QUICK FIX!! Epoxy Floor Install Goes Bad (DIY repair epoxy floor)
Вставка
- Опубліковано 12 лип 2024
- In this video we show you how we repaired this epoxy floor if you have debris, tape, flies, sawdust & more fall into your floor during the epoxy installation! We show you step bye tep what we did to make it look fresh!
Get this floor kit color combo here:
leggari.com/product/epoxy-flo...
Urethane Matte Top Coat: leggari.com/product/wb-uretha...
You can order any floor kit here: leggari.com/floors/order-floo...
What this video has
0:00 Project Intro
0:28 Dropping Stuff In Epoxy
3:12 Told Needed
5:00 Sanding
10:04 Matte Urethane Top Coat
11:16 Final Look
Get Leggari Merch Here: leggari.com/store/#merch-shop
Spike Shoes: leggari.com/product/spike-shoes/
You can always purchase epoxy and metallics here👇
Primer: leggari.com/product/wb-primer/
Epoxy: leggari.com/product/metallic-...
Metallics: leggari.com/product/metallic-...
Read more info on the products here: 👇
Primer: coatings.leggari.com/view/137...
Epoxy: coatings.leggari.com/view/952...
Metallics: coatings.leggari.com/view/266...
Floor Kits: coatings.leggari.com/view/364...
Leggari Floor Kits were designed to transform your floors into something new and unique by coating your existing concrete, tile, or wood flooring. Floor Kits are fun and easy to install. You can have a designer floor that will last for decades in 2 days with our unique floor kits, custom made to your projects square footage.
Learn about the floor installation process here:
PREPPING THE SUBSTRATE OR SURFACE
One of the best ways to prep your surface is diamond grinding. You can rent concrete grinders at most rental stores. The next best way is using an etching chemical to etch the surface of the concrete. You can also sand the surface if the before mentioned methods can’t be done. If you can only prep minimally or can’t prep at all we have a Prep Replacement Primer to help achieve a strong bond. We always recommend prepping the concrete surface first.
PRIMING THE SUBSTRATE OR SURFACE
Priming the floor is simple and fast. Mix your pre-measured primer then dip and roll the pigmented primer across the surface until the floor is completely pigmented. Wait 1 hr (or until tacky and not coming off to the touch) and start applying the Base Coat.
METALLIC EPOXY COAT
Applying the Base Coat and Highlights is the funnest part. Mix your pre-measured Base Coat, pour it out across the floor and begin to spread out the epoxy with your rubber squeegee getting it as even as you can. Our Epoxy self-levels so don’t worry about getting it perfectly even. Quickly roll over the surface with your paint roller to help even out the epoxy. Now mix your pre-measured highlight color and apply it to the base color, then blend it to your desired look.
HIGH WEAR TOP COAT
We offer 2 different gloss sheens in our Urethane Top Coat. The Top Coat comes with the option to have a High Gloss or a Matte Finish. It needs to be rolled out super thin and leaves a minor texture which gives it the extra durability. Apply it within 24 hrs of installing your floor kit or you will need to sand the surface before applying it.
**APPLICATION DETAILS ARE ADDRESSED IN OUR TUTORIAL VIDEOS
About Us:
Leggari is a coating based channel (metallic epoxy & concrete overlay) that will show you how you can use our products as amazing DIY projects to transform your existing surfaces! You can renovate things like kitchens, bathrooms, basements, patios & more! With Leggari you can renovate in no time, imitating real stone or creating a designer concrete look!
You can watch hundreds of videos that show you the step by step process of resurfacing your existing surfaces!
- Tim Krumland and Tylor Svangren, Leggari Founders
#leggari #epoxyfloor #epoxyflooring
FIND US ON SOCIAL MEDIA
Our Social Media is filled with projects done by customers around the world and we also give sneak peeks of projects we're working on, stay up to date and follow us!
Instagram: / leggari
Facebook: / leggari
Pinterest: / leggari
Twitter: / leggari - Навчання та стиль
Guys you are really the best when it comes on to epoxy tutorials thanks a million
Our pleasure!
You guys are amazing! I have have been to two certifications classes. 1 in Fl and 1 in IL. I have learned way more just by watching your videos. Thank you.
That is amazing to hear! Thank you. If you are interested in our academy, we will be launching very soon and you can register here! 👉 leggariacademy.com
Muito bonito esse trabalho, uma obra de arte.!!!
Obrigado por assistir!
Very usefull video
Thanks guys 👍👍
Glad you liked it!
👍 Ребята Вы молодцы!
Большое спасибо!
Great video
Thank you for watching! Check out this video demonstrating the durability of our countertop kits! 👉 ua-cam.com/video/npzH_hKmUG4/v-deo.html
Love your guys stuff! Definitely professional applicators on your crew! Do you have epoxy that can be shower walls?
We have people coat panels horizontally and then install them in place in the shower!
@@LeggariProducts how to join the seams?
@@LeggariProducts Do you have videos on how that is done? Including how the seams would be joined? Thanks!
Would the repairs look the same with high gloss top coat?
Would you guys do an example that compares the matte and glossy topcoats side by side to show how each changes the look of the floors?
Great idea!
Good very very nice..👍👍
Many many thanks
Hello friends, greetings from Venezuela. I have a question, yesterday I finished applying epoxy resin to a concrete counter, but today about 2 bubbles appeared on one main edge. Should I sand to eliminate those bubbles and very delicately and subtly inside the hole that will remain, I apply epoxy resin again??? It would be perfect. Or should I apply a full coat to the countertop? Please help...thanks in advance..
amazing
Muito essencial para um ambiente.
Concordamos com você, obrigado por assistir!
I have a question do yall experince aid pockets
Could you do the same thing if you have some spots that are cured all the way and some spots that are not?
NO, if you have soft and sticky spots there is a chance the epoxy was not mixed all the way and could never get hard, so you would have to remove it and recoat!
I would like to use this floor kit on a kitchen counter top. Is this possible? What other things do I need to buy?
Yes, of course Email customerservice@leggari.com They will be able to help you order this kit for your countertop!
What about Pin Holes in the Epoxy Basecoag when it’s dry? How do you repair that?
Hello it’s been a year since I used your product to do my kitchen counter. I need to know how to fix these. Little dried up holes in the epoxy and a burnt spot, then small chips on the edges of counter. How do I fix these problems. Thanks 😊
Email customerservice@leggari.com They will be able to help you with your questions, and walk you threw the steps to fix the issues!
@@LeggariProducts Thanks so very much..
Great video. Where are you guys located?
We are located in Pasco, WA but ship internationally and offer an in-depth online training. Check it out here! leggariacademy.com
So you can't just do the spots? You have to do the entire floor or area? We had just a couple spots......bug and just weird small spots. Can I just sand those small spots and use the JB weld epoxy kit with the same resin powder?
Hello! Feel free to contact our customer service with your questions regarding our products at customerservice@leggari.com or 1-844-LEGGARI (534-4274). Best of luck to you!
What is the process to fix the WB Polyurethene topcoat if it dried with some streaks and blotches? Just got done with a floor kit and used a gloss WB with grit additive. Its a little cloudy and we want to give it that shine as the final result!
It would need sanded and re-applied. If it's cloudy it was applied too thick. The grit additive will dull the sheen a bit but it does add extra scratch resistance.
I thought so. Could you give me a few tips on the sanding method? Tips to reapply it? How long does the Topcoat last in the bucket and could I add more water too it after its been mixed and sits? Really appreciate the quick repsonse here!
@@LeggariProducts
When is your next training class available ? I'm very interested. !!
Unfortunately, we no longer offer in person training due to covid, so we have switched gears and our Leggari Online Academy will be available soon!
@@LeggariProducts awesome I can't wait let me know ASAP
How long after the epoxy can you start sanding?
Next normally but depends on factors like temperature .. Humidity.. Brand.. Sometimes it is still sticky next day
First time I used one of those sanders back in the day I blasted a hole in the wall.
Oh no, yes you have to be careful when sanding the edges!
Now we have cráp in our Floor" 😂😂
@leggari products Is it possible to add more veins to a white epoxy metallic floor after the fact? My wife is not happy at all with the minimum veins our floor guy put in. I can send you photos.
Sand 80- 120 grit repour the entire flour add desired veins benifit is now you can have under tones from the prior job, as well as your new veins and it wont take any where near as much resin
If I haven’t hit the top coat I have a little piece of the foam from the roller that dried I wanna clip it off it’s a little Lump
Yes just sand it smooth or cut it out before topcoat!
I do get this spots when i do coats , problem is it gets in second or third coat which should be my final coat.. what should i do on such situation without doing another coat.. i tried sanding those out with 180 but it didn't get off and yes there is also a fear of wood getting exposed so i dont want to sand that hard
Top coats are clear so cant use colors
And also clear repair/filling don't match on sanding ..😅
I just got my epoxy floor done. The company could have been better. I came to her to confirm if those chucks and pieces were typical. It seems like they are when you don't sand. So now, I have to go behind them and sand for myself. I should have followed my first instinct and done it myself. Plus, I don't want to damage it. What about hairs? Would sanding help with that? Thanks guys!
If there hairs and other minor imperfections in the floor we recommend lightly sanding them sown and then you can reapply your topcoat. This process might differ when using another company's products but this is how we address imperfections like the video shows💯💯
Our cat went on our floor while it was being worked on ( before applying the sealer ) he said he had to redo the whole floor ?? We didn’t want thta sixne it had already taken over 4 days to fe tour floor done . Are you telling me he could have fix just that little spot where the 4 paw prints were left ?
can you lay an epoxy flooring over MDF subfloor
For sure💯 The process will be a little different but check this out 👉ua-cam.com/video/qOXqsk4HCdY/v-deo.html
If I sand my metallic coat can I ad a clear coat of epoxy for top coat dose it come shiny I have small bubbles everywhere that’s why I want to sand the floor but I want shiny finish
Yes! As you can see in this video 👉 ua-cam.com/video/wz7THPQuxhA/v-deo.html, we sand out the floor's imperfections as well before applying any topcoat 👍
You can check out our floor kits here leggari.com/order-flooring/#metallic-epoxy-kits and feel free to contact our customer service with any questions concerning our products.
1-844-LEGGARI (534-4274)
customerservice@leggari.com
Is it gonna mess up my designs in my metallic coat if I sand it cause the design is amazing right now
And for too coat can I ad clear epoxy
@@LeggariProducts can i sand out my poly topcoat if i have bubbles in it then re poly?
Can your products be used on aircrete ?
Email customerservice@leggari.com They will be able to help you with your questions!
Overhead door with crumbs of dirt on it got me
Matte is like looking at a floor that needs a good mopping. Glossy is the way to go
Great choice thanks for watching!
Hi how can I get some in Israel
Leggari.com We ship internationally!
Holy shit. I must be a natural. I've only poured a few sample pieces all came out perfect but my first time doing it on a project, a coffee table and I got uneven edges and over sanded and got some of the wood showing through the epoxy and just tried hitting those spots with the sharpie just like dude did it, little dabs and rub it in then did a clear coat with some color accents and those spots blended in perfect . I learned the hard way no matter how many perfect pours you do you can't get cocky and push things, my problem is I keep messing with the design. Cause every time I look at it I see something new that could look better or I question myself if the smallest details that Noone would ever notice but I do cause I'm examining my work so sometimes I push the working time to the last possible work time minutes.j guess my luck ran out.. trust your work and don't second guess yourself is the lesson I learned
Love ❤👄👄
Thank you!
I already have epoxy floor, can you go over and redo epoxy ?
Yes, just need to sand to scuff up the surface and you are good to go!