Hi there, thank you for your videos. I got BMW B7 E65 2008, has misfire in one side of the engine 😢 cycling 1,2,3 &4 please advise the car has only 59000 miles
Actually you need a good oscilloscope to catch that . BMW uses fuel cut off to protect the cat media . Even with the scope they’re very tricky to diagnose.
Great video, thanks! I have a problem where i have no ignition at all (2005 e53 3.0i). The engine cranks, and i can smell unburned fuel in the exhaust. In INPA, is there a way to test the ignition circuits when I crank the engine? Thanks if you can help me!
My 2004 545i shakes and vibrates on cold start at idle, I got misfire on various cylinders with the scan tool but no check engine light, after few minutes, the car stops shaking/vibrating. I did valve cover gasket and spark plugs, what can cause this shaking/misfire. I have also noticed that when I pull the oil dipstick out, car shuts down, is this normal ? Thank you
Hi there, thank you for your videos.
I got BMW B7 E65 2008, has misfire in one side of the engine 😢 cycling 1,2,3 &4 please advise the car has only 59000 miles
Actually you need a good oscilloscope to catch that . BMW uses fuel cut off to protect the cat media . Even with the scope they’re very tricky to diagnose.
Great video, thanks! I have a problem where i have no ignition at all (2005 e53 3.0i). The engine cranks, and i can smell unburned fuel in the exhaust. In INPA, is there a way to test the ignition circuits when I crank the engine? Thanks if you can help me!
My 2004 545i shakes and vibrates on cold start at idle, I got misfire on various cylinders with the scan tool but no check engine light, after few minutes, the car stops shaking/vibrating. I did valve cover gasket and spark plugs, what can cause this shaking/misfire. I have also noticed that when I pull the oil dipstick out, car shuts down, is this normal ? Thank you
Did you ever solved the issue I hope you did🙏🏽
I had similar problem with cylinder one but only on cold start. After engine got hot,error code never come back.
Very helpful information
Hi, could you help me getting these software?