Aspen Hysys Solid Handling

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 18

  • @diegojuan8066
    @diegojuan8066 4 роки тому +1

    Whats up, e-Time. it's fairly vivid video. thanks. :)

    • @chrash786
      @chrash786  4 роки тому

      Went technical... 😂

  • @bushrathrashid8383
    @bushrathrashid8383 4 роки тому +2

    👌👌

  • @muhammadakbarray4001
    @muhammadakbarray4001 2 роки тому

    thanks sir, this video very supporting me

    • @chrash786
      @chrash786  2 роки тому

      I struggled to learn Solid handling first that why i made a video to be useful to others, thanks,

    • @muhammadakbarray4001
      @muhammadakbarray4001 2 роки тому

      @@chrash786 permission to ask sir, whether it can enter the feed inlet velocity on the stream? thanks before sir

    • @chrash786
      @chrash786  2 роки тому

      @@muhammadakbarray4001 i will try , it. If you know the velocity and area of piping you could find the volumetric/ mass flow rate. It might be possible.

    • @muhammadakbarray4001
      @muhammadakbarray4001 2 роки тому

      Can variation for velocity inlet sir?

    • @chrash786
      @chrash786  Рік тому

      @@muhammadakbarray4001 Sorry for a delayed reply. Velocity is depends on the piping size. I believe, if you know the piping size and mass flow, velocity is just apparent.

  • @JK-nz2hz
    @JK-nz2hz 3 роки тому

    how about spray dryer & cyclone & scrubber in hysys plus ?

  • @karimkarim-ww5ii
    @karimkarim-ww5ii 2 роки тому

    please ,can you help me
    How can I enter ejector in aspen hysys
    It is necessary
    thank you

  • @MHOOPAI
    @MHOOPAI 3 роки тому

    When i clicked to calculate PSD, the software says "Failed to create PSD from SPS engine". Do you know how to fix it? Thank you

    • @chrash786
      @chrash786  3 роки тому

      did you define the mesh size properly

    • @chrash786
      @chrash786  3 роки тому

      @@alimchem8565 there is option for user defined sizes too. I use mean ans standard deviation for calculation.

    • @chrash786
      @chrash786  3 роки тому

      @@alimchem8565 Add available PSD in the user defined descrete area. OR use mean diameter and standard deviation with log method. Please give a try.

  • @siddhu017
    @siddhu017 3 роки тому

    How to simulate spin flash dryer? because air inlet pressure value is -ve draft. But aspen not taking air -ve value.

    • @chrash786
      @chrash786  3 роки тому

      Let me try, will update you..