I would like to thank you for all the videos on the nb4. helped me out a lot. I think that this radio is so under rated I absolutely love it. thanks again
Always find your videos helpful mate and I love my nb4 so always find myself looking through your videos if I need help with something. I think I might just have to get this gyro for my Typhon 6s. Thanks bro
Hello , am toying with the idea of this Noble unit over spektrum dx5pro 2021. I currently have a Arrma infraction v2 and LOVE the AVC, what gyro would I need if I got this noble unti in order for me to get the same performance? Thanks :-)
You can run the new INr4 GYB receiver and get way better stability control than the arrma receiver has it has full steering and throttle control and is fully adjustable from the nb4 :) if you look through my vids you will find on I did about it :)
@@WTFRCCars does the nee iNr4 receiver come with a gyro built In? Where do you buy it from because I can't find anywhere in the UK that sells it? Thanks
Hi ordered the FS - GY1 And it does not look anything like that it’s a small circuit board with four wires and a white plug any thoughts on that many thanks in advance
Hi nice video but I have a question if I use the small receiver that comes with the nb4 transmitter I have to pot the Gyro in digital or analog I'm installing this Gyro in my team corally python 6s and in my radix 6 sorry I'm new in this hobby and I just get the flysky nb4 like a week ago please let me know thanks
@@WTFRCCars hi yea that's what I don't know I tell you I have the smallest receiver that comes with the flysky nb4 FGr4s so that receiver is what I don't know if is digital or analog
ok i have my noble pro now & i'm having a problem ~ it just stop steering ~ i do have forward throttle & brake but no steering ~ when i first turn it on the steering works fine ~ when i put the car on the grown & drive it for less then 1 minute the steering stops working ~ im using the noble pro with FGR4 V2 Receiver, futaba GYC441 gyro & Perfect Pass Monster 56KG Digital Servo. I need help
Remove the gyro and try it, if that works check what you have the servo refresh rate set to, if it's on digital try setting the manual 333hz could be the pro is running too fast for it
You need to know the polling rate of the gyro as in what it can work at, most servos can run at 333hz so you may be better to set the nb4 to that, I know the AGFRC gyros are high quality and can run very fast definitely upto 844hz but never used other brands
@@WTFRCCars ok im ordering the AGFRC gyro now & i have to use the noble pro cause it has the 3 steps for my drag racing & speed runs ~ the nb4 only has 1 step but the nb4 did give me great range with the FGR4 V2 Receiver so im going to test the noble pro with that same receiver & see if i cant get the same range & Thanks
It doest make any difference as when it powers on it zeros it's self and all movement is relative to 0 :) I would however mount it flat as you want to measure left right movement :) and up front seem to work the best.
@D.J.Holman-le4zw just set what ever channel you have the gain control in to a dual on the transmitter then as you change the dial it will change the gain
I would like to thank you for all the videos on the nb4. helped me out a lot. I think that this radio is so under rated I absolutely love it. thanks again
Yeh it's a cracking radio and thanks 👍
Thank you. Just ordered an AFRC-GYS-1 V3. Hope it's just as good
Yeh it's even better I have done a vid on it too
Be interested to see how it compares to the SkyRC Gyro. It’s cheaper, and has sockets on it instead of the wires coming out.
Seems very well made too machined alloy case
Always find your videos helpful mate and I love my nb4 so always find myself looking through your videos if I need help with something. I think I might just have to get this gyro for my Typhon 6s.
Thanks bro
For the price it's a great gyro and thanks glad ya like the vids :)
Hello , am toying with the idea of this Noble unit over spektrum dx5pro 2021. I currently have a Arrma infraction v2 and LOVE the AVC, what gyro would I need if I got this noble unti in order for me to get the same performance? Thanks :-)
You can run the new INr4 GYB receiver and get way better stability control than the arrma receiver has it has full steering and throttle control and is fully adjustable from the nb4 :) if you look through my vids you will find on I did about it :)
@@WTFRCCars does the nee iNr4 receiver come with a gyro built In? Where do you buy it from because I can't find anywhere in the UK that sells it? Thanks
This is how it works
ua-cam.com/video/Y5NzTJtoDs0/v-deo.html
Hi ordered the FS - GY1 And it does not look anything like that it’s a small circuit board with four wires and a white plug any thoughts on that many thanks in advance
Sounds like ya got one for a mini z or something like it
@@WTFRCCars Would you advise to get servo with built in Gyuro
Really depends on what radio ya running I run the nb4 and pro and they have a gyro receiver
Hi nice video but I have a question if I use the small receiver that comes with the nb4 transmitter I have to pot the Gyro in digital or analog I'm installing this Gyro in my team corally python 6s and in my radix 6 sorry I'm new in this hobby and I just get the flysky nb4 like a week ago please let me know thanks
Depends what servo your using the gyro with you have to match it with what servo so digital with a digital servo :)
@@WTFRCCars hi yea that's what I don't know I tell you I have the smallest receiver that comes with the flysky nb4 FGr4s so that receiver is what I don't know if is digital or analog
The receiver can do both it's the servo that's digital or analogue so you need to know what servo you have the receiver doesn't matter as it does both
Craig, other agfrc gyro works?
It is because the gy01 is the most exoencive one.
Any gyro will work with the nb4 and pro
I want to set up one of these with my FlySky G7P
It's easy I have a vid for it in the g7p playlist :)
Mine powers on but doesn't turn. Using yeah racing hackslider red one
ok i have my noble pro now & i'm having a problem ~ it just stop steering ~ i do have forward throttle & brake but no steering ~ when i first turn it on the steering works fine ~ when i put the car on the grown & drive it for less then 1 minute the steering stops working ~ im using the noble pro with FGR4 V2 Receiver, futaba GYC441 gyro & Perfect Pass Monster 56KG Digital Servo. I need help
Remove the gyro and try it, if that works check what you have the servo refresh rate set to, if it's on digital try setting the manual 333hz could be the pro is running too fast for it
@@WTFRCCars i remove the gyro & it works perfect but i want to use a gyro so how do i get it to work with the gyro?
You need to know the polling rate of the gyro as in what it can work at, most servos can run at 333hz so you may be better to set the nb4 to that, I know the AGFRC gyros are high quality and can run very fast definitely upto 844hz but never used other brands
@@WTFRCCars ok im ordering the AGFRC gyro now & i have to use the noble pro cause it has the 3 steps for my drag racing & speed runs ~ the nb4 only has 1 step but the nb4 did give me great range with the FGR4 V2 Receiver so im going to test the noble pro with that same receiver & see if i cant get the same range & Thanks
Yeh the settings for polling rate are same for nb4 and pro
You did not mention the position the gyro needs to be in to properly function.
It doest make any difference as when it powers on it zeros it's self and all movement is relative to 0 :) I would however mount it flat as you want to measure left right movement :) and up front seem to work the best.
Can you give a link please? I find this video very helpful. Thank you 👍🏻
The link is in the video description :)
www.banggood.com/custlink/mD3dBeqd18
Oi amigo é bom esse gyro?
Yes really good / Sim muito bon
Ok obrigado, eu tenho um d5mr v2 chassi , você recomenda , vale a pena eu comprar esse gyro ?
would you use this gyro for high speed runs
Yeh would work fine, I'd start with it turned down low and you will need a very fast servo :)
@@WTFRCCars thank you sir
Thanks for this one. Pretty affordable gyro.
How do you turn this on on a nitro car on ch.3?
Just connect it to ch1 for the steering and use any free channel for the gain control
@@WTFRCCars I can't figure out how to get to the gain in the remote for gyro
@D.J.Holman-le4zw just set what ever channel you have the gain control in to a dual on the transmitter then as you change the dial it will change the gain
@@WTFRCCars that's what I'm having trouble figuring out how to do
What transmitter?