Ghetto blaster Pt 2 Lighting improvements on the SBC 100 to DIY Vapor Blaster
Вставка
- Опубліковано 18 бер 2021
- In this video, I cover off the method I used to improve the lighting on the SBC-100 vapor blaster conversion using aluminium extrusion door slides and 3d printed brackets.
Any questions, feel free to comment or send me an email at:
josh@armouryenterprises.com
Books and nozzles available here:
www.armouryenterprises.com/co... - Навчання та стиль
Hi v been with you for a long time now and I thank you for the help I have had off you now I have 2 of these one for sand one for vapour don't get me wrong I'm still building hat to put on hold as I moved home so everything is on hold at Moe lol story of my life anyway the sand blasting cabinet is almost done just need final touches but my vapour if been getting all the stuff together I built one of your gun just having problems with the jet side but hopefully will figure it out I have a pump dirty a pump if built it like you would a big cabinet it sits on a old washing machine case and the tank is in that I like the way you took all that away and put it on a bench I'm getting a wiper for mine going to redo the lid so it fit washers are in wash hose is in so it can wash down stuff was going to do a self feed system but was going to work out more tanks and pumps and draineg filters lot of work now you got me thinking that is good thing to get all the pump stuff gone sort of still have a pump but one powerful enough to push the slurry faster then with out all the other bits I can put it away if needed to be sorry I'm in the UK so some stuff will have to be thought about changed a bit to make it work I don't mind a pump on the out side but fitted to the tank to pull though what I need what everyway if I put it in side will needed to be sealed so the water don't get in on your jet I know you do a 2mm and a 5mm but what I don't know is how far you need to drill in on each hat to chang the gun a bit as fittings are different over here so hat to work with what I could find but thank you for pushing me to try and make this work will appreciate any kind of help that can be given if can be plz keep safe and all the best keep up the good work
Keen to see some videos of your set up! Let me know if you post them to your youtube!
My guns for small compressors use a 2.5mm air jet and an 8mm ceramic.
Cheers!
Soon as I find out to edit I will lol I can do most things but anything to do with laptop's or pcs nope no clue lol don't get me wrong have tried many times got a couple on there but not much my channel is called ( THE TINKER CHANNEL) I made your brass one the end I have got is a 7mm ceramic but in your video you say it's goes from a 2mm to a 5mm but the problem I'm having is the depth of each once I sort that then I will be ready to finish the build and still waiting on my wiper system that's been taking like it feels for ever I have a old mini one at my dad's so might have to have a look at hes but any help I can get on that would be a great benefit but thank you for getting bk to me if seen your videos a lot sent some ppl to you to there is another gent if seen he made a open system and a closed system I would mined a closed but need to think about room but as soon as I can sort out my video on both units I will let you know
Like that mate, good job 👍
Thanks Mark!
I Josh buddy ive just set up myself a channel under my UA-cam name ive only done a short clip has i was only testing but would like to make some restoration videos on classic motorcycles & even restoration of parts but yes nice one on your demonstration on this ghetto blaster
Nice one buddy!
I just subbed. Keep it up!
@@ArmouryEnterprises nice one Josh
greetings from Istanbul. Can't you connect a light to the sandblasting gun?
Hi,
Yes, absolutely and I have seen it done a few times before. Though it is not without complaint.
It is a harsh environment for the light and the lens is quickly damaged, making the light dull. Also the gun is not always pointing from the same direction that you are looking, so it casts odd shadows that can be annoying for users.
It also makes the gun more cumbersome.
Thanks for watching!
Hello friend, I am from Russia, in your example I assembled a camera and a pistol with my own hands, but I ran into a problem, the part is not cleaned to such an ideal state as yours. tell me, maybe I missed something, maybe you add something to the water to make it shine, please help
Hello Daniel,
Can you measure your water/media ratio? And what media are you using? Also, what air pressure?
Thanks for watching!
@Armoury Enterprises Thanks for the help. Air pressure is stable 5 atmospheres. The ratio of water to glass beads is 1: 3. Air nozzle 2 mm, water 5 mm. The dirt was gone, but there was still no shine, maybe I forgot to add some third ingredient to the emulsion?
I only use the glass and water. Did they definitely sell you glass beads and not crushed glass?
Try increasing your pressure to 6 atmospheres, and increase your air nozzle to 2.5mm and your water to 7mm.
Josh
@@ArmouryEnterprises thank you very much for the advice on how to distinguish glass beads from broken glass, they are very small in size
@@user-np2ho6ec6e
Is it written on the bag? If so, it is usually correct. If not, you can only tell by looking in a microscope.