Chevy impala ENGINE HOT A/C OFF indicator
Вставка
- Опубліковано 30 лис 2018
- 2008 3.5 Chevy Impala ENGINE HOT A/C OFF dashboard light on? Temperature gauge stuck on cold? easy fix! Replace the coolant temperature sensor, and remember; disconnect the car battery while doing the work or you may trigger other engine trouble codes.
- Авто та транспорт
Way better than the other videos I’ve been seeing about this problem. This is so simple I love it.
Thanks for the vid,alotta easier than other videos show.Also I would not of disconnected my battery previous to taking out the sensor thanks for that also man.
Has to be the easiest way of replacing the temp sensor . Other vids require removing the intake & heater hoses which like to seize on to the metal tubing. Great vid 👍🏼
If I had the money to pay a mechanic I would of just sent it to you for sharing this video, thanks Bub. If you ever in Philadelphia look me up, cold one on me cheers 🍻
Thank you
I thought about taking this part off too and you proved it that it makes it a lot easier. I watched a professional video and those guys are idiots professional idiots
What a sneak, he takes off the upper engine mount.
Thanks, I leaned something new, awesome thinking.
Thank you so much for sharing this with us. Now I know what to do. Great job
good melody. it then stopped 😢. and then resumed 🎶 🎵, I started LOL, I didn’t see it coming 😆 nice 👍🏼 good breakdown
This came on for the second time on my 08 3.5 on my way home from work after a year and few months I'm smh like WTH I'm fans were running constantly something disconnect the battery for 20 minutes this time I forgot I disconnected the battery heading to the part store to get another sensor I tried to start my then connected the battery back up started my car and my coolent temp sensor started working again my fans wasn't running constant any more either I'm like WTH drove it for a while working like normal so far thank God for that!
Perfection, thank you for sharing!!!!
Awesome video, thanks much!
Thanks bro helped me out a lot !
You are very welcome, !
How did he get to the bolt on the back, I'm having a hard time to get to the bolt to remove the bracket
That same words came on while driving on a road trip. Is it safe to drive back home this showing up on my dashboard?
What does it mean if My car does this same thing but only when I use the heat.
I got my tempt cooling sensor change and thermostat but my car ac still over heats
I just broke off the plastic connector and slid a 19mm socket and ratchet in on the right side under the throttle body to break the sensor loose,then a 19mm ratchet wrench to back it out.
Less talk more work 💯
Thank you so much!!!!
Thanks! To the point!
What size tools are you using
Good job 🎉
I have a 2011 Chevy Impala, well it overheat and the radiator crack Engine Hot A/C Off turn on.
well I replace the Radiator, the fans, the water pump, the thermostat, the Temperature Sensor, fuses AND when i star the car
still overheats. At the same time the engine tremble and lose power. Can SOMEBODY HELP........!!!!!
Bottom bolt on motor mount was a pain in the butt if it wasn’t for that bolt it’s a 10 or 15 min job that one bolt was a 15 min job dang thing
Nice late 70s disco beat!!!
How did he take the third bolt off the bracket with the heat shield in the way?
I’m wondering the same thing someone plz help
I replace my coolant temperature sensor just like this video and I am still having the issue where my temperature gauge is all the way on the bottom. Any ideas of what else it could be?
Thermostat stuck open
Replace your thermostat…….it’s stuck open……had the same problem earlier this morning & thought it was the sensor…..checked out to be the thermostat……..then diagnosed after n sure was the thermostat…..cleared the codes……all good now
What is this part called
Clear the codes
Just clear the codes
I have a 2010 Chevy Impala and it’s overheating it went all the way to hot that msg came on and my car stopped coolant is leaking everywhere
Did you blow the head gasket?
why temperature gage doesn't work?
@@elloydsmith6475 I'm guessing it did work since it went all the way to hot.
Recently it was my whole radiator that was cracked. I have a 2012
Do I have to empty coolant to do this? Or just unplug battery and go at it
no, you do not have to drain the coolant, when you are ready to remove the old sensor, have the new one ready to install, the process should take 2 to 3 seconds, minimizing coolant loss.
I just did this and now it don’t even try to read the temperature what could i have fucked up
This is happening in my 2007 chevy impala, the A/C vents makes a bad clicking sound too when thebAC Hot turn off warning comes on.
I read that I can use a box end swivel ratchet instead of disassembling my car, I hope its true for the 2007 model.
Pete, the clicking you hear on your impala is a common problem as the gear often strip, The AC vents are controlled by an actuator as you turn the knob to control air direction, it is easily fixed with a 1/4” ratchet and a 7mm socket
It is located behind the glove compartment, here is the part number should you decide to fix it yourself; Door actuator # Dorman #. 604-108,
@@seabee1625 thank you, if I decide to keep my car and fix it then I'll definitely change those actuaters.
@@seabee1625
Thanks man…..I have the same issue with my 08 impala……I plan to get both actuators for that side n replace em…..& you said what tools you need???
Actually, there are 3 separate " gear boxes," the one is just left of the glove box, ( 5 min job) the other 2 are located pretty much right in the middle of center console. Which requires taking apart most of the entire front console apart, minimum few hour job at least. All 3 gear boxes on my impala are completely destroyed. So every time I turn ac on it off, setting thermostat lever to coolest setting and all the way up for max heat, the boxes go off on there clicking rampage. So for example I have heat of max, then turn it to coolest setting, then turn ac on each box will click for about 3 minutes, stop for a sec then go to the next box and that one will start clicking then time for the third box do do its thing. I've had all 3 now gear boxes just haven't gotten around to replacing then. Too busy replacing everything other part imaginable on this car. So yes, it is EXTREMELY ANNOYING, but kinda last to fix on my list.
I have a 2013 chevy impala and I changed the coolant temperature sensor and the engine hot a/c off light has come back on. Could it be the thermostat?
Bennie Mangle Jr. the thermostat is stuck open not allowing the engine to meet required temp!!! Cussing computer to false read !!! Not sensor waisting your money light will come back in a couple of days!! Also check wiring at sensor pigtail!!
Where is the thermostat on the 2013? Is it the one on the top next tp/close to the alternator or the one on the driver side near the starter?
Why do my fans stay on ? If I do this ? Will it turn them back to normal?
Rise, seems to me that the A/C high pressure switch in faulty, I suggest to run the engine to normal operation temperature, turn the a/c off and make sure the defroster is off also, the fan should not run. try that and let me know
I didn't see you drain fluid, Is it necessary?
Teresa Casillas no! But it’s the thermostat not sensor,, also check for frade wires at temp sensor pigtail!!!
I got anxiety watching this lol
Mine just came on driving home from work. Am I safe to use the heater when driving to work? It will be 5 degrees in the morning
Josh, you can continue to drive your car, but, my suggestion is to park in a safe area, turn off the engine, pop the hood and visually inspect the coolant level, you can do so by looking at the reservoir, open the yellow plastic cap, if is empty, you have a leak, you should have that checked out immediately, if the level is ok, drive it home then replace the temperature sensor.
Temp sensor very rarely fails!! Light will be back!! Check for frade wires at temp sensor pig tail if all is good then change thermostat!!!
I2canFIX! I’ve changed mines and the light came in again 🤦🏾♂️
I changed mine. Same issue 3 weeks later. Seems intermittent.
Could fan relay cause?
I did that and it still says the same thing??? What do i need to do??
As I stated in my video, you have to disconnect the battery to prevent others sensors to trigger codes, at the same time the ECM will reset it self. Now if you have damaged connector, chafed wiring or coolant leaks, the code will reappear, I hope that helps
What part is that
Coolant temp sensor
In a 2012 its in the front. Way more easier
What’s the name of that piece ?
T-e-m-p-e-r-t-u-r-e s-e-n-s-o-r
😎
Is that the same for a 08?
Absolutely! All impalas 2007 to 2013 equipped with 3.5, 3.7 and 3.9 engines. The temp sensor in my video fits all these engines.
Seriously could say one fucking word!!
my viewers have high level of IQ, next time if you need a video with words search for Juny Tony
My problem was a thermostat.
well done! Sir
Simple...👊🖒👍👌🤘
That’s a bad thermostat
WATCH THIS VIDEO HOW TO FIX PROBLEM
ua-cam.com/video/6PkEdsHnNfM/v-deo.html