorithm boosting comment.
Woohoo! Finally the regenerator gets his time in the spotlight. I opened mine and saw that fat plunger tube and knew it had to take something, but couldn't find a spring to fit. I think I might have been badgering you for this one for over a year :) thanks for obliging me. Now, on to the next one! Can the xshot crusher take a k26? Should be great fun stomping around an hvz campus event with a crusher and a 100 round chain
I’ve been wanting the regenerator on this, I painted one new-years colors and hope to get it modded, I’m not done with the video but I doubt it can, the stock spring is a thicc boi EDIT: I was correct
hey waaaait a minute! the wall next to the chrono changed to hammer shots! or am i losing my mind? probably that one hmmm edit: i have made a fool of myself! i had not noticed that the camera angle merely changed slightly, i look silly now!
Hey brother! Thank you so much for including more available spring types such as k25, k18, and what k-stuff you have on hand. Those of us who appreciate science especially appreciating knowing exactly what spring you're using. I also love it when you find a piece of K26 that's 'just the right size.!'😉 MrScott54, BionicBlasters.😇😃🤓😎🤠
You can try padding the plunger-head with a very soft rubber made from a very soft toilet rubber plug thingy. It's my go-to plunger-pad for the materials ability to absorb so much impact.
I know like 5 other people have probably said this before, but that’s a Ninja line. Like the Fortnite UA-camr dude. I think that’s called an excell or something along those lines considering how a lot of XShot things are recycled yet good.
Yes Ninja is the name of the line xshot did in conjunction with the youtuber of the same name, and was a limited run. But the more widely available version is is called the fury 4 with xshots white and blue colour scheme. Internals should be exactly the same but the plastic colours are different 😉
Maybe is not going to take a K26, but you might like this one since is double action, the Dart Tag Snapfire 8, the only thing I had to do is reinforce the internals with epoxy because they tend to break after 1000 shots or less according to Reddit. Despite the negative aspect of the internals is a great emergency or backup plaster and it looks like Earthworm Jim or even Stitch would use these since the Snapfire 8 design looks like a disintegrator pistol from a retro sci-fi comic or animated show.
I am a huge fan of the xshot darts. Firing half-lengthed ones out a prophecy results in hilarity when they shoot OVER cover and then dip down into an unsuspecting target
Let's put some more springs in,,, when you were putting the final screws in, made me laugh, also if you hit a tree with a dart in woods does it make a noise?
Thank you for this as always, Captain! I just have a question about the Regenerator; does the harmonica clip slide around in the blaster too badly (I'm told the Battlescout had this issue) or is it relatively secure so one doesn't have to worry about skipping shots? I've been intrigued by this one for the fun, modular factor for a long time, so, just wondering!
A couple of questions... where did you get the second spring from? And the planishing hammer you have? I was planning on brassing and adding a different spring for the 6 shot version of that blaster... which i painted copper for the main part and black for the grips.... also i plan to see if the rotation mech can handle a stronger spring of its own.... then when it works well i plan to add two rail mounted dart holders each blaster... any advice is greatly appreciated o guru of foam... plus i used putty to fill in the dead space of the plunger head, removed the air restrictor and padding the plunger head... thanks Captain.... always love your videos... especially the cool intros...."what did you do to this thing?" Lol
wondering if you've ever handled an x shot tk3 / mk3? it's a genuinely nice little blaster, despite the lack of auto rotating barrels, feels like a great option as a backup, surprising amount of pop for the size
I'm glad there is a company still making front loader style darts still considering Nerf is no long producing them, and since there are Nerf brand blasters that still only support front loader style darts.
I don't think that first blaster is called the Ninja. I don't know what the name is but the blaster stems from X-Shot's partnership with the pro-gamer and streamer, Ninja.
Correct. The original version is called the Fury 4. And technically this one is called the No Rez. But Ninja is more fun to say and it clearly says Ninja on the blaster.
Every time I hear about something going wrong inside when it won't catch..I want to see the blaster opened and just everything inside broken to bits from too much power..
I was wondering did you get the rotation to work better? I got mine up from 82.4 to 95 on average but id say once out of ten shots and the cylinder doesn't rotate... cool vids btw
...dude, I saw it the first time you commented. I get notified of all new comments on all videos. Spamming is annoying, rude, and a REALLY good way to not get your question answered.
As far as I know neither k25 or k26 will work in the stinger. They are both too large. There are, however, springs made specifically for it. Or rather for the jolt (which should also work in the stinger) just Google "jolt upgrade spring."
I do like the new table mat. Good video as always. I want to see a K26 Rival Curveshot video to see how the spring upgrade impacts the “curve” Nom,nom,nom algorithm nom,nom,nom
"'May have hit a tree. Tends to happen when you shoot in a forest"
You get wiser with each video, Sir. And we, by extension, are educated by your wiseitude.
*"A skooch higher frequency"*
Ah yes, my new favorite unit of measurement.
A skootch is 1.4 metric smidges.
I grew up with scosh myself lol
These episodes never get old!
Too large for even k14? Give it *narrows eyes dramatically, the helicopter spring, lol. Wonderful vid as always sir, take my algorithm boosting comment.
Woohoo! Finally the regenerator gets his time in the spotlight. I opened mine and saw that fat plunger tube and knew it had to take something, but couldn't find a spring to fit. I think I might have been badgering you for this one for over a year :) thanks for obliging me.
Now, on to the next one!
Can the xshot crusher take a k26? Should be great fun stomping around an hvz campus event with a crusher and a 100 round chain
Ooh, new tabletop!
No, just a cutting mat on my usual table.
@@CaptainXavier who is Mat, and why are we cutting him on your table?
mat
/mat/
a small piece of cork, card, or fabric placed on a table or other surface to protect it from the heat or moisture of an object placed on it.
Not to be confused with Matt: a guy who owes me money.
@@CaptainXavier that certainly explains why we are cutting him on your table
The Ninja almost did the “Can it take a K25?” hidden achievement.
“That’s a noisy one” *butterfly noises intensifies*
I love this series. Can the boomco blasters have K26? Also does the dart zone sentry have slamfire?
You can check his previous videos. The BoomCo M6 can handle K26 really well.
According to what I’ve heard ALL spring powers boomco blasters can indeed take a k26
@American Foam Hey!
@American Foam Blimey I didn't know you watched this channel
@American Foam how long do you think they will last from k26
Ave Captain. Pleas never ever change... you magnifficent beard!! It is just glorious! 😁😁 Stay save out there.
Watching you miyagi these blasters is so joyful. Fully satisfying.
Dear God, that beard is absolutely glorious!
I’ve been wanting the regenerator on this, I painted one new-years colors and hope to get it modded, I’m not done with the video but I doubt it can, the stock spring is a thicc boi EDIT: I was correct
Captian
Another fantastic K-26 Episode.
This series is awesome. Keep up the great work.
hey waaaait a minute! the wall next to the chrono changed to hammer shots! or am i losing my mind? probably that one hmmm
edit: i have made a fool of myself! i had not noticed that the camera angle merely changed slightly, i look silly now!
Hey brother! Thank you so much for including more available spring types such as k25, k18, and what k-stuff you have on hand. Those of us who appreciate science especially appreciating knowing exactly what spring you're using. I also love it when you find a piece of K26 that's 'just the right size.!'😉 MrScott54, BionicBlasters.😇😃🤓😎🤠
You can try padding the plunger-head with a very soft rubber made from a very soft toilet rubber plug thingy. It's my go-to plunger-pad for the materials ability to absorb so much impact.
I know like 5 other people have probably said this before, but that’s a Ninja line. Like the Fortnite UA-camr dude. I think that’s called an excell or something along those lines considering how a lot of XShot things are recycled yet good.
The name is apparently "No Rez" but "Ninja" is more fun to say.
Yes Ninja is the name of the line xshot did in conjunction with the youtuber of the same name, and was a limited run. But the more widely available version is is called the fury 4 with xshots white and blue colour scheme. Internals should be exactly the same but the plastic colours are different 😉
Thanks for all your hard work!
Maybe the Ninja is supposed to be the teacup of X-Shot blasters Captain, the proper way to use it is with your pinkie finger out.
I would love to see you do a video on the x-shot crusher!
I bet turf strongarms springs would work lovely in the Ninja thing or any of the other colour versions of that blaster
Maybe is not going to take a K26, but you might like this one since is double action, the Dart Tag Snapfire 8, the only thing I had to do is reinforce the internals with epoxy because they tend to break after 1000 shots or less according to Reddit. Despite the negative aspect of the internals is a great emergency or backup plaster and it looks like Earthworm Jim or even Stitch would use these since the Snapfire 8 design looks like a disintegrator pistol from a retro sci-fi comic or animated show.
That Ninja is one of my favorites, reliable little blaster even at stock. I may have to play with some upgrades after seeing this.
4:48 kkkk..k26 tttt..too small!?
Power and size are not the same thing. K25 is weaker than k26 but has a larger inside diameter.
Are there not other industrial springs that offer the same compression at maybe a wider inner diameter
I am a huge fan of the xshot darts. Firing half-lengthed ones out a prophecy results in hilarity when they shoot OVER cover and then dip down into an unsuspecting target
Let's put some more springs in,,, when you were putting the final screws in, made me laugh, also if you hit a tree with a dart in woods does it make a noise?
I was gonna make the same comment, but you beat me to it. It made me laugh as wel.
It would be cool to see more X shot blasters especially the crusher and maybe the quick slide too?
I was wondering if K25 would fit in the bug attack eliminator? That ninja is such a nice little blaster.
if a blaster did explode from k26, would you still upload the footage?
Absolutely
Yay
Thank you for this as always, Captain! I just have a question about the Regenerator; does the harmonica clip slide around in the blaster too badly (I'm told the Battlescout had this issue) or is it relatively secure so one doesn't have to worry about skipping shots? I've been intrigued by this one for the fun, modular factor for a long time, so, just wondering!
It is fairly secure. It has 2 sets of locking tabs to hold it in place.
@@CaptainXavier Awesome to hear, thank you, Captain!
A couple of questions... where did you get the second spring from? And the planishing hammer you have? I was planning on brassing and adding a different spring for the 6 shot version of that blaster... which i painted copper for the main part and black for the grips.... also i plan to see if the rotation mech can handle a stronger spring of its own.... then when it works well i plan to add two rail mounted dart holders each blaster... any advice is greatly appreciated o guru of foam... plus i used putty to fill in the dead space of the plunger head, removed the air restrictor and padding the plunger head... thanks Captain.... always love your videos... especially the cool intros...."what did you do to this thing?" Lol
the reason you get so much lower with the adventure force darts because the darts burst under the pressure
Weird fact: the NERF specter barrel fits in a demolished stock nicely just thought I'd add that. Also big fan
Edit: demolisher
Stupid auto correct
And there should be a comma ten points to whomever finds where
What's up my brother from another mother
It’s the legend himself
Happy Late Birthday!
Maybe that spring you used in the Regenerator is a Roughcut spring?
Good day to you sir
And if you have a stock Jaguar take the spring out and put it in a Mediator and drill out the AR and it shoots good
wondering if you've ever handled an x shot tk3 / mk3? it's a genuinely nice little blaster, despite the lack of auto rotating barrels, feels like a great option as a backup, surprising amount of pop for the size
probably?
how has the year served you captain?
It is only March...way too early to tell.
@@CaptainXavier makes sense. Thanks for the help with filament a while back by the way.
I would love to brass the small blaster
Along with ARs removed and spring mod
K26 episode the Caliburn. 😂
And after that I can do a video about whether or not a Nerf Rival blaster can fire Nerf Rival ammo...
Try the newer X-shot blasters (dino attack, crusher, vigilante, etc.)
I'm glad there is a company still making front loader style darts still considering Nerf is no long producing them, and since there are Nerf brand blasters that still only support front loader style darts.
What do you mean Nerf is no longer producing front loaders? More than half of the Elite 2.0 line are front loading.
3 out of 4 of the Dinostrike blasters are front loading.
All but 1 of the Roblox Blasters are front loading.
All but 1 of the AlphaStrike blasters are front loading.
Literally all of the Dragon Power blasters are front loading.
Captain, I put an ultra spring in my magnus and it hits hard
Curious about the Regenerator. Would the size of the Aeon Pro spring be similar enough to swap into the Regenerator?
Worth a try. If you try it, let me know.
I don't think that first blaster is called the Ninja. I don't know what the name is but the blaster stems from X-Shot's partnership with the pro-gamer and streamer, Ninja.
Correct. The original version is called the Fury 4. And technically this one is called the No Rez. But Ninja is more fun to say and it clearly says Ninja on the blaster.
The ninja is great with half darts.
So is the x shot micro once you cut out the dart peg
Every time I hear about something going wrong inside when it won't catch..I want to see the blaster opened and just everything inside broken to bits from too much power..
I'm just going to put in a riddle for the algorithm.
What has four legs in the morning, two legs in the afternoon and three legs in the evening?
I was wondering did you get the rotation to work better? I got mine up from 82.4 to 95 on average but id say once out of ten shots and the cylinder doesn't rotate... cool vids btw
Not really. It got a little better but I think I still had issues.
@@CaptainXavier i am going to test it but seemed that if i primed too slow it didnt rotate but a nice quick tug worked.
Hi Captain - did you try a Kronos spring?
Does anyone else get major M8 Avenger vibes from the regenerator?
have you put any holes through your targets yet?
Nope
Hey man I was just wondering can a k26 or a k25 fit a stinger sd 1 alpha strike series if don’t what spring would give it more power and would fit?
...dude, I saw it the first time you commented. I get notified of all new comments on all videos. Spamming is annoying, rude, and a REALLY good way to not get your question answered.
As far as I know neither k25 or k26 will work in the stinger. They are both too large. There are, however, springs made specifically for it. Or rather for the jolt (which should also work in the stinger) just Google "jolt upgrade spring."
can the Rey (Island Journey) Blaster take a k26
The what?
Star Wars blasters take weird tapered springs, so unlikely.
Season 4, episode 17: Nope
I do like the new table mat. Good video as always. I want to see a K26 Rival Curveshot video to see how the spring upgrade impacts the “curve”
Nom,nom,nom algorithm nom,nom,nom
They are next on the list.
Can the K'NEX K-Force Battle Bow Build and Blast Set take a k26?
I covered K'Nex blasters at some point. As far as I can tell it is the came core piece.
ua-cam.com/video/q55v8-TRwjk/v-deo.html
@@CaptainXavier amazing, thank you
I literally just learned about these K'NEX blasters
I did not see the following one and was hoping you could test it for K26. Nerf Marvel Avengers: Infinity War Nerf Captain America Assembler Gear
Can the little tykes My First Mighty Blasters take a k26??
I doubt it. I would be willing to bet they do not use compression springs.
How is u captain xavier
I are well
@@CaptainXavier that good captin
Can a K25 take a K26 🤔
Yes
*pulls out the k14*
Yeesssssssss....
*still not big enough*
Nooooooooo....
I just want to see a blaster explode... is that too much for one to ask?
No Rez if you're looking for it
Or Fury 4
Blue
8:58 behave Youre spelf
hi
Hi
Hi
Lol