CPU
Вставка
- Опубліковано 24 кві 2023
- Mediatek cpu reballing
Hello, dear friends, I am posting tutorials in this channel that I hope will be useful for everyone, it is about mobile repairs and Electronic circuit
help you to get acquainted with electronic repair tools
Also, how to change electronic parts using heat gun and soldering iron.
If you are interested in this topic, please follow us and subscribe my channel
These are our ways of communication
Gmail
techshow1374@gmail.com
Telegram
t.me/techshowmobile1374
Twitter
/ techshowmobile
Website
techshowmobile.top
#mobilerepairing #mobile #mediatek #cpu #sircuit #electronic
I love this channel.
😭😭😭
Lol
What was the point of what he did?
@@yhgamiel21 its called cpu reballing I think, Look it up.
@@aleclaja9917 Cool
Humanity’s last chip repair man
Literally
I'm still here doing it since 2011. Never made any vids. Wish I did.
@@porsp You should bro. ❤
@@solomondees.4632 haha maybe I will. I remember searching for iphone 3G repair vids and there were only a couple. Some were even fake.
I hope there will be more technology repairing channels and shops
feels like the last cpu getting ready for the one last fight
yes 😁
Терминатор собирается
that hit me hard.
Mission log Phobos base - Day 187: The oxygen generator has stopped working again, narrowed down the issue to the CPU board in the Modular Electronics Controller Unit this time. I used my only spare a week ago on the main power bus unit after that one got fried by an electrical short following the crash. The same incident also took out the orbital relay dish as previously mentioned. Attempts to reestablish satellite uplink today using the short range transmitters has been unfruitful, it was a long shot I suppose, but worth a try. In regards to the O2 generator issue, there is a another unit with a compatible board in the rover which I can see lying on its side some distance from the Eastern viewport, it seems mostly intact from here however I am unable to reach it as the environment suits are kept in hab 3 and the connecting tunnels from hab 1-2 and 1-3 were destroyed when the supply ship's propellant and oxidizer tanks went up, I am completely isolated here. I can see fragmentation damage to both other habs from here and they appear to have both depressurized. Mission Commander Hamilton, Mission Specialist Williams and Mission Specialist Wehrner... are presumed deceased at this point. Will try cleaning the board and connectors for the generator in hopes of restoring functionality, If the unit is still nonfunctional after this I calculate there is enough left in the reserve tanks for maybe a week. If anyone recovers these logs sometime in the future, let my family know. Tell my wife and kids that I am sorry and... I tried.
Wow! It gives off such a cool atmosphere!@@extremepredudice
For those that don’t understand what is happening, this man is removing something and then putting something else back on.
thanks for info 🌹
Why? What's the diff between the old and new ARM?
Why not just turn it off and on again?
🤯
@@herrbonk3635 The new one is not broken.
Under this music, even soldering the processor will look sad
Song name ?
@@dailytechytchannel7 snowfall
@@rayvhendmanalip2108 thanks
@@noneofbusiness9764 øneheart x reidenshi - snowfall
@@dailytechytchannel7 snowfall
I’ve never felt so much emotion wile someone cleans a cpu
Now you see.😊
Wkwkwkwk😂
Goodbye old cpu, your job will never be forgotten
🌹 🌹 🌹
this is the same processor. The repairer just rebolled it
Same CPU dude, just did a BGA resolder.
The music is exactly what it sounds like every Monday morning
yes 😊
The MT6572. A very good processor. I remember it with love
Made in taiwan
10 000 antyty для 2013 норм
MT6737 i use in Karbonn titanium jumbo...
good phone at 6K...🔥👍
Nope
idk I would say its fuckin useless
Im sorry for your loss, my condolences.🙏
thank you
😭😭😭
@@techshowmobilerip chip 2015-2024
(It was in a nexus 5x)
He is going to fight losing battel with quantum chips
exactly 😁
And people say that humans today couldn’t build the pyramids, or that humans today can’t build the amazing gothic architecture of the past. The amount of detailed that needs to be put together for a cpu to function is incredible. Not to mention all the other components of a device and how to fit them all in the palm of your hand.
yes you are right 👍 👍👍
music definitely got to you on this one huh, lol
I assume you're one of my team mates crying about lag as an excuse to their 0-15 stats, if you're able to find similarities between CPUs and bricks
No one is saying that humans today couldn't build the pyramids, we totally could. However if you took away all our machines and tools and left us with only the tools that they were supposed to have back then (according to current accepted history), then we couldn't even come close to building them. That's the paradox people talk about. All the accuracy and precision needed that you just can't get with the basic tools they are supposed to have.
and that is why history is so so wrong@@Psi105
For those didn't know: This is replacing a faulty chip with a good one.
👍🌹
Fascinating.
For those who didn't know: this guy posts videos of bees eating geckos.
oh is it? we thought it was a sandwich getting grilled 😂🤣
@@sanjay7pisces i also thoughg so😂😂😂
Installing malicious chips on people's computers during transit 😂
😁🌹
This cpu rebolling and the sound hits different, it’s will be the nostalgic 🥹😢
😊🌹
The cpu is really having serious medical treatment 😢
🙂
Hope he gets well 😭
Yeah, it's basically a brain transplant
@@erenyayger3840mentally disabled people : how dare you to assume it's gender 😡😡😡
Flux helps the heat spread easily on the board and also protects them from heat ,Another function of flux is this
@@shaunkeith4087you know nothing about board level soldering
@@shaunkeith4087 Actually it does. Its like in cooking how oil helps distribute heat more evenly.
What type of flux is that? The regular orange brownish stuff dries out too quick
Name of music track please 🙏🙏🙏
Snowfall
@@YOBAMUSTDIE
Ah yes. Let’s put the flux on the chip housing. Works better than underneath
yes you are right 👍
@@techshowmobile😂
It seeps in under the chip anyways.
that's a cool re-balling stencil you got there
👍🌹
I love repairable devices. I love the people who've got patience and the skills to repair them. ❤
Plus it's so satisfying to watch
@@karthikc07 Absolutely. One of my main sources of entertainment. I got into this whole thing because of TronicsFix.
You'll love Louis Rossman UA-cam channel then
@@sourabhshete1994 Been a fan of him for years.
This video literally saved my marriage. Thank you!
Glad it helped!
💀
how?
how bro how it saved you.
the real question is how bro got that many likes on his comment
I love mediatek. We need more repair people like you because almost everyone I know throws their devices in trash if it’s broken.
thanks for watching 🌹 🌹 🌹
@@techshowmobile thanks for doing board level repairs!
To me this is symbolic of the evolution of tech and the abstraction from humanity.
What started as something you could switch out with bare hands, has turned into something that requires accurate soldering, and soon will result in far more complex technology
you are right 👍
MT6572 processor made me feel so nostalgic. I used to have some Android 4.0 devices that time with this chipset.
Все так плавно и быстро. А я при попытке сменить конденсатор разбил материнскую плату пк😂
hahaha
@@techshowmobile father allways told me with patience you achieve anything
Because the have microscope bro . We dont
Sometime me too 🤣🤣🤣🤣
@@techshowmobile how do i learn this
Casually swaps a CPU like it's an audio chip on a normal sized motherboard
I just love how these smartphone processors look
thanks for watching 🌹
If that board worked after the manual chip replacement that's either impressive skill, luck or a bit of both. I'll use a rework robot and get it right first time, every time, though.
thanks for info
CPU: (sadly) Mom, why am I getting detached from you? What did I do wrong?
Motherboard: Oh my dear CPU, it's not that you've done anything wrong. It's just time for some cleaning and maintenance.
CPU: But mom, I feel so connected to you. Being detached feels like we're being torn apart.
Motherboard: I understand how you feel, my little one. We've been together for so long, working as a team. But this is necessary to keep us both running smoothly.
CPU: Will you miss me while I'm away?
Motherboard: Of course! You are an essential part of me. But don't worry; it won't be for long. We'll be reunited soon enough.
CPU: Promise?
Motherboard: Promise! Once we're cleaned and refreshed, we'll work even better together than before.
CPU: Alright then...I trust you, mom.
Motherboard: That's the spirit! Just think of it as a little break for both of us. We'll come back stronger and ready to tackle any task that comes our way!
CPU: Okay...I guess I can handle it if it means we'll be better in the end.
Motherboard: That's my brave little CPU! Now let's get this cleaning started so we can reunite soon.
I am motherboard 🙄
I cried :(
Это шыдевр!
When you know the fact that they will never get back together, you feel depressed
Personifying SMT devices that emote. Wonderful example of what AI is capable of generating- even as of now with what it is. Truly remarkable.
It's a ball grid array processor set up. Typically found in laptops they are CPUs that are just soldered right into the motherboard itself saves space downfall is you need to know how to do this if you wish to upgrade or replace the chip. Awesome video! ♥️♥️
yes you are right 👍
thanks for watching 🌹
the most complex part is to solder it down coz you need to place a chip very accurate
yes
When you have that one terabyte of homework and have to delete the evidence from existence before sending it to repairs
🙄😶
"homework"
As a non pc guy, this hurt me, but in reality there was probably nothing wrong with it 😂
not really a big deal, but he was pretty greedy with the flux
This is indeed a certified CPU moment
👍😊
The only things looking broken was that 2 chips underneath with the black plastic falling off them that are to the right of the bottom left chip
yes you are right 👍
i can't believe you could show me this without any warning... I'm crying rn 😭😭😭 i already miss him 😭
😭😭😭
Ok this channel is the only channel that replies to everybody
Good attitude bruv❤
ok😢
@@TutorialAndroidService why are you sad know
I wanna do this kind of stuff sooooo bad! 😭 It looks like soooo much fun.
Sure. Do it. 😊🌹
There is a lot of skill to perform the work done 👌
Was going to say the same. Too much solder and you're screwed. Too much blowing the heatgun and the chip goes flying, ...
Я понял, что не умею паять, когда раскаленное олово начало падать мне на ноги, ты крут)))
Учись и оно небудет падать толька держатся на конце паяльника.😅
Я другу на носок большую каплю олова случайно скинул однажды) Это было очень смешно)
@@cargo.zam.a а разве оно не застынет, пока долетит до ноги?
@@kikabust2191 будет очень больно. Застынет на коже
@@zaurchannel4657 ого
This looks clean , good job man 👍
Самый печальный ребол, что я наблюдал. Нанесение пасты - я зубами скрипел. Если это не отвал из-за разного размера шаров, то удача максимальная
thanks for watching 🌹 🌹 🌹
И раздербаненые катушки ещё.
Блин, а я вот вообще например никогда не понимал, почему шары находящиеся так близко друг к другу и не спаиваются и не замыкаются, так как иногда чип кладут не идеально контакт к контакту когда припаивают, может я тупой, хотя сам паять умею, но не чипы
@@titanraw поверхностное натяжение + текучесть
поставил на паузу и полез в комменты, на моменте нанесения флюса на верх чипа!
upd: а вот вижу, склейка кадра, оказывается флюс на чипе не помогает отпаять его, смотрим дальше =)
upd2: посадочное под чип очищено как попало.
upd3: если я правильно рассмотрел, то старые шары с чипа не снимались, и это пздц, про посадку я ваще молчу, где то во время посадки случился факап, и кадр опять склеили как в случае с флюсом в начале.
Короче в видосе всё прекрасно xD
Ah, yes, OverheatingTek, no wonder it needs replacement 😅
🫣😁
Да, это гениально наносить флюс сверху проца, а не по периметру)
А что не так? Я не пробовал такого, но полагаю, что расплавляясь на корпусе, флюс затекает под него и никуда более. А если нанести по периметру, то потоком воздуха его разгонит по всей плате
@@ValmerKill Вообще то он здесь тоже разогнался за пределы кадра
@@master-user потому что многовато навалил
@@techshowmobile 👍👍👍👍👍😐👍👍👍👍👍👍
@@master-userа как ты думал естествено разогнал это флюс
I always wonder how they knew exactly where the solder wpoints were. That stencil is slick.
flus help that
Loved seeing missed solder balls in that template.....
Glad you liked it!
The saddest CPU video
The saddest CPU video 😢
sorry 🫤
I wonder what kind of equipments you need to do this kind of operations. I would like to have some tutorials on where to start with the equipment, how to maintain the material, beginner tips, etc.
Visit only a training center or a mobile repair worker
@@techshowmobile yeah, only issue is i don't live near a big city which possess something alike. i live in the north of Canada, self learning stuff like this is my best shot.
@@joel14roy Best Way to Watch UA-cam Videos
Bro that thing was a floppy gooey blob at the end. Still better than I can do though.
thanks for watching 🌹
you are best 😊
최근 본 영상중 가장 감동적입니다. 😢
🙄
Seu canal e D+! Parabéns pelo ótimo trabalho! 👍🏻
🌹
Пока впаявал, остальные отошли😂😂😂
😊🌹
Bro is amazing in this work
Showing Arm some love!
🌹
Все довольно неплохо сделано, отличная работа.
🌹
"Dont forget to brush your teeth" "okay, motherboard"
you are right 👍 😊
Он намного "точен" чем роботы на конвеере сборки платы
😁👍🌹
Never, EVER drag solder wick across pads like that. That's how you lift traces and destroy pads. You need to dab the wick.
ok 🫡
aaa me hizo sacar unas lagrimas de nostalgia extraño ese trabajo :)
Yo igual, trabajaba reparando en un centro autorizado de Sony en Perú, extraño ese trabajo, literal era lo único que me gustaba hacer
Bro was really creative with the title💀
thanks for watching 🌹
Não sei porque mais esse vídeo com essa música ficou relaxante demais, de uma paz absurda!!❤❤
thanks for watching 🌹 🌹 🌹
Ok, never thought that the _Snowfall_ would work with the IT video. Reindeshi and Oneheart made an absolute masterpiece.
Song used: _Snowfall_ by Oneheart and Reindeshi
Thanks ❤️
🌹 🌹 🌹
So we just gonna ignore the 2 copper coils below it that are beat to hell? XD
😱😱😱
So technical and crafty.. that someone as fidgety as me and with unstable hands would never be able to do even attempt doing it.
thanks for watching 🌹
It felt like the CPU was my friend and he is gone now
sorry
Informative video......❤
🌹
эх.. прям как жизнь моя.. когда сижу в 4 часа ночи, перекатываю этот ебучий Mediatek, и почему-то начинаю ловить флешбеки из прошлого, и осознавать что проебал отношения, каких у меня больше никогда не будет...
🙄🤔
Thats some beautifull skill right there! A moment of silence for all fallen boards that couldent be fixed worldwide.
Indeed!
This cpu has balls
🌹
What a great video, learned a lot of useful things from it
thanks 🌹
Pena que muitos profissionais de eletrônicos não são tão honestos..😥
hi man 🤔🌹
What's the problem
@@techshowmobile
O problema foi que levei meu celular para o conserto, ficando lá por três dias, e disse que não dava para consertar,eles depenaram o aparelho utilizando várias peças dele,me entregando só a carcaça. 😥
@@techshowmobile
The problem was that I took my cell phone for repair, staying there for three days, and they said it couldn't be fixed, they plucked the device using several parts of it, giving me just the housing. 😥
I was so confused until you started to clean
why 🙄
I would do a quick blow with compressed air to get FOB out of the soldering area before placing the chip.
Impressive man !
thanks man 🌹
pov: you lost a bet and now have to upgrade your phone cpu
👍🙃
When you remember this cpu a lot of years give him performance to play games to watch youtube to work and more and this is last hes day😢
👍👍👍
I don't even know what's going on but I'm crying
🫤
Very good job 😊
hi 🌹
I'm late for reply 🫣
thanks 🌹 🌹 🌹
Much appreciated Sir😊
Most welcome 😊
Replacing a BGA chip by hand is no easy task
👍😊
Hi good job! Im interesting to know what is the name of the this you use after you removed the chip so its clean
@@techshowmobile thank you!! 😆
CPU #shorts, I thought this was going somewhere else…
Да ты прав в жопе мира.😢
@@iljan17 hi 🙄
Most saddest and satisfying cpu cleaning ever seen on humanity.
🌹 🌹 🌹
Background music need a fast breakbeat and a matching bassline, then the chip cleaner won't have depression.
🤔🙄
try changing the chipset instead of MTK, but one equivalent to the MTK, for example Kirin / Snapdragon / Exynos. will it run.
@@techshowmobile he asking to changing the chipset on the same performance level but from other brand. Can it run
Kirin - my favorite of all the time!
Noo these different processes have different architecture
@@tigerpirate1849 And different pin out too.
As long as the pin is same, the hardest part is to reprogramming the firmware so it can connect to other chip, like IO to storage chip and rams.
hi 🌹
I'm late for reply 🫣
Unfortunately not possible
I love watching computer stuff like this. I haven't an absolute clue what I'm looking at but I know it's being restored and that's good enough for me.
it's very good 👍 🌹
He should protect the rest of components
sure
That beat always gives me goosebumps
🌹
Tell me what kind of paste do you use?
amtech flux rma-223
They won't buy a heating table for me in work. Without one the PCB will go like a banana.
🤔🤔🤔
Why am i suddenly so relaxed
😊
Because of the song.
Is it possible to replace another cpu into the old main board?
On some hardware it is, most old power pc macs with a soldered on cpu could be upgraded
hi 🌹
I'm late for reply 😬
no unfortunately
Повреждённые дросселя говорят что не стоит это ремонтировать
👍
Thanks to this short, I was able to rekindle a long lost friendship. Shout out to tyler
good 😊 🌹
Removal of the chip, then removes the ball grid array from underneath, places new balls with the help of stencil and flux paste, heats the balls into place onto chip and then onto PCB with a hot air nozzle. Hard stuff to actually do...props!
yes 👍
you are right 👍
ah yes flux on top of the ic package
Flux helps the heat spread easily on the board and also protects them from heat ,Another function of flux is this
दुःख की इस संकट घड़ी में हम आपके साथ है 😢
thanks man 😭
imagine reballing a equivalent of a welcome phone
🌹 🌹 🌹
flux on top of the chip instead of under it. Makes sense.
Flux helps the heat spread easily on the board and also protects them from heat ,Another function of flux is this
@@techshowmobilewhat flux do you use?
Отличная работа!
thanks 🌹
I'm late for reply 🫣