Oh man. First of all, thank you so much for making a video to address my problem in the middle of the night. That is super considerate of you. I know you're so good at solving these kinds of issues. I will get some stronger reading glasses and attempt to fix. Might need to buy a screw extractor set, as well. Thanks again. You're the best.
Your tool restoration videos are like watching a Buddhist monk practicing zen meditation. Lots of concentration and zen like focus. I have learned a lot from you. Many many thanks.
Thanks for the lesson. Bought a Channelock 810 this weekend at a garage sale for 50 cents. I cleaned it to the best of my ability and the jaws started working. I called the company and they told me it should unscrew to take the thumb-wheel out. I then saw your video on the axle removal. Thanks again.
I have a old J.H. Williams AP-10 adjustable wrench that had belonged to my dad who has passed away. Our barn took 21 inches of water in the flood of 2016. This wrench was rusted shut. I used electrolysis to remove most of rust, got it loosened up. I have never taken one apart, but I knew about the screw. I was able to back the screw out a good bit, but it hung up. I then searched UA-cam, and and found your video. I ran the screw back in, aligned the slot with the peens, and at vise, I was able to use small punch to push peens back as you suggested. I have plenty of adjustable wrenches, but my curiosity led me disassemble the wrench. Thanks for your video. Joe Estes, Bossier City, La
I love your channel because you have practical solutions. when you come across a problem not everybody has a machine shop with 1000's of dollars in tools to fix a 50 cent yard sale find.. keep up the great work
Thanks for that, i have never needed to do that, but i have some of the older style wrenches, now i know what to do if need be, thanks again, from Australia.
Thank you so much. I have been trying for about 3 weeks to get a pin out. I seen Ben’s post yesterday and realized I wasn’t the only one. Nice detail video and great tips. I want to thank you and thank Ben for posting his problem.
The pliers turned out beautifully! They look like they just came out of the box. And your right, the new nut you made for it looks so much better then the rivet. I had never seen a spoke tightener until now. Thanks for sharing these cool tools.
I am sure this will be one of your most useful videos. Addressing a problem that many of us must face. I am almost ready to open my tool channel yet, after 7 years, I find I am having to refurbish and/or locate many of the tools I will need to start. Seems that they have been scattered all around the five buildings or just piled in a corner. And all your videos give me more and more incentives to get with it. I will be back in Texas in a week or so from cold and raining Georgia. Thanks for this video...captjack
I just bought an 18” vintage Jamestown, NY Crescent Adjustable wrench and was having this same issue. I dremeled out the peening and the screw backed right out. Thank you for your detailed videos!
Thank you so much for doing this video. I know it meant the world to Ben. And it was a great refresher for me as well. I have kept up with Ben since you mentioned him a while back and like his style. Hope he continues on and if so he will get better and better. Thanks for all you do to help us tool nuts.
Ingenious, thank you sir for sharing your experience with us. A simple yet effective method . Thanks again been struggling with a wrench for a few days already this video is invaluable. As always your skillful craftsmanship is amazing.
Great practical advice. Thanks for sharing this information. I had always wondered how to remove a thumb wheel pin or screw and after watching this I know how to.
I've had my knuckle buster for years and never gave the adjuster a 2nd thought till the pin fell out and took the thumbwheel with it. I just picked everything back up and crammed it back together. All my stuff is pre-oiled anyway so no worries. Thanks, Crafty Scout and happy day 2 U!
Thanks for the video. Great job of explaining the process. I like Ben's channel also and I could tell he was getting a little frustrated. I would hate to see him give up on those wrenches.
Very nice instructional video. It’s like going to tool restoration class. I’m sure Ben got something out of this and he will not be so frustrated. Thanks for all the interesting videos!
Hi Frank! I saw the look on Ben's face and he wasn't having fun... Like me doing plumbing! LOL This should all be fun and everything a challenge! Thanks Frank!!!!
This video is unbelievably useful. Thank you so, so much. I have a combined adjustable spanner and alligator jaw spanner where this has shown me my next steps. A HUGE thumbs up.
Really like that beginning with the speed nut wrench first time we have ever seen one at 55 wow never see it all. You sure have a GREAT accumulation of fine hand tools wondering back in time just how many of any type tool you select from your collection were made in America that would be an interesting story to share as would how many of the tools on a particular group of your collection are still in business. I think I love American history a lot sorry for that. MEMORY LANE HERE Being from aerospace job shop involving sub-assemblies for aircraft structures, we used a staking tool a circle of very hard tool steel of half moons protruding from the equally hardened steel cylinder you hit these with a hammer and it formed the material of the holes edge into the holes diameter equally in the circumference of the hole usually for bearings bushings even like in your great video share threaded headless screws. Nice video share thank you for the memories. Lance & Patrick.
Thanks so much for taking the time to do such a detailed run through! I don't restore wrenches but a few of the tips are sure to come in handy on other things.
Ugh, easy outs or screw extractors... I broke one off in the engine block of an 87 Ford Taurus wagon I owned when I was in my early 20's. Needless to say that was the last time I used one. If I knew then what I know now and learned from people like you, that car wouldn't have become razor blades so soon lol. Awesome video as per usual.
Thanks so much for talking about this. Thanks to you, I'm trying my hand at tool restoration on a couple of wrenches. One has the threaded pin and I was able to get it out. The other (an auto wrench) has a pin. Thanks so much for the tips. Keep posting videos, I can't get enough.
Hi Robert! It really helps in this hobby to watch other people restoring tools so you can see what works for you! Some tools are just tricky but easy if you know the trick! These adjustable wrenches are fun if they aren't to beat up! Thanks so much!
wow i bought a small vice at an auction ,,cause i liked it ?? when i seen you turn yours on it's side i was amazed ,,, i didn't know what i had .. Thanks for the video Ed Loretto Ontario Canada
Thank you, thank you my friend! This classical fits under great mysteries which seem obvious upon revelation! You are so generous with your knowledge. 👍🏼👍🏼👍🏼
Awesome mock-up and instructional skills. A couple more ideas if I may; if you’re trying to isolate the heat to just the screw try applying the tip of a soldering iron to the screw head for a couple of minutes (this works great on old rusty screws in wood too). If you don’t have a soldering iron heat up a nail point to red hot while clamped in a vice then touch the wrench to the nail. If you have a pin instead of a screw that is frozen to the adjusting knob -like your auto wrench-slide a shim between the knob and housing then use a punch to drive the pin in slightly to break the bond. Awesome video-Time to regroup and re-attack Ben Mall! PS. Who the hell would give this a thumbs down?
Great timing and Great tips and explanations. I have some wrenches to do as well. one is a very rusty thing my kid found on a biking trip, and brought me as a gift...(you can see it on my Facebook) Hopefully I will have it easy on the cleaning and derusting... Thanks for sharing.
Hello Yotam! I already passed by a few wrenches because the screws looked very bad and I knew it was more work then I wanted to put into that tool! Thanks so much!!!!!!!!
I noticed if you were to look at purchasing a replacement knurl it comes with a spring. Do you know if the older Cresent brand Wrenches had springs? I ended up using the knurl and making my own pin but am wondering if I missed a step. Another great video by the way!!
I absolutely hate screw extractors. I found that HF has cheap sets of left hand drills. There are usual Chinesium but have always got the job done for me. Nice tips on removing the staking from those wrenches. I usually use the milling machine to remove the staking from the holes though. I have an old Palmgren vise like that and use it all the time. Thanks for a very informative video!
Your videos are great and I appreciate the way you go through different scenarios. If the set screw was peened over to stop it from backing out, what do you do at the end of the restoration to prevent it from backing out in the future?
Thank you SC! For the best tutorial/info on how to handle this challenging problem. One question: When u went to the step of drilling out the pin - What do you think about drilling a smaller hole and tapping and threading a small bolt or machine screw into the end of it, and using that to pull the pin out? This would only be on a rusted/stuck pin. Is it worth it to try? Or too much hassle or risk of breaking a tap or screw off in there? Either way thank you again! My shop isn't set up right now, but when it gets a little warmer out I'll be taking a crack at this!
an impact screwdriver is a good tool to have & it helps to heat wear the the tread of the pin is as you said it sometimes on the other side nice video.
great work showing how to remove different pins waiting on next great video. Also mate you need to go to RetroHax published today what an amazing set of pliers never seen anything like them you will want a pair im sure
ScoutCrafter, great stuff, just caught this vid. Please advise as to which grinding wheels and buffing wheels you use along with the compound. I bought an old Craftsman bench grinder from the late 40's early fifties. Has 7" wheels on it with 5/8" arbor. Heavier than all get out. BTW, I think you meant to spell "axle" not axel, unless you were referring to the figure skating move
Hey scout..have you ever took the screw out of a crescent wrench and the threads are rolled over? I have a nice older wide jaw james town crescent I recently got from a garage sale. It doesn't open and close the greatest. It freezes up and gets stuck. I realized the set screw or whatever you call it is rolled over/kinda stripped at the end of the screw. It needed to be tightened but because its damaged it won't tighten. I was wondering if you've had any experience fixing them threads and if you have what do you suggest I try? Dremel? Thanks for any help, Scout!
Very instructive video, Scout. Did the third section of the pin just fall out after you cut the center section with the Dremel tool? Those jaws on that wrench look so gnarly you could paint it up a little and get it a job in one of those 1950's monster movies like Godzilla or Gamera. - Kathie
Hi Kathie! Yes! The two small pieces just fell out but the pin in the thumbwheel needed some persuasion! =) The wrench does look like something that could bite you! =) Thanks!!!!!!!!!!
Sean- I have a few that are literally worn out, the sliding jaw is too sloppy to repair and the tolerances are gone, However many adjustable wrenches can be tuned up to perform well again. ua-cam.com/video/nMjOvriAApM/v-deo.html
Oh man. First of all, thank you so much for making a video to address my problem in the middle of the night. That is super considerate of you. I know you're so good at solving these kinds of issues. I will get some stronger reading glasses and attempt to fix. Might need to buy a screw extractor set, as well. Thanks again. You're the best.
Thanks for the lesson this morning. This is why the community platform is so beneficial.
Your tool restoration videos are like watching a Buddhist monk practicing zen meditation. Lots of concentration and zen like focus. I have learned a lot from you. Many many thanks.
Thanks so very much! So glad you enjoy them!
Thanks for the lesson. Bought a Channelock 810 this weekend at a garage sale for 50 cents. I cleaned it to the best of my ability and the jaws started working. I called the company and they told me it should unscrew to take the thumb-wheel out. I then saw your video on the axle removal. Thanks again.
Thanks Christopher!!!!!!
I have a old J.H. Williams AP-10 adjustable wrench that had belonged to my dad who has passed away. Our barn took 21 inches of water in the flood of 2016. This wrench was rusted shut. I used electrolysis to remove most of rust, got it loosened up. I have never taken one apart, but I knew about the screw. I was able to back the screw out a good bit, but it hung up. I then searched UA-cam, and and found your video. I ran the screw back in, aligned the slot with the peens, and at vise, I was able to use small punch to push peens back as you suggested. I have plenty of adjustable wrenches, but my curiosity led me disassemble the wrench. Thanks for your video. Joe Estes, Bossier City, La
I love your channel because you have practical solutions. when you come across a problem not everybody has a machine shop with 1000's of dollars in tools to fix a 50 cent yard sale find.. keep up the great work
Hi Scout - just a note of thanks for trying to help out Ben. Have a happy day!
Thanks for that, i have never needed to do that, but i have some of the older style wrenches, now i know what to do if need be, thanks again, from Australia.
Thank you so much. I have been trying for about 3 weeks to get a pin out. I seen Ben’s post yesterday and realized I wasn’t the only one. Nice detail video and great tips. I want to thank you and thank Ben for posting his problem.
The pliers turned out beautifully! They look like they just came out of the box. And your right, the new nut you made for it looks so much better then the rivet. I had never seen a spoke tightener until now. Thanks for sharing these cool tools.
I am learning something new with each video. Thank you!
I am sure this will be one of your most useful videos. Addressing a problem that many of us must face.
I am almost ready to open my tool channel yet, after 7 years, I find I am having to refurbish and/or locate many of the tools I will need to start. Seems that they have been scattered all around the five buildings or just piled in a corner. And all your videos give me more and more incentives to get with it. I will be back in Texas in a week or so from cold and raining Georgia. Thanks for this video...captjack
Excellent information. I learn so much about tool restoration from you.
I just bought an 18” vintage Jamestown, NY Crescent Adjustable wrench and was having this same issue. I dremeled out the peening and the screw backed right out. Thank you for your detailed videos!
Hi Mike, They can be tricky, I do prefer the threaded in pin! Thanks!
Thank you so much for doing this video. I know it meant the world to Ben. And it was a great refresher for me as well. I have kept up with Ben since you mentioned him a while back and like his style. Hope he continues on and if so he will get better and better. Thanks for all you do to help us tool nuts.
Ingenious, thank you sir for sharing your experience with us. A simple yet effective method . Thanks again been struggling with a wrench for a few days already this video is invaluable. As always your skillful craftsmanship is amazing.
Hi Andrew! I am so glad you enjoyed the video and it helped! Thanks!
The dreaded extractor bits.....it's fun when one of those snaps off in the broken bolt you're trying to extract.....cheers mate.
Great video. The info on Removing the pin is what I need to finish up old Ford wrench.
There is no teacher like experience :D Nice video and thanx for spending the time to show us your experience.
Great practical advice. Thanks for sharing this information. I had always wondered how to remove a thumb wheel pin or screw and after watching this I know how to.
Excellent tutorial! We've all experienced the frustration Ben shared in his video.
Those dreaded pins!!!!! LOL I hate them!! Thanks!!!!!!
I've had my knuckle buster for years and never gave the adjuster a 2nd thought till the pin fell out and took the thumbwheel with it. I just picked everything back up and crammed it back together. All my stuff is pre-oiled anyway so no worries.
Thanks, Crafty Scout and happy day 2 U!
Hi Lewie! Long ones too! LOL Thanks so much!!!!!!
@@ScoutCrafter You got it, Scout! You GOT it!
Ah! Mr Finger helps us understand the instruction we are seeing. Thanks again.
Thanks for the video. Great job of explaining the process. I like Ben's channel also and I could tell he was getting a little frustrated. I would hate to see him give up on those wrenches.
Hi Virginia! Next time you are at Ben's Channel go to his "Videos" link and look at some of his original music! Really amazing!! Thank so much!!!!!
Very nice instructional video. It’s like going to tool restoration class. I’m sure Ben got something out of this and he will not be so frustrated. Thanks for all the interesting videos!
Hi Frank! I saw the look on Ben's face and he wasn't having fun... Like me doing plumbing! LOL This should all be fun and everything a challenge! Thanks Frank!!!!
This is a valuable part of your channel topics. Problem solving. Any problems that might challenge restoration are important. For me anyway.
You are so right!!!!!
Great video. Your timing is perfect. I’m struggling with one right now. Thanks!
"These jaws are too mangled." Hahaha! What great support and encouragement, ScoutCrafter. Fantastic! Thanks for sharing!
Those are some ugly jaws! LOL
This video is unbelievably useful. Thank you so, so much. I have a combined adjustable spanner and alligator jaw spanner where this has shown me my next steps. A HUGE thumbs up.
You sir, are the man! Excellent solution. I watched Ben's video before yours and felt his pain. You make it look so easy. Thanks for what you do
I felt so bad seeing Ben's frustration but I have been there more then once! LOL Thanks!!!!!!
Really like that beginning with the speed nut wrench first time we have ever seen one at 55 wow never see it all.
You sure have a GREAT accumulation of fine hand tools wondering back in time just how many of any type tool you select from your collection were made in America that would be an interesting story to share as would how many of the tools on a particular group of your collection are still in business.
I think I love American history a lot sorry for that.
MEMORY LANE HERE
Being from aerospace job shop involving sub-assemblies for aircraft structures, we used a staking tool a circle of very hard tool steel of half moons protruding from the equally hardened steel cylinder you hit these with a hammer and it formed the material of the holes edge into the holes diameter equally in the circumference of the hole usually for bearings bushings even like in your great video share threaded headless screws. Nice video share thank you for the memories. Lance & Patrick.
Hello AA! Wow! Sounds like a great tool!!! I have to revisit the Speed-Wrench! I found that in the garbage! Thanks!!!!!
Excellent tutorial Scout, thanks for sharing this. And as you said, this is the fun of restoring - figuring out how to solve the problem.
Thanks so much for taking the time to do such a detailed run through! I don't restore wrenches but a few of the tips are sure to come in handy on other things.
Thanks so much!
I started my restoration... And pin removal the day before you posted this lol.great tips, would have saved me time
Hello tumbo! When they go well it’s always nice but so often they don’t! Thanks very much!
Such a wealth of knowledge ScoutCrafter. Thank you for taking the time to help ben and us all with your solutions for this.
Ugh, easy outs or screw extractors... I broke one off in the engine block of an 87 Ford Taurus wagon I owned when I was in my early 20's. Needless to say that was the last time I used one. If I knew then what I know now and learned from people like you, that car wouldn't have become razor blades so soon lol. Awesome video as per usual.
That was a great tutorial ScoutCrafter!!! Love seeing all the detailed process!! Thanks!👍
Thanks so much for talking about this. Thanks to you, I'm trying my hand at tool restoration on a couple of wrenches. One has the threaded pin and I was able to get it out. The other (an auto wrench) has a pin. Thanks so much for the tips. Keep posting videos, I can't get enough.
Hi Robert! It really helps in this hobby to watch other people restoring tools so you can see what works for you! Some tools are just tricky but easy if you know the trick! These adjustable wrenches are fun if they aren't to beat up! Thanks so much!
wow i bought a small vice at an auction ,,cause i liked it ??
when i seen you turn yours on it's side i was amazed ,,,
i didn't know what i had ..
Thanks for the video
Ed Loretto Ontario Canada
Thank you, thank you my friend! This classical fits under great mysteries which seem obvious upon revelation! You are so generous with your knowledge. 👍🏼👍🏼👍🏼
Another great video. Thank you for sharing your methods. I always learn something.
I love your pointer.
Thank you for posting this video. Now I know why my crescent wrench will not screw or move at all.
THANK YOU...for sharing.
Awesome mock-up and instructional skills. A couple more ideas if I may; if you’re trying to isolate the heat to just the screw try applying the tip of a soldering iron to the screw head for a couple of minutes (this works great on old rusty screws in wood too). If you don’t have a soldering iron heat up a nail point to red hot while clamped in a vice then touch the wrench to the nail. If you have a pin instead of a screw that is frozen to the adjusting knob -like your auto wrench-slide a shim between the knob and housing then use a punch to drive the pin in slightly to break the bond. Awesome video-Time to regroup and re-attack Ben Mall!
PS. Who the hell would give this a thumbs down?
Truer words have never been spoken in regards to your comment on the screw extractor! Lol
Fantastic tips there giving me confidence to tackle those issues
Keep it up Scoutcrafter
Great video. Always a great teacher.
If it was easy everyone would do it. It's the challenge that makes it fun for me. Great video
Some challenges are fun and some are just a pain in the %#$! LOL Thanks!!!!!!
Yes sir you're a good guy always with the helpful tips, awesome video! 👍 👍
Massively helpful. Big thanks for this one!!!
Thanks for parting with your hard learned knowledge.
Thanks, I’ve got a couple that have been through a fire and been a a lost what to do. Will definitely give this a shot.
Awesome tip for restorations as always...Thnx for your effort and vid...and I can buy this kind of chuck for my old dremel 3000.
Hi Kadir! I think so! The Dremel tools are lifesavers!!!! Thanks!!!!!!!!
that is nice of you to help someone out
Thanks for sharing great tutorial video !!
You are very welcome
Thanks for sharing that. I can definitely see that coming in handy.
Ready for bed, but noticed the video had to watch.The pointer you use awesome
Thanks so much! My fingers are just too big!!!!!! LOL
LMFAO I know I've said it before, but that miniature hand pointer is so damn funny.
Good little tip! Thanks for sharing.
Thanks, Scoutcrafter! Really helpful video.
Great video. Thanks for the information.
I learned a few new things!!! Thank you!!
Thanks so much, I was wondering why it was not backing out.
Great timing and Great tips and explanations. I have some wrenches to do as well. one is a very rusty thing my kid found on a biking trip, and brought me as a gift...(you can see it on my Facebook)
Hopefully I will have it easy on the cleaning and derusting...
Thanks for sharing.
Hello Yotam! I already passed by a few wrenches because the screws looked very bad and I knew it was more work then I wanted to put into that tool! Thanks so much!!!!!!!!
No wonder the rest of us have trouble finding these old tools! You have them all! Good video, thanks for posting this for us amateurs.
LOL- I have lots or tools waiting restoration! LOL Thanks!!!!!!!!!
Definately one for the "saved" file. Appreciate you!
Great stuff mate ...... love ya little pointy finger thingy.
Great tips buddy!👍👍👍👍👍👍👍
Really love watching your vids....i had the same issue with the same type of adjustable wrench
Great advise Scout.
Thanks so much JA! 😃👍
I noticed if you were to look at purchasing a replacement knurl it comes with a spring. Do you know if the older Cresent brand Wrenches had springs? I ended up using the knurl and making my own pin but am wondering if I missed a step. Another great video by the way!!
Very good . Thanks . If a floating pin is loose when putting it back, how do you tighten it up? Or do you just replace the pin?
Some great tips in this video.
I absolutely hate screw extractors. I found that HF has cheap sets of left hand drills. There are usual Chinesium but have always got the job done for me. Nice tips on removing the staking from those wrenches. I usually use the milling machine to remove the staking from the holes though. I have an old Palmgren vise like that and use it all the time. Thanks for a very informative video!
Your videos are great and I appreciate the way you go through different scenarios. If the set screw was peened over to stop it from backing out, what do you do at the end of the restoration to prevent it from backing out in the future?
Mike- I use Medium strength Lock-Tite Never had an issue! Thanks!
Glad to see Mr. Finger again...
Love the little hand! What are the threads on that set screw holding in the wheel?
I would say you are an expert.
Hello Scout
Good lesson.
I hope to see the restoration and other keys from this box, there were interesting self-locking keys
That pointing finger cracked me up. Good instructional video but like you said, I hope I never have to do use those screw extractors.
Thank you SC! For the best tutorial/info on how to handle this challenging problem. One question: When u went to the step of drilling out the pin - What do you think about drilling a smaller hole and tapping and threading a small bolt or machine screw into the end of it, and using that to pull the pin out? This would only be on a rusted/stuck pin. Is it worth it to try? Or too much hassle or risk of breaking a tap or screw off in there? Either way thank you again! My shop isn't set up right now, but when it gets a little warmer out I'll be taking a crack at this!
Great video God bless you family and friends Scout.
Thanks Reynaldo!!!!!!
As soon as we see the pointing hand come up,, we know this is an important tip to remember.
an impact screwdriver is a good tool to have & it helps to heat wear the the tread of the pin is as you said it sometimes on the other side nice video.
thanks good job i got one to fix will help me lots !!!!!
The more videos I watch of you the more I'm sure you were used for the inspiration of Hank Hill
great work showing how to remove different pins waiting on next great video. Also mate you need to go to RetroHax published today what an amazing set of pliers never seen anything like them you will want a pair im sure
ScoutCrafter, great stuff, just caught this vid. Please advise as to which grinding wheels and buffing wheels you use along with the compound. I bought an old Craftsman bench grinder from the late 40's early fifties. Has 7" wheels on it with 5/8" arbor. Heavier than all get out. BTW, I think you meant to spell "axle" not axel, unless you were referring to the figure skating move
Hey scout..have you ever took the screw out of a crescent wrench and the threads are rolled over? I have a nice older wide jaw james town crescent I recently got from a garage sale. It doesn't open and close the greatest. It freezes up and gets stuck. I realized the set screw or whatever you call it is rolled over/kinda stripped at the end of the screw. It needed to be tightened but because its damaged it won't tighten. I was wondering if you've had any experience fixing them threads and if you have what do you suggest I try? Dremel? Thanks for any help, Scout!
Great teaching moment! Thx.
Melissa- I felt so bad seeing Ben not having fun at a hobby that's supposed to be fun! Thanks!!!!!!!
EXELLENT VIDEO.THANKS.
Thank you.. God Bless..
Thanks so much my friend!
I got about 2 adjustable that need thumb wheel removal...I give it a try...
Thanks great video and years ago you could buy rebuild kits from crescent
Very instructive video, Scout. Did the third section of the pin just fall out after you cut the center section with the Dremel tool? Those jaws on that wrench look so gnarly you could paint it up a little and get it a job in one of those 1950's monster movies like Godzilla or Gamera. - Kathie
Hi Kathie! Yes! The two small pieces just fell out but the pin in the thumbwheel needed some persuasion! =) The wrench does look like something that could bite you! =) Thanks!!!!!!!!!!
Very helpful, thank you so much :)
Great tutorial, thanks!
I'm curious, how does one know when it's time to replace your adjustable wrench?
Sean- I have a few that are literally worn out, the sliding jaw is too sloppy to repair and the tolerances are gone, However many adjustable wrenches can be tuned up to perform well again. ua-cam.com/video/nMjOvriAApM/v-deo.html
Hammers are the secret. If you can't fix it with a hammer the problem is electrical.
Curiosity Forge Allan LMAO!!! 😂😂😂
Good one hammers fix everything don't they lol
In my blacksmithing shop, YES.
Curiosity Forge ha!!!
Lol! also...hammer to fit then paint to finish!