Warning on the Free Trial!! The trial starts as soon as you install the Talk app, not when you've set up the Talk app. So, don't install it until you're ready to set it up.
hey man .. you helped me out once in the past so i thought i'd give it a shot a second time, i have a small problem, my home network work perfect on the UDM PRO with the AGG PRO as the Core Switch on 4096 STP folowed by 3 USW Aggregation 10 Gb switches on 8192 (for separate buildings) and an USW 16 PoE on 12288 STP priority fiber plugged directly into the core switch .. no loops, no problems with the STP .. the problem is like this : i have an A3 air sensor from uRADmonitor with an rj45 port that i connect to the USW 16 PoE in a non PoE port and for some reason the STP disables the port even if i disable the STP on that specific port .. i have tested the A3 on another switch (non Ubiquity, unmanaged) and it works fine .. it only happends in the Ubiquity switch .. it drives me nuts, i have disabled wireless meshing, tried restarting, tried diferent ports, sometimes the block goes away and after some time it comes back .. i tought i ask you maybe you ran into this before somewhere ..
Thanks ! Excellent video ! You know if in Europe, the UniFi talk have the same features you show to us? Or we have many limitations? I believe it's only possible to use with 3rd party voip provider. Thanks for your help. 👊
Thanks Cody. Didn't realise you could remotely adopt a phone via QR code, that's going to come in very handy. Not everything relevant here in the UK, no SMS option that I can see.
New to Unifi Talk here - I appreciate your video as it filled in a few blanks that I hadn't figured out on my own yet. Question though - playing with it I notice that it seems that a user cannot be assigned to more than one device, am I missing something? In my deployment I have more devices than actual users and am about to go creating dummy users for each device and that seems like it shouldn't be necessary... Note that with a 3rd party phone I'm using, each line on the phone is coming in as a distinct device which is making this even worse. Any thoughts/suggestions?
I know you can see your protect cameras from the phone. But if someone rings say a G4 doorbell or the G2 reader, can it ring to the phone so you can see who it is and let them in?
Have you had the issue with the Softphone where outgoing audio is dropped (I.e the other person can’t hear you when on the Softphone) if you roam from access point to access point or cell tower to cell tower? I love the Softphone but it is incredibly annoying. Basically audio becomes one way where they can’t hear me but I can hear them until I put them on hold and then back off hold. It’s the only thing keeping me from deploying the softphones everywhere.
I'm using UniFi Talk in Germany since about one week. It seems to have potential, while it lacks some basic features. 1. It doesn't support the hd voice audio codec G.722, so all calls sound like in the 70s 2. It's not possible to disable voicemail for one incoming extension. I have a Video SIP door station on extension 0003, which calls 0001. Folks on my door also get the voice mail prompt. It's not possible to set a ring flow for the door station extension, when no external phone number is assigned. If I'd assign on, people could call my door station. Any workarounds or hints?
Do you know if it will be possible to buy licenses for the mobile application independently of having to buy a pro plan package? I'd like to be able to buy licenses according to my customers' needs and not have to buy a new number for every 5 mobile licenses needed.
Is it though? I’m looking at switching from Nextiva paying 200/mo and think I can get that down to 10/mo with Unifi. Or what are you comparing too, curious?
Tip: if you don’t need it turn off advanced call routing. It adds a 5 second delay to calls.
Great tip
Warning on the Free Trial!! The trial starts as soon as you install the Talk app, not when you've set up the Talk app. So, don't install it until you're ready to set it up.
Interesting. Can we do it without the subscription using a third party phone and SIP trunk?
heck yeah, I was waiting for this for a long time. Kudos Cody
hey man .. you helped me out once in the past so i thought i'd give it a shot a second time, i have a small problem, my home network work perfect on the UDM PRO with the AGG PRO as the Core Switch on 4096 STP folowed by 3 USW Aggregation 10 Gb switches on 8192 (for separate buildings) and an USW 16 PoE on 12288 STP priority fiber plugged directly into the core switch .. no loops, no problems with the STP .. the problem is like this : i have an A3 air sensor from uRADmonitor with an rj45 port that i connect to the USW 16 PoE in a non PoE port and for some reason the STP disables the port even if i disable the STP on that specific port .. i have tested the A3 on another switch (non Ubiquity, unmanaged) and it works fine .. it only happends in the Ubiquity switch .. it drives me nuts, i have disabled wireless meshing, tried restarting, tried diferent ports, sometimes the block goes away and after some time it comes back .. i tought i ask you maybe you ran into this before somewhere ..
Best video so far. Still waiting on a few features but it’s getting there.
Yes thanks Cody as usual well explained and easy to follow.
Excellent video and perfect timing. If someone calls one phone and there's no answer, can Unifi Talk auto-forward the call to other Unifi talk phones?
Thanks ! Excellent video ! You know if in Europe, the UniFi talk have the same features you show to us? Or we have many limitations? I believe it's only possible to use with 3rd party voip provider. Thanks for your help. 👊
I would like to see more on 3rd party setup. I would also like to see comparisons on sip providers.
Thanks Cody. Didn't realise you could remotely adopt a phone via QR code, that's going to come in very handy.
Not everything relevant here in the UK, no SMS option that I can see.
Ya somethings may not be available in different regions . I don’t use sms a lot just for emergencies
New to Unifi Talk here - I appreciate your video as it filled in a few blanks that I hadn't figured out on my own yet. Question though - playing with it I notice that it seems that a user cannot be assigned to more than one device, am I missing something? In my deployment I have more devices than actual users and am about to go creating dummy users for each device and that seems like it shouldn't be necessary... Note that with a 3rd party phone I'm using, each line on the phone is coming in as a distinct device which is making this even worse. Any thoughts/suggestions?
Excellent video detailing each step.
Great video. Do you know if one can port an existing 1800 number over to Unifi Talk?
That grandstream, do you need a new number or can you just add it to the group to the same number?
Great job Cody 👍
For the Softphone setting I had multiple screens to click before I received the screen you showed.
Nice finally UniFi talk
I know you can see your protect cameras from the phone. But if someone rings say a G4 doorbell or the G2 reader, can it ring to the phone so you can see who it is and let them in?
Does Talk support the G.722 codec when using a third party provider?
Can you call extension to extension with phones at different sites that are connected to different cloud gateways?
@@joshlarsen3260 yup you can if they are in the Unifi talk application.
I show near the end how to add remote phones using Unifi teleport
Have you had the issue with the Softphone where outgoing audio is dropped (I.e the other person can’t hear you when on the Softphone) if you roam from access point to access point or cell tower to cell tower? I love the Softphone but it is incredibly annoying. Basically audio becomes one way where they can’t hear me but I can hear them until I put them on hold and then back off hold. It’s the only thing keeping me from deploying the softphones everywhere.
Do you have to buy their plan? Can you use just a third party sip.
You can use a third party sip you don’t need to buy the Ubiquiti sip trunk
@@MactelecomNetworks Thanks, but you do need at least 1 of their phones to last startup, correct?
@@backupaddict1356 Yes, but only for initial setup. Afterwards, it's up to you, if you keep it.
I'm using UniFi Talk in Germany since about one week. It seems to have potential, while it lacks some basic features.
1. It doesn't support the hd voice audio codec G.722, so all calls sound like in the 70s
2. It's not possible to disable voicemail for one incoming extension. I have a Video SIP door station on extension 0003, which calls 0001. Folks on my door also get the voice mail prompt.
It's not possible to set a ring flow for the door station extension, when no external phone number is assigned. If I'd assign on, people could call my door station.
Any workarounds or hints?
Cody, you did not mention the Cloud Gateway Max as a compatible controller, works fine and has up to 2TB of NVMe SSD.
Yup I missed that but would work perfectly fine
@@MactelecomNetworks you did mention the cloud gateway max when listing compatible controllers! John must have missed it
Do you know if it will be possible to buy licenses for the mobile application independently of having to buy a pro plan package? I'd like to be able to buy licenses according to my customers' needs and not have to buy a new number for every 5 mobile licenses needed.
We have the same need!
i swear on mocha this video is good
@@cbett4431 😆 I hope so
Do I have to buy a Unifi Phone or can I just use my third party phones?
@@shaynetaylor1720 as of right now yes you do
You need to have a UniFi phone connected for setup. I could remove that after initial setup, using only 3rd party phones.
VOIP has become SUPER competitive. Unbiquiti's prices a very high compared to others in the market. They need to become more competitive.
Is it though? I’m looking at switching from Nextiva paying 200/mo and think I can get that down to 10/mo with Unifi. Or what are you comparing too, curious?
NEVER RESPOND TO EMAILS 😢
Please text my phone number on my website with your email