The arrangement of your hoses that you had at 08:46 seemed ideal to me. If the hose to the condenser shifts, it'll only tighten the connection. I don't think it would move. That bodged trans cooler is well done!
@@boostedonabudget9018 no it's not. There might be a high side fitting on the condenser. The only 2 places you can have a low side port is either on the drier, or on the suction line that connects the drier to the compressor.
@@boostedonabudget9018 dude regardless of what vehicle you have the only place the refrigerant is under low pressure is in-between the evaporator in the dash, and the compressor. Every fitting on or near the condenser is on the high pressure side of the fitting. I honestly don't even know how you managed to charge it unless you have an ac machine sitting around.
The arrangement of your hoses that you had at 08:46 seemed ideal to me. If the hose to the condenser shifts, it'll only tighten the connection. I don't think it would move.
That bodged trans cooler is well done!
I have a 96 and wanna do the same do u have a list of all the parts we need to do this?
so how did you charge it without any ac service ports?
The low side is in the condenssor
@@boostedonabudget9018 no it's not. There might be a high side fitting on the condenser. The only 2 places you can have a low side port is either on the drier, or on the suction line that connects the drier to the compressor.
Bro i had to take off the grill not all models are the same specially for old trucks and aftermarket parts.
@@boostedonabudget9018 dude regardless of what vehicle you have the only place the refrigerant is under low pressure is in-between the evaporator in the dash, and the compressor. Every fitting on or near the condenser is on the high pressure side of the fitting. I honestly don't even know how you managed to charge it unless you have an ac machine sitting around.
I did it with a ac machine
Hey have you got the wiring figured out for the a/c. I have a 96 with the the same one wire compressor. And all originala/c wire in tack.
I still have not done it the whether got cold so i just hold off on that.
I think this would not fit on my truck acesories because my water pump hose is facing the compressor?
How did you wire it I have 93 obs I want to switch from r4 style to the same one you have but I can’t find anything on how to wire it to melé it work
I still have not wired it up
Yo anybody got the wiring figured out. I think it's just from the ac control to the ac switch to the compressor but I'm not sure
No one answers that question. Lol
You have a part number for that dirty dingo kit?
Go to the dirty dingo website. it's the street rod kit
How much will you charge me to do this to my truck I have a 96 c1500 it has the same set up you have
Can we get some links to the music you used in this please, i kinda like it.
Not sure on the name is from youtube studio
Where do you get that kit at
Dirty dingo street rod kit
hi there mister ✋
i wanted asked you is the ls ecu control the ac system?
I just install the compressor and charger the ac but never wired it up.
@@boostedonabudget9018
awww :c
Did u buy a new dryer and condenser? Id so where did u get them? And since you hooked it up is it cooling good?
No used the same on i just by pass everything amd it does cool.
Can you tell me what air intake tube you are using?
I actually made it
Can u tell me how much fluit you put inside the system
Cant remember but i think i did the same amount it call for from factory and it work fine
Si tengo bomba de agua de trocka y de poleas y damper de trocka también jala ese kit ? Si se alinea la banda con las poleas?
Si
Si
Hey bro do you mind if you can post the link in the description of the exact bracket you got thanks man
Ill put the link today
Just added the link in the description
544.99 😬
What is the AC part number for kit you used
I just added the link to that kit in The video description
Did it came with the hoses??
no i had them made.
@@boostedonabudget9018 where can I get them made? Mine didn’t come with the hoses.
i got them made in a place call hose fast in garland tx.
Any info on the wiring. Have the same setup on same yr truck.
i have not mess with the wiring i currently charging the frame lol
Yo what hoses did you use and the parts can you give us part numbers
The hoses i got them made a place called hose fast in garland tx. They dont have part #
Bro how u gonna charge that system..love the video but there's no low pressure port to charge and vacuum the line
High side only no need for low side
What state and city and what store did u get your hoses done at? Do they do stainless?
Hose fast in garland tx
Are you going to wrap hose or headers ? The heat looks like it will eat that hose
It’s been fine so far but I need to get that hose made longer
Hey man you got a link to all the items you used Im trying to get the same things ?
Will send them to you
Just added the link to the description
What serpentine belt do you have ? And also are you running an ls1 water pump with the spacers or without ?
i don't remember the exact size or part #. the water pump is the ls3 from a camaro and no spacers
Como pides los fittings qué van al compresor?
Llo fui a un lugar donde asen mangera nose esactamenta las medidas
I’m in Dallas Texas how much this looks like desoto
hahhha dammm right
what serpentine belt did you use, part number? and what are the Dimensions?
don't now the actual part # but i just measure with a flat tape measure.
@@boostedonabudget9018 thanks for the response !
@@jimmyalvarado5385 ill measure it tomorrow
@@boostedonabudget9018 sounds good
@@jimmyalvarado5385 do you have ig so i can send a picture or the belt
U have the link for the compressor
www.dirtydingo.com/shop/mobile_product_info.php?cpath=377&products_id=1749
I have a 1983 with no ac is there a way I can get ac ls ?
it can be done but will not be easy or cheap.
Can yu help me ?
@@boostedonabudget9018 can you help me
@@therealdjbaldhead_mixtapes8522 can't even finished mine. does the dash have ac vents or heating
@@boostedonabudget9018 it has defrost and heat and no dash Vents
What belt did you use ?
i measured and went to O'Reilly don't know the part #
What headers are you running?
the came off a 2012 sierra but had to hammer them.
AC yang bagus 😁
What intake are u running
2012
What cold air
@@laloguillen6109 i made it lol
Gotta love home depot, it's like a second home for the hard workin folks
best place to get those drip pans
How did you wire it ?
i haven't I'm changing the frame
It says (out of stuck )
Instead of removing the water pump I would have slotted the hole
Which headers are you running ?
got them from a 07 and up but do not recommend had to hammer them in 2 spots. got them free so it did no matter to me.
@@boostedonabudget9018 07 Truck?
@@Keeterbob yes silverado
Thanks. Are the long or short?
@@Keeterbob longtube