Respect. All that and quality video too, in the cold, on the ground. Well done. If you hold a lump hammer against one side of the while you hit the opposite side with a hammer (or clap them them with two hammers) usually the ball joint will pop. Especially if you can add a long bar and weight suspended off the end keeping a little tension.
You might find one of those USB endoscopes useful, Rob. They're cheapish on Amazon these days. It's a little fibre optic camera on a cable with a built in light that you plug into a phone - allows you to see tight dark spaces. Might be helpful for showing the YT audience things too :)
Stumbled on this channel by chance watching loft conversions from my home in Australia lol. I like watching rebuild channels when people work hard and do things properly which is hard to find these days. The attention to detail like masking off people’s homes to prevent mess. Also like how you pack good progress into the uploads. Keep up the good work you’ll get a lot more subscribers before long.
Merry Christmas 🎄 Rob. Top job, you will have a rust free hummer when it's sorted, never mind it looking fab. Deffo treat yourself to a few rachet spanners for the rebuild. Last time I worked on a car, don't think impact drivers were invented LOL. Makes it much faster. Use plenty of wax on the rebuild on bolts and those bits you just can't paint. Look forward to the next one.
My mate Trev owns Hummer Hearse UK. It's a one off, beast of a motor and definitely the way to go! Well worth an admire Cheers Rob, I hope you had a great Christmas.
Wow mate you struggled with the brakes and hubs now your rebuilding it good luck and fair play for doing it the control arms there will be a slot at the back where the pinch bolt went through use a chisel or large screwdriver to hammer in to the slot to separate them or hit it where it goes through that's the best way to separate them thanks for the video mate and good luck
Hey Rob hope you had a good Christmas, keep up the videos love watching them. Good luck on the hummer hopefully it will be easier then changing them brakes over 🤣🤣 (other then your dentist visit)
hey rob hope you had a great Christmas I've emailed dpd and they have said it was left with mia ? ill look in to it hope it did come to you all the best ... Dan
Hi Rob, buy a Ball Joint Splitter, very cheap and they pop the joints in seconds. www.machinemart.co.uk/p/draper-n160-expert-2-stage-ball-joint-separato/
Full re build, I mentioned it in another video New suspension new brakes lift kit, full paint job, powder coating, new bumpers, new lighting all round, new tints
Respect. All that and quality video too, in the cold, on the ground. Well done. If you hold a lump hammer against one side of the while you hit the opposite side with a hammer (or clap them them with two hammers) usually the ball joint will pop. Especially if you can add a long bar and weight suspended off the end keeping a little tension.
Thanks bud
You might find one of those USB endoscopes useful, Rob. They're cheapish on Amazon these days. It's a little fibre optic camera on a cable with a built in light that you plug into a phone - allows you to see tight dark spaces. Might be helpful for showing the YT audience things too :)
Good idea pal thanks
Stumbled on this channel by chance watching loft conversions from my home in Australia lol. I like watching rebuild channels when people work hard and do things properly which is hard to find these days. The attention to detail like masking off people’s homes to prevent mess. Also like how you pack good progress into the uploads. Keep up the good work you’ll get a lot more subscribers before long.
Thank you Jason
Merry Christmas 🎄 Rob. Top job, you will have a rust free hummer when it's sorted, never mind it looking fab. Deffo treat yourself to a few rachet spanners for the rebuild. Last time I worked on a car, don't think impact drivers were invented LOL. Makes it much faster. Use plenty of wax on the rebuild on bolts and those bits you just can't paint. Look forward to the next one.
Thanks bud
Sweet Ride. Gonna be awesome!! You the man!
Thank you
My mate Trev owns Hummer Hearse UK. It's a one off, beast of a motor and definitely the way to go! Well worth an admire
Cheers Rob, I hope you had a great Christmas.
Thanks mate 👍
Wow mate you struggled with the brakes and hubs now your rebuilding it good luck and fair play for doing it the control arms there will be a slot at the back where the pinch bolt went through use a chisel or large screwdriver to hammer in to the slot to separate them or hit it where it goes through that's the best way to separate them thanks for the video mate and good luck
Thanks for advice Russell
So strange to see u build something different to a loft lol
Interesting ...not a loft ..👍😁
Great stuff, no messing about 👍
Nice rob you doin well brother a no its not h2 but ive 1987 mini that i started takin apart few years ago watchin u makin want to get it back on road
Get to work on it bud 👍
Hey Rob hope you had a good Christmas, keep up the videos love watching them. Good luck on the hummer hopefully it will be easier then changing them brakes over 🤣🤣 (other then your dentist visit)
Thanks bud
Control arm are a nightmare. A bit if heat and decent hammer. Works every time.
Yep heat that bad boy up and it’ll pop right out!👍
Thanks pal
u and Keith Lemon should do a video!
hey rob hope you had a great Christmas I've emailed dpd and they have said it was left with mia ? ill look in to it hope it did come to you all the best ...
Dan
Thanks Dan all the best
Omg im not use to seeing her like that! Please hurry up and put her back together 🤣🤣
How ankered the framework as there gale force winds on the way just saying 🤔 looking forward to seeing the work you do
It’s screwed well down ain’t going no where
AHH you thought of it ok
How's it held up to the snow?
Lovely job Rob. Are you a Mechanic by trade, or is this just a hobby?
Hi Brian. It’s just a hobby I’ve never done this work before
@@builditwithrob Well, i couldn't tell mate. I'm looking forward to watching all Hummer Build videos. All the best for 2021
Lovely build..........did you buy it as a non runner ?
Hello I’ve owned it 3 years now just decided I wanted to rebuild it bigger better
Do you want to sell that conduit bender?
I don’t sell tools keep for life lol 😂
Hey where did you get this marquee from ?
I purchased on eBay I will leave like below
www.ebay.co.uk/itm/283832947050
@@builditwithrob Thank you Rob and what is the quality like ?. I love your channel by the way, it’s great.
@@danieltricker2780 it’s been up 3 weeks now had no issues at all, wind snow ice it’s been great, thank you
@@builditwithrob awww great. Thank you Rob. Just one last thing. How long did it take to be delivered from Germany ?
@@danieltricker2780 about 5 days it was pretty quick
Awesome video. Keep it up 👍🏻
Also quick question. What engine is in this H2? Are parts cheap in the Uk?
Thanks bud, 6.5 litre v8 parts are not readily available in uk I get my stuff brought in by parts USA
Hi Rob, buy a Ball Joint Splitter, very cheap and they pop the joints in seconds. www.machinemart.co.uk/p/draper-n160-expert-2-stage-ball-joint-separato/
Cheers
You never told us what you're actually doing to the car.
Full re build, I mentioned it in another video
New suspension new brakes lift kit, full paint job, powder coating, new bumpers, new lighting all round, new tints