REBUILDING A BARN FIND R32 SKYLINE | PART 3
Вставка
- Опубліковано 7 жов 2023
- ➢Store: www.benkispec.com
➢Instagram @rex_hyt / rex_hyt
➢ BUSINESS ENQUIRES: rextonLHYT@gmail.com
➢Discord: / discord
⬇ My Postal Address ⬇ 💌📫
P.O. Box 2178 Brighton North 3186, Australia, Victoria - Авто та транспорт
i am 110% all for this build. I think I might even buy a shirt.
Same here bro
Yeah fr.
same
Nvm $50 lmao
Was looking forward to this all week. Rex & Friends, keep it up! Will be sick once shes done mate!
REX you should hang up a white board in the garage and keep note of all the expenses and costs involved as you build it then tally it all up once this car is finished !
Then perhaps you flip it for a profit and move on to the next one. 😊
Just a suggestion.
actually feel like I'm watching this take place in real time. Love it aye
bros taking me back to my high school days of binge watching my fav ytbers right after school🫶🏽🔥
This is shaping up to be the magnum opus series of the channel I reckon. Once again great video brother, keen for next week’s!
man sundays cant come quick enough ive been so keen for this series
One of the most anticipated build on UA-cam for me right now keen as to watch this journey 🤌🏻🤌🏻🤙🏻
The amount of information you give things you do is immaculate, choice of words is always great! Keep up the fantastic work bro, doing super well!
Bros gonna have a finished build by next week. Absolutely smashing it and its all working so well knock wood lol
i love the build so far! this is a project ive wanted to take on for a few years and its amazing to have a youtuber show the reality of it! thanks so much and i cant wait to see its future!
Your mom being supportive and seeing her in the car was very cute
You have me hooked on this channel now. You have inspired me to have a crack at putting my fully rebuilt rb20 and hks2530 turbo into my 1972 toyota hilux.
Great job with the coolant flush, you should also run piston soak to clean out the head too.
aye mum approved 😂
This build is helping me with motivation to get my 33 on the road again. Keep up the good work Rex!
Rex, your mum is so cute. She sounded like she was so proud of you. If I was you mum I would be so proud of you!!!
I love this series so much and you put these videos out pretty fast too. Thank you! Keep going!
Benki Spectators are up n about over this build .Throthing for the next installment. Were all gonna have to wait for those parts .
LET'S GOOOO
I am loving this build makes me miss mine that i had as my second car years ago.
Your channel popped into my feed, this morning, watched all the skyline vids, keep going man, can't wait to see this finished.
I’m so keen for this build! The long waits for uploads bloody kills me haha great vids REX! ❤
i allready know this is going to be one of my favourite card restoration series’s on youtube
Itterally just watched the first few parts today. What a treat.
ur content is improving so much, the quality is insane, keep the amazing content coming
It's been great fun watching this build, thanks 👍🏽
The wait was worth it !!!!!, Love seein the beauty come back
This is a great series to watch! I can't wait for each episode to come out!
Loving this series. Super glad that it's going well.
Hell yea brotha bloody stocked for this build and I’m sure most of us just as hyped as you are let’s go RB power
wow from you guys pushing the car to driving down the street that amazing what people can achieve if we put are minds to it. keep building the car i hope it looks as good as the skyline photo at 13:49 love what you guys do.
trix always coming in clutch
You are an inspiration brother.
Check if any air is coming out of the master cylinder hole, that seems faulty. If air is pushed out upon pedaling, attempt bench bleeding the cylinder first. Or else attach a copper line to the hole in question, and put the other end in the MC reservoir. Pump the pedal until no bubbles come out of the copper line into the reservoir.
Had the same case on my Civic; went through 2 MC’s before figuring out this method
Yesss keep it up rex we all are loving the skyline progress 💯
I LOVE the series and can't wait for the next video🔥🔥
these videos are so well made, i enjoy watching these videos sm
Awesome work Rex. Love the Skyline content.
Loving this series bro 🔥 keep it up
This is awesome, I’m so keen to see how it turns out.
can not wait for part4
loving this series
the build be looking great
I love projects cuz u appreciate everything so much when you do it yourself
so keen to see the next part keep it up
such an awesome series
Haha agreed too, I have been looking forward to this update all week. I even designed my evening around it
Well done mate. Love the enthusiasm.
rex this is the best rebuild on youtube keen to see what it looks like when its done
i love this series, cant wait for the next one
I watch all your videos since you got the Chaser. I never comment, but just want to say that I'm all for this build. Keep at it man, can't wait to see more progress!
U and Mike lake are smashing the builds go on Rex 🔥
stumbled apon this video, its making me feel like actually getting my '32 back out of the shipping container its been in for a decade! - However PLEASE make sure that you have bleed cooling system using the bleed screws!!
Straight from the RB26DETT /RB20E / DE / DET / CA18i / RB25DE engine manual, page EN-534:-
3. COOLING WATER FILLING PROCEDURES
1 Make sure the radiator hose and heater hose clamps are tightened securely.
2 Set the heater control lever to HOT position. (For vehicles equipped with automatic air conditioners, first place ignition switch to ON position and remove the external sensor connector).
3 Release the radiator cap and air drain plug. (RB20E: Intake manifold collector area. RB20DE/DET: Intake manifold collector area and in front of glove box).
4 Fill the radiator gradually (filling speed: slower than 2L/ min) to the top of the spout with coolant. Fill the radiator until the water in the reserve tank reaches the MAX level line indicated.
5 After closing the radiator cap and air drain plug (RB system), start the engine and allow it to idle.
6 The engine will continue to idle until the thermostat opens. (Touch the radiator flow hose and make sure hot water is flowing). If a large volume of air remains, the water temperature gauge needle will move past the middle as the engine temperature rises abnormally. If this occurs, stop the engine wait until it cools and add water to the radiator repeatedly as described above. After the thermostat opens, race the engine for 10 seconds at 2500rpm two or three times. Check that water temperature does not rise excessively.
7 stop the engine and allow it to cool. Release the radiator cap and check the fluid level. If the fluid level lowers, return to setp 4 and repeat the process.
Loving this build! Gives me inspiration to work on mine :)
I dont even care what the finished product is like im just loving the journey.
Loving the skyline series
Awesome job of the nissan Skyline and
Looking a really good Skyline you make
A awesome to drive and bodywork be lots fun, building on the car 10/10
I think the scary looking part is that ding on the roof, but I'm sure you'll work something out, crackin work mate.
Also is this skyline a factory GTS-T or is the turbo/ turbo'd engine bolt on?
Yeh I've been waiting to see how rex accomplishes getting a window to fit, he be ok but looks interesting
if has GTS"-T" its factory turbo
def think he needs to reach out to a panel beater, might even get a deal for shouting out the company on the channel
@@cxezu yeah that’s what I mean. Since often the turbo is added / engine swapped to a base model GTS
yeah that damage is pretty bad.
great video rex i am loving the progress you are making
Love this series❤
LFG another banger! 🔥🔥
LETS GO REX KEEP PUSHIN IT ITS SO AMAZING
Watched every part of the build so far keen to see new uploads
broooo rexxx this r32 is coming along man i cant wait for more eposides on this car g
its gonna be mint bro
such an amazing project
Rex never disappoints 🤝🫶🏽
Love the project man. Keep it up ❤
watching this makes me so happy man. this is the good shit.
Just like adult Lego, he says? 😅
Try do anything on any v6 Audi and let me know how easy the blocks click together 😂
Love this build!
i watch u all day
i love your r34 build series
Awesome build! I recently bought a master cylinder from the wreckers and thought it was defective, but as it was completely dry inside it took a lot of pumping but eventually got the cylinder to purge all the air, out of each of the 4 ports on the master.
out of all the things broken on it, it still has intact air vents
idk, but this gives me your old mr2 vibes, loving the content. you got this rex 💪🏼
goated frfr
W series!!
Ya mums a bewdy mate. She was great. On point👍🍻🎯
This is the sort of thing we all want see on UA-cam look forward to the next stage on the rebuild of the skyline godzillaaaaaaaaa
Watching from philippines! Nice job dude!
yippee new r32 vid!!!
Always a better day with Rex provided the goods ☝️☝️
best series on youtube rn
Thanks brother !
great progress in such a shot amount of time
The episode of this skyline gtr is so fun to watch
Rexh gets his R32 running 💪Whoop
piece by piece rex well done :)
Another great vid!
Top video Brother love the content of the skyline
Great video rex 👍
Nice work dude👍👌😊.. And I’d be replacing the thermostat,water pump,and radiator cap,as the thermostats probably half seized,and the water pump “propellor Finns” are also probably rusted and barely there,too circulate the coolant properly,BUT all in good time hey😉✌️👍
I Love this project 🥰
Did you test thermostat before putting in? If the bottom rad hose is cold your thermo could not be working properly - stuck closed. And with the high idle there is an IACV (idle air control valve) on the back of the intake manifold. Replace the gasket for it and adjust the screw with a screw driver to drop idle down ;)
1:11 whistlin diesel strat
This build was such a good idea, getting triple the views on these 👌
Waiting on Part 4 🔥
Have you checked the vin to see if it was stolen?
Great video 🤙
Small victories bud.. subbed.. looking good and hope to see some awesome donuts and. Linelockers up your street because that will make your parents smile..