Це відео не доступне.
Перепрошуємо.
The New King Of Entry Level Pressure Washers: Testing The Active VE52 (1.94 GPM)
Вставка
- Опубліковано 14 сер 2024
- ***FOR WARRANTY PURPOSES KEEP YOUR STOCK GUN AND WAND***
Alright pressure washer bros, you guys have been asking about this one for quite a while now and it's finally here. I tested out this unit a while ago and it did an impressive 1.94 GPM which is insane, but that also means this little guy beats every other entry level pressure washer at its price point and even beats the Kranzle a little, but only in flow. So it's time to ditch your Stupid Joe and upgrade your life a little bit (at least until you're ready for a Kranzle.)
Time Stamps:
Intro 00:00 - 05:15
QD Rant 05:16 - 06:08
Assembly 06:09 - 37:24
Get the Active Pressure Washer & Kits Here:
www.obsessedga...
For more insight into my life and business become a member of Inside the Hex: www.obsessedga...
Join Our Closed Facebook Group of Like-Minded Obsessed People: / obsessedgarage
Website: www.obsessedgar...
Obsessed Garage Store: www.obsessedga...
Gear We Use Everyday (Cameras, Computers, Etc.):
www.amazon.com...
Podcast: obsessedgarage....
Facebook: / obsessedgarage
Instagram: / obsessedgarage
Twitter: / obsessed_garage
Stay tuned for more crazy!
5:49 - "Don't be stupid I'm assuming you're smart". This is why I enjoy OG.
Keep watching. It gets even better.
@@timkinley1779 jjjjjojnn o oo. Ok
@@timkinley1779 kk
@@timkinley1779 kk j
@@timkinley1779 kkkmkk. I know kkkk I. I. Kkkk k kkk kkk nijjjj
i don't know what my life has devolved to that i'm now watching an hour long video on a $200 pressure washer
Because Billy Mays is dead...?
Matt in the Billy Mays voice " But wait there's more " the fittings come apart like so lets do that one more time in slow motion!!! 😂😂
I'm the same way. If you don't mind me psychoanalyzing us both. I think this is a very masculine thing to do. It's really about money. A company providing us a product for a certain price and then screwing us over with lower specs or reduced life have metaphorically cucked us as men and stolen our livelihood. Spending hours researching a product to save a couple hundred dollars isn't about the money it's about 'beating' the enemy who is attempting to steal our hard earned resources. Men don't like getting taken advantage of. We will avoid it at all costs even if we waste potentially more time and money avoiding the tricks it was worth it to us because we didn't get swindled.
right
Condescending Matty mixed with three tablespoons of passive aggressiveness is straight-up golden.
Best comment I’ve seen!
Ha, ha... This was my fourth video of the day. My guys begged me to make this one. It got spicy.
@@ObsessedGarage can you use a CR Spotless Simple Chuck Spotless Water System with this machine? Or would it be to hard on it?
Also how can I get that short nozzle your using on that EGO blower sitting in the background?
"I'm not saying you're crayon eating idiots who can't read, but if you overpay me for stuff that you could get anywhere else for half the price, you probably have a pretty smooth brain, so I'll show you how to use plumbing fittings myself"
@@carlod545 it won't hurt anything to use DI tanks in line. I use a On the go water softner paired with a DI Rinse pro 50 and seen no effect in operation
*Breathing air* - Matt: "You're not gonna need that"
"this is almost 80% nitrogen. We don't include that in our air"
Matt’s progressively gotten more and more impatient and obnoxious regarding his customers. I love it.
"This crap would be fun if it wasn't for customers."
Only the stupid ones 😂
@@timkinley1779 Its like the saying "I used to be a people person, but people ruined it for me"
And that’s why we’re here
Never forget where you came from or you will turn in to the asshole that made your life hell when you first started. That's not the kind of person to be.
52:36 "My name is Matt Moremen, if you don't like me I don't care." Had me dying haha 😂😂 The ending was pure gold.
Agreed lol
Don’t be fooled, he cares or he wouldn’t have said it.
Note to self: call Jeff to cry about my nozzles not fitting in my Aqualine.😂
How you liking your acqualine? I just ordered mine.
What’s an acqualine ? My mom died after a what seems like a decade of hell so I missed the last 18 months of videos/updates
@@Fee.1 sorry to hear that man. It's a newer mtm release. Gun-wand etc.
I've had that pressure washer for a little over a year and couldn't find any reviews on it. Took a shot in the dark and it's been running strong. Glad to see this product getting the recognition it deserves.
"go get your wife she'll help you" .😂.💀😂💀.😂
damn you can just see how much Matt enjoyed throwing that included stuff :DD
I bought the ultimate AR from you. I was one of those idiots about the fittings but only worse. I first ordered an extra fitting before I sent the email. I ordered a cart for mine and made the AR mobile. I did the fittings exactly as stated. I had to order a 22 or 24mm wrench. Not 1 leak. I was blown away how much power the AR has. I also bought the wand fitting set from OG so I could do house washing. Very happy with it and love not hearing a gas engine.
on the fittings page, just put a 3 second clip of matt taking apart the fittings xD
Replaced a underwhelming Dewalt 2400psi pressure washer that would not produce foam even with 1.1 orafice...and got a Active VE52 and decided to go for water flow vs pressure...as I will be using to wash car much more than side of house or patio. Hooked it all up today with Flexzilla hose with quick connects, Uberflex pressure hose with quick connects, MJJC Foam Cannon, Mega Foam, Tire Cleaner, etc. Where the Dewalt 2400 spit foam and was very runny....this thing looked like I was laying down layer of snow on ski slope. Like night and day performance. No leaks, no issues, no worries.... Thanks for the reviews.
“First we throw it in the garbage can, then we throw it in the dumpster.” - Matty
I want to buy some fittings just to call about how 1/2 of them are missing.
I have this exact pressure washer but it’s branded simonize here in Canada and it’s a Canadian tire brand but identical to this one and being able to pick it up for $200 Canadian when there’s a sale it’s definitely worth it’s weight in gold makes plenty of foam in my cannon and easily portable
"Don't be stupid. I assume you're smart."
Dead. 😆 🤣
I feel like someone in the media team tried to tell Matt he had to be nicer to people, which is what resulted in "Don't be an idiot... I assume your intelligent, but quit being an idiot" and "I'm sure you're a nice person, but quit being dumb"
If that is what happened, thank you, because that just made this into gold.
Matty in epic form on today's upload. What a character 😂😂😂
I like to use a 4 foot breaker bar and cross thread my fittings so they're so tight I don't need o-rings
Don't worry, I am going to Facebook call Bryce anytime I need help with the setup. 😆
You're "that guy". 🤦♂️
Called a joke@@donaldthomason4588
I know this is an old video but I’ve been using a 1.1 orifice in my foam cannon for 2 years now with my active/Simoniz pressure washer if you didn’t already know Simoniz is the Canadian version made by active
This was a beauty from start to finish. Well worth the complete watch. So many gems have to watch again.
I never comment on anything but Matt's attitude to his customers is the best. I bet every retail worker everywhere wishes they could be like this.
My sunjoe, stuck in the dusty corner of my garage, hooked up to cox reel/kobrajet hose/sgs gun, has lasted for two years now. All season washing in NJ across three cars. Will probably go for this once that kicks
“Well Matt, I knew it” lmao 🤣😂
“The king of entry level pressure washers”. Starts throwing away pieces.
4:02 unboxing a pressure washer and throwing most of it to the floor is one of the funniest things I have seen on this channel
That was a proper ragesplaining, Matt...more please!!!
Thanks to this I discovered a o-ring break in my inlet hose QD. Always leaked from day one and ive seen other Active videos leaking in the same area. I never looked 😆 once replaced, leaks gone and the unit did not kick on/off once when i used today.
Bought the Canadian equivalent of this which is the "Simoniz platinum 1800 psi" from Canadian tire. Solid so far!!
Hopefully it lasts for you. Too many negative reviews on this unit, on the Canadian Tire website. The power button breaking seems to be a big issue.
@@SnakeDoctor5104 You can't really trust the Crappy Tire reviews lol
Today I learned I’m smart because I can disconnect a quick coupler 🤣
LOL I just died when Matt started throwing all the original attachments.
And here I was thinking you only hydrate at the sink.
Nice.
Just bought Kranzle K1122TST from you a few days ago, I hope it ships soon. Great video thanks for weeding out all the junk out there for us
I bought this as my first pressure washer for my detailing business. So far so good, ive done 10 cars and have had zero problems whatsoever so far. Thanks for the recommendation.
how is it holding up?
Still running strong! No leaks, no electrical problems, nothing. Probably have 200 hours on it now aswell.
I’ve had this bad boy for about 8 months and I can tell you for the price it’s the best pressure I’ve had yet.
same
@@RonH465 I haven’t had a issue with mine. Maybe it might be your GFCI.
This is my favorite OG vid ever. From the Face-off ref to the hostile indifference. I had my wife help me type this.
This is one of my favorite videos matt does its 3 months old and i still finding myself watching it just for the laugh
“Don’t be Stupid” 😂😂 The Raw honesty is MUCH appreciated in a world saturated with Political Correctness! Executed like a straight OG love it!
Watched the video because of the comment saying you were being obnoxious and impatient! Glad to hear you like us Canadians eh! I like the format of finally just telling people what they need and to stop thinking they know better. Lord knows no one else has put in the work you have.
This guy is a maniac, the way he talks to people….. I love it! We need Miked up video of you taking customer calls…
Ha, ha... Thanks.
Priceless ! You remind me of my high school shop teachers in the 1960's !
I laughed so hard as you were tossing the "junk" pieces in the floor
My cheapy Karcher has been going for at least 20 years now and I'll keep running it until sparks start flying out of it!
I've had my Karcher forever too!
Is the ve56 a newer model than the ve52? You mentioned minor updates every 6 months, does the model name change or is there any way to see or know what has been updated?
I’m not in the market for a new pressure washer, but this video makes me want to buy one just because.
Anyone have an issue hooking one of these up to a 50 foot kobrajet and there being surging? I have zero leaks, have tried multiple M22 15mm to 3/8 QC fittings with multiple Orings. There is not a single drop of water leaking from anywhere, it just surges when using the kobrajet hose. No issue with the trash hose it came with.
Could be air air leak. Could be inside the gun or possibly one of the couplers on the hose.
I'm having a similar issue with mine. It doesn't surge with it's OEM hose nor with a short Sun Joe hose I had sitting around, but I haven't been able to figure out which fittings are sketchy yet. I'll continue testing this weekend.
Go on active’s website and check the reviews before buying this washer. Mine lasted 7 months with minimal use. Yes, 2 year warranty, but good luck getting a reply from the cs team.
5:24 and I'm dead. I wouldn't have imagined this was ever a problem. I just got three in the mail and thought, "Hey, that's nice that they sent these together."
LOL...Hilarious...Matt is CRAZY, we know that and...it's great. I'm obsessed ALREADY and now, I'm getting obsessed about my Garage. I WILL NEVER take the Fox stickers off the Fork on my Yeti but, I was convinced to order that Ultimate gun setup and HO. LEE. CRAP. It's friggin' AMAZING. Don't think about it, just close your eyes and press "BUY" and you won't regret it. It's STUPID GOOD. So much so that since I was starting on the Kool Aid I bought 3 Pressol Industrial v1.3 LMNOP spray bottles and...WHO KNEW a SPRAY BOTTLE could be so awesome. I feel WEIRD about liking this channel and buying these things but DANG. It proves you can obsess about ANYTHING...and it be worth it. I will be "giving" you more money...
Half the emails consist of names like “...auto detailing” 😂😂 trynna act like professionals
" if you don't like me, I don't care"... 👍 One of my favorite song lyrics of all time from Neil Young's Old Man... "It doesn't mean that much to me to mean that much to you". Love the videos & the attitude!
OMG, I love this version of Matt!
Just bought the VE56 from you yesterday and it arrived today-- WOW ! I look forward to trying this baby out.
Funny I just ordered this on Amazon yesterday and will be doing a review. I had the VE51 which got me 1.6 GPM tested using the SG28 and a 3.5 orifice at 900 PSI. It was only $115 and was wall mountable.
Btw... if you take off the side bits, it squeezes in to the bottom shelf of a small IKEA cart. Wrap the cord around the cart, mount a tube / pipe on the side, and you’ve got a decent little wheel around setup.
🤣🤣🤣🤣 the Matty sip count!!!!! That made my day!
As someone in the 23.5-27 year timeframe, I'm very glad Jeff/Tommy/Bryce convinced you on the "progression" model.
Nice video. Since you specifically mention Canadians at rhe end of the vid, I would suggest you focus more on the accessory kit than the pressure washer unit as it is readily available here at Canadian Tire stores under the Simoniz brand. It also regularly goes on sale. I know because I bought one not long ago and I am modifying it just like you did... Just waiting for roads to be cleaned up from salt and crap from winter before I test it. Cheers.
I have had this pressure washer washer for a year. As soon as we buy our next house this year, I can't wait to punt this thing into the woods like an IK foamer, and get set up with a Kranzle unit. It's an ok entry level set up, but it's nothing to aspire to have.
Love it when Uncle Matty starts acting like Bruce Wilis in Armageddon. Just tossing junk to the side while repeating "don't need this"!
I have the CAT pressure washer wich is also made by active I think, Im loving it
I bought the cat to ..when did this come out ?
Im not sure, but is perfect for me for detailing my cars
Totally love this guy huge fan but I do detailing and I’ve putten maybe 8 hours a day 5 days a week for about a year on my Ryobi untill it broke so idk lol but I definitely upgraded bought the Kranzle K1622TS Custom Install Solution and can’t wait !!!!
This has been my favorite Ucle Matty video . 😆 🤣 😂
To avoid all the emails I would suggest putting a piece of paper or colored plastic ribbon between the fittings. It would give people a visual that the piece separates.
33:56 - "The hole makes a difference" words to live by
How much power does it need to power the unit? I have a ryobi 2300 generator Will that work?
Hi Matt thank you for the tutorials. I got the active VE52 from somewhere else bc you were out of stock but I’d like to get that mosmatic sprayer. And change the hose that I have which is the grey jet something I paid over $100, but I think this kind of pressure washer will work better with the one you are showing it looks smaller and I’ll get more pressure. Also what tip of those with rubber should I use. TY OG team.
I’ve grown my business due to massive information dumps like these videos. I truly thank you for what you do and I’ll continue to order the best of the best from your shop! I’m obsessed.
S.O.A.B! My K1700 showed up last night after giving up trying to find something decent at this price point!
Came looking for this comment. I just got one, too.
Um. So. Keep it. Karcher is a well known brand lol.
@@pshhyeahh Yeh, not complaining. Just funny.
I love my K1700. Had it for about a year and use it every week for my wash!
I need a quiet washer. Do you have a feel as to the noise level of k1700 vs the VE52?
We need more dry ice cleaning footage Matt! I beg you, so satisfying
If only Uncle Matty had a water bottle to sip from 🤣😭
4:00 This is basically my wife picking through her salad......all that's left is the lettuce. 🤣
Car Sales Man!
For those in Canada, I can't confirm, but this looks very close to the Simonize Platinum 1800psi compact pressure washer, available at Canadian Tire
Yes it is….
It is. Mine failed after 1.5 years, the pump inside cracked.
This looks exactly like my Simonize 2.0 gpm pressure washer I purchased from Canadian Tire. I wonder if they're the same?
Also CAT
"Well you're not calling us because we dont have a phone number" **Phone rings in the background**
"Don't be Stupid, I'm assuming you're smart!" LOL!!!! I'm dead!!!!
Thank you guys so much for this you cant imagine how essential you are to the industry especially for us newbies 😅.
So i checked your website and came up with the following questions:
1) since its out of stock can you give me a rough estimate on when you will have it in stock again ?
2) Since i dont live in the states do you guys ship overseas to Qatar?
Stay awesome!
Lmao I have ordered quick disconnects from you like 3 separate times and every single time I’m like oh no he forget to send me the male fittings....and it takes me a solid minute to realize they are put together like that 😂
difference in the VE52 and VE56?
38:20 didn't even need to get his wife to come tighten the fitting and fix the leak ! no tears either lol, hilarious
I’m sold on it just waiting for the video to end 😂😂😂
All that and you’ve never used the CAT 1800? I’ve had mine for months, never getting a different one. 1.8 GPM, 980 PSI @ 12Amps. 1180 PSI at 20Amps. Doesn’t trip breakers, $160.
It’s the same one. The Cat was an improved version of this one and now they just made it the same. The Cat is now more expensive, though.
Its the time of the month for Matt
I am using a Ryobi 2300 psi pressure washer with only one serious complaint: the hose. It should be longer and more flexible. I have added quick-release connections for the water supply and wand.
Chevy cavalier versus a Porsche with a boxer engine has to be the best comparison I have ever heard in my life! Maddie keep up the good work!
I got the karcher setup from y’all a long time ago and it’s been great for me I haven’t had a problem! I know it’s pretty low end but it does the job for a weekly wash👌🏽
Just recieved mine in the mail today ! Awesome 👌
Now that I have pressure washer covered, what's the opinion on a de-ionizer/spotless wash systems for someone who is doing detailing as only a hobby?
This seems awfully similar to the
Simoniz Platinum 1800 PSI Compact Electric Pressure Washer sold up here in Canada at Canadian Tire
It is ... CAT too
use this pressure washer for a couple months however, the pump gave out. but now that there's a nice solution from you guys, im tempted to try it once again.
These videos brings me so much joy
Watched this almost a year ago while doing research on what’s the best out there. I got this pressure washer after 8 uses If that! The thing started surging like does not hold pressure still works but just keeps surging while not in use. Seems like Active is taking care of me waiting on a email might be replaced I’ll follow up!
Classic Obsessed Garage video...Tons of truth, mixed with lots of insults and sarcasm!! Keep it coming Matt. We're buying!! 🤩
I mentioned this awhile back in the FB group, but never pull the trigger on the gun without something plugged in, eg wand, foam cannon, nozzle, as you WILL blow out the O-ring. You will never find it, so order extra O-rings.
Matty, once the water outlet is redesigned to the side, I'll buy. On back, no dice on my shelf.
Great video,review and info.
I usually don’t like big ego but you’re hilarious when you do it.
Please keep the videos coming
I just recently purchased the Kranzle 1122TST washing solution. First box already arrived with upgraded wand inlet hose and foam cannon. Just impatiently waiting for the pressure washer now. I’m sure customs to 🇨🇦 will hold it up.