Dave Mostly because my watch is older than 6 years. Plus the fact it highlighted the sensor module was cactus. Nice to know Tissot stick to a “working” product. Nothing $200 won’t fix.
One detail was missed, how to sync the hands. Go on setting ,(12/24, f/c, km/m) hold T for 3 sec and now that is synchro mode, align both hands at 12 using +/- button
Jakfilm I feel your pain. You think this is technical I have a solar powered Casio that does almost everything and does it right. No less expensive than this one.
Haha, I’ve owned this watch for nearly 9 years and didn’t even know about the light function at the end. How do you set the time if the digital time is out of sync with the analogue time??
Handy to know: you set the time by the hour and minute. The display of the seconds will jump to zero (00) as soon as you press the "T"-button on the side of the watch. So, if you are trying to sync your watch to the "00" second of another clock, press the "T"-button on you watch on the moment the other clock shows 00-seconds.
Great video , Great job in demonstrating functions, am considering this timepiece it looks like the complete package & titanium too boot. Thanx. P.S.Tx. 🗽
Hold center button until beeps. Plus or minus buttons to change the day. Keep pressing the minus or plus buttons and it will start changing months, keep it pressed down and it will start changing the year.
I got this exact same watch and cannot work out how to change the date format to dd.mm yy from the default mm.dd yy ... you got any ideas Mr. James Bond?!
I just got one from a dead relative. Think it is from the '90's. Is this junk, or a good watch? Current watch is a Seiko which keeps very accurate time. All these functions are just confusing. I would need to watch this vid each time I want to use it?!
To alter the ‘units’ setting press the crown (or T Button) to activate the glass and then push the centre of the glass until ‘Opt’ shows on the digital display. Then press the crown (or T Button) until the current unit setting shows i.e something like 24h. cm. Then press and hold the bottom right (minus) button until your choice shows for the unit setting. Press the crown (Or T Button) to validate the selection. Thanks,
It would be helpful to wait a little bit in chronograph mode to see if after a few seconds the hands return to show the time or if keep indicating CHRONO. I need to mesure time that last a few hours and meanwhile I need to know the time of the day.
I have this exact same watch and once you activate the chronograph/countdown timer, it does return to time keeping mode after about fifteen seconds of none use. The stopwatch/countdown timer remains displayed and you can still use it whilst time is active on analogue.
you press the center button and that activates the sappire face and there will be a (T) at the 6 spot to indicate that you can touch the face with a reaction from the watch
Hi Francesca. To change the digital display you have to press the ‘T’ button to activate the glass and press the centre of the glass until you reach time and date (please note you cannot get the date and time to show in the digital window at the same time). In order to set the time or change the date you need to reach the digital setting as already stated and when whichever you need to change is showing you need to press and hold the ‘plus’ button for two seconds then use the ‘plus’ and ‘minus’ button to amend the date or time up or down. You can validate the new setting by pressing the ‘T' button. We hope this helps, let us know if you need further assistance!
I have had 2 of these. They are not waterproof the vents in the back go straight to the inner watch components. Go to Walmart and ask them to change the batteries and they will not touch it. After breaking the first one I took it apart. Two batteries. Easy 5 min to swap out. Just a heads up. First time I needed batteries it was still under warranty. They had me send it to their factory. Took 3 months to get it back. They sent me a bill for over three hundred worthless murkin dollars to change the battery. Had to prove to them it was under warranty. U.
6 years later.....2019, this tutorial still works!!!🤣 Thx heaps👍🏼😎
This watch is solid. I also had it for like 5 years and it still looks strong
Why wouldn't it work? Is the watch supposed to transform into a different watch over 6 years?
Dave Mostly because my watch is older than 6 years. Plus the fact it highlighted the sensor module was cactus. Nice to know Tissot stick to a “working” product. Nothing $200 won’t fix.
Got this watch for seven years. Been through the wars. Still enjoy all the functions
Actually nearly eight years now
I'm at 14th year, Rock solid
@@viveksurendran9505 I messed up with the sensor a few years ago when changing battery. Haha. Mine. Not working anymore.
@gold6813 only that could kill this watches I think. (Inexperienced battery changes)
This videos been saving my ass for 10 years 😂
Once again you have rescued me John, Thank you
Your tutorial is INCOMPLETE
One detail was missed, how to sync the hands.
Go on setting ,(12/24, f/c, km/m) hold T for 3 sec and now that is synchro mode, align both hands at 12 using +/- button
every time we go to & from daylight saving's i have to re watch this lol , thanks
Thank God someone made this video!!
I have to watch this video every 6 months when we switch to and from Daylight savings time. What a dope.
Jakfilm I feel your pain. You think this is technical I have a solar powered Casio that does almost everything and does it right. No less expensive than this one.
Bah
So do I
Don't feel bad me too' lol
There is an easy work around. Move to a country that does not use DST. 👍🏻😄
Haha, I’ve owned this watch for nearly 9 years and didn’t even know about the light function at the end.
How do you set the time if the digital time is out of sync with the analogue time??
Same as you, had to find the manual on-line- at manualslib.com. try it?
Redmenace96 Found a video on how to do it in the end. All good now.
How to you come off the T-touch mode? Or do you just have to wait 15 secs?!! My second question is, how do you set the seconds?
Handy to know: you set the time by the hour and minute. The display of the seconds will jump to zero (00) as soon as you press the "T"-button on the side of the watch. So, if you are trying to sync your watch to the "00" second of another clock, press the "T"-button on you watch on the moment the other clock shows 00-seconds.
Just bought one but says batt but I was told the battery is good but something wrong with the watch.
Thanks. I always forget when time changes in fall and spring!
great vid, can you show how to calibrate the compass?
Great video , Great job in demonstrating functions, am considering this timepiece it looks like the complete package & titanium too boot. Thanx. P.S.Tx. 🗽
Well displayed. THANK YOU. Now I don't need the manual.
a number of modes not covered being the second tap on any function, a simple starter guide I guess rather than a full review
How do set/change the date. Want to change from day/month/year to: day/month/year
Hold center button until beeps. Plus or minus buttons to change the day. Keep pressing the minus or plus buttons and it will start changing months, keep it pressed down and it will start changing the year.
How do you set the tide information on your Tissot Touch
I got this exact same watch and cannot work out how to change the date format to dd.mm yy from the default mm.dd yy ... you got any ideas Mr. James Bond?!
It is the instruction manual, in options if I remember right
Часы охуенные!!! Сам их в руках держал. Цена того стоит!
I just got one from a dead relative. Think it is from the '90's. Is this junk, or a good watch? Current watch is a Seiko which keeps very accurate time. All these functions are just confusing. I would need to watch this vid each time I want to use it?!
Practice makes perfect. 😁
Nice looking watch.
how do i change from Fahrenheit to Celcius?
To alter the ‘units’ setting press the crown (or T Button) to activate the glass and then push the centre of the glass until ‘Opt’ shows on the digital display. Then press the crown (or T Button) until the current unit setting shows i.e something like 24h. cm. Then press and hold the bottom right (minus) button until your choice shows for the unit setting. Press the crown (Or T Button) to validate the selection. Thanks,
It would be helpful to wait a little bit in chronograph mode to see if after a few seconds the hands return to show the time or if keep indicating CHRONO. I need to mesure time that last a few hours and meanwhile I need to know the time of the day.
I have this exact same watch and once you activate the chronograph/countdown timer, it does return to time keeping mode after about fifteen seconds of none use. The stopwatch/countdown timer remains displayed and you can still use it whilst time is active on analogue.
What if my touch is not responding to touch buttun bt everythg else is responding to clicks n lights too..how to fix it?
What if I can't get it to turn on at all??
Hello,
Ho w to change the year, at the moment I can only change the date, thank you
How do u change the date ,
My older Touch, without backlight, now shows temperature too high and the compass is completely out. Meteo display is dead too
I put new movement and capter but compass is not working
also, how do i troubleshooot my watch when the glass doesnt work
you press the center button and that activates the sappire face and there will be a (T) at the 6 spot to indicate that you can touch the face with a reaction from the watch
what if the time is showing in the digital display and not the date? Should it work the same to set the time? Its not working for me. Thank you
Hi Francesca. To change the digital display you have to press the ‘T’ button to activate the glass and press the centre of the glass until you reach time and date (please note you cannot get the date and time to show in the digital window at the same time). In order to set the time or change the date you need to reach the digital setting as already stated and when whichever you need to change is showing you need to press and hold the ‘plus’ button for two seconds then use the ‘plus’ and ‘minus’ button to amend the date or time up or down. You can validate the new setting by pressing the ‘T' button. We hope this helps, let us know if you need further assistance!
The Watch Hut Hi there. I could manage to set the time but the time shown on the display isn´t the same shown by the pointers. Please help.
The Watch Hut i
Gostei da ilustraçao,consegui acertar o meu relogio
I have problem with forecast mode it would show the real climate
Did I miss setting the date ?
Thanks my dear
Thank you!
We have not experienced any significant issues with this model. Tissot watches also come with a 2 year guarantee. Hopefully this is helpful to you,
I have had 2 of these. They are not waterproof the vents in the back go straight to the inner watch components. Go to Walmart and ask them to change the batteries and they will not touch it. After breaking the first one I took it apart. Two batteries. Easy 5 min to swap out. Just a heads up. First time I needed batteries it was still under warranty. They had me send it to their factory. Took 3 months to get it back. They sent me a bill for over three hundred worthless murkin dollars to change the battery. Had to prove to them it was under warranty.
U.
Wrong. The watch is rated to 100m.
Hi, mine is flashing BALL. what does this mean?
Ron Mexico lol
كم.سعرها
hello, how do i set the hourly beep, or i can't??
You cannot.
Hi you ! I have a watch Tissot but I can't set it. Pls help me
THANK FOR THAT
Thank You.
thank very helpful
how to set time
Thanks
Ciao Ìzìu
useless video, doesn't show adjusting time like changing from hour to min or day to month
INUTILE. Aucune aide.................
No date or year instruct?