Hello Hillcreek, GREAT Videos!! Hoping you can help me out? I have the same vehicle as you, with canvas doors installed. Have you looked into side mirrors? I tried a set but the passenger side is not viewable from the drivers seat. I don't want to mount on the canvas doors since I will be removing them probably in the summer. The stock mirror bracket is too short. Maybe you know of a brand that can accommodate? Any suggestions? Thank you in advance!! John....
John, I have been researching this same question. I have seen brands that mount on the doors where the latch is but I feel it would be hard to see. I’m not sure how well the doors would seal if ones would mount on the frame. Unfortunately, I don’t have an answer for you as I’m still trying to figure it out. If you or anyone else has any ideas I’m all ears! I will try and find a brand to review but I want to be happy with it before I share. Thanks!!!
Thank you for the info! I found this video ua-cam.com/video/RbirNYrLp-U/v-deo.html I sent them a message but haven't heard back yet. Maybe you also can contact them and do a product review? I was really hoping for a solid mount onto the pro frame so I can still have side mirrors in the event I take off the doors temporarily. Again, THANK YOU for all your informative videos!! Great job!!! John....
No I have never put car seats in the back. It should tighten up well with the seat belt, might take you putting all your body weight in the car seat until you get the slack out.
I love all the accessories you can get for the Ranger. They are all great too. I have had only one issue with the roof. Due to it being a crew cab, it has two parts. The seals from the factory aren’t the greatest and it would leak. So I had to reseal on my own and now I have no issues.
@@JamesWhite-tg4kw it was from the factory, a part of the Polaris lock and ride system. www.polaris.com/en-us/shop/off-road/accessories/roofs/ranger-roofs/2889223/
We purchased the doors from the dealer. Check out the following videos for more information! You can’t go wrong with these doors. ua-cam.com/video/vRfr76GqwDA/v-deo.html ua-cam.com/video/5ItyLrq97O8/v-deo.html
Great video man! My 1000 crew just arrived at the dealership actually. Is there any chance you could do me a GIANT favor? Can you measure from the very front to the back of the rear wheel? Reason I ask is my trailer is a 12' trailer and the specs say the machine is 152" long, which is obviously longer than 12 feet. BUT, I think if i back it on, the bed SHOULD hang over the front of the trailer, allowing the back wheels to butt up against it, allowing it to fit. I asked my salesman if he could do this and he gave me a handful of excuses. I would do it myself if I had access to this particular vehicle, and the one I am picking up is quite the hike. If you cant, no big deal but man Id really appreciate it. Im stressing over this lol. Thanks man!
Thanks, I’m glad you enjoyed! Congratulations on the new ranger!!! The measurement you requested is 142”. You should have a couple inches to play with but it will be tight.
@@hillcreekoutdoors Man that is great to hear!! Thank you! So there technically should be about 10" overhang on the bed then? So glad I dont have to find another trailer.
The doors seal extremely well considering how quick and easy they are to remove. We have driven in numerous rain storms from light rain to heavy. You won’t get wet… I’ll be doing a review soon on just the doors! Check out our other video “2022 Polaris Ranger Accessories-tips to customize and update xp 1000” for more information until door review. Thanks
Hello Hillcreek, GREAT Videos!! Hoping you can help me out? I have the same vehicle as you, with canvas doors installed. Have you looked into side mirrors? I tried a set but the passenger side is not viewable from the drivers seat. I don't want to mount on the canvas doors since I will be removing them probably in the summer. The stock mirror bracket is too short. Maybe you know of a brand that can accommodate? Any suggestions? Thank you in advance!! John....
John, I have been researching this same question. I have seen brands that mount on the doors where the latch is but I feel it would be hard to see. I’m not sure how well the doors would seal if ones would mount on the frame. Unfortunately, I don’t have an answer for you as I’m still trying to figure it out. If you or anyone else has any ideas I’m all ears! I will try and find a brand to review but I want to be happy with it before I share. Thanks!!!
Thank you for the info! I found this video ua-cam.com/video/RbirNYrLp-U/v-deo.html I sent them a message but haven't heard back yet. Maybe you also can contact them and do a product review? I was really hoping for a solid mount onto the pro frame so I can still have side mirrors in the event I take off the doors temporarily. Again, THANK YOU for all your informative videos!! Great job!!! John....
@@johnm5544 yes, I have seen this video and it looks like a great product. I will have to reach out to them. Thanks!
Do you ever put car seats in the back? I just recently bought a ranger and am trying to find a better way to secure a car seat for my toddler. Thanks
No I have never put car seats in the back. It should tighten up well with the seat belt, might take you putting all your body weight in the car seat until you get the slack out.
@@hillcreekoutdoors thank you!
So how do you like the Polaris roof and windshield and other accessories
I love all the accessories you can get for the Ranger. They are all great too. I have had only one issue with the roof. Due to it being a crew cab, it has two parts. The seals from the factory aren’t the greatest and it would leak. So I had to reseal on my own and now I have no issues.
@@hillcreekoutdoors so what brand was it
@@JamesWhite-tg4kw it was from the factory, a part of the Polaris lock and ride system.
www.polaris.com/en-us/shop/off-road/accessories/roofs/ranger-roofs/2889223/
Where did you get them doorsAnd do you like them
We purchased the doors from the dealer. Check out the following videos for more information! You can’t go wrong with these doors.
ua-cam.com/video/vRfr76GqwDA/v-deo.html
ua-cam.com/video/5ItyLrq97O8/v-deo.html
Great video man! My 1000 crew just arrived at the dealership actually. Is there any chance you could do me a GIANT favor? Can you measure from the very front to the back of the rear wheel? Reason I ask is my trailer is a 12' trailer and the specs say the machine is 152" long, which is obviously longer than 12 feet. BUT, I think if i back it on, the bed SHOULD hang over the front of the trailer, allowing the back wheels to butt up against it, allowing it to fit. I asked my salesman if he could do this and he gave me a handful of excuses. I would do it myself if I had access to this particular vehicle, and the one I am picking up is quite the hike. If you cant, no big deal but man Id really appreciate it. Im stressing over this lol. Thanks man!
Thanks, I’m glad you enjoyed! Congratulations on the new ranger!!! The measurement you requested is 142”. You should have a couple inches to play with but it will be tight.
@@hillcreekoutdoors Man that is great to hear!! Thank you! So there technically should be about 10" overhang on the bed then? So glad I dont have to find another trailer.
@@kdsberman correct! 😄
@@hillcreekoutdoors Thank you so much, you really helped me out big time!
hello bro how much horsepower is the car
82 hp
how well do thedoors seal
The doors seal extremely well considering how quick and easy they are to remove. We have driven in numerous rain storms from light rain to heavy. You won’t get wet… I’ll be doing a review soon on just the doors! Check out our other video “2022 Polaris Ranger Accessories-tips to customize and update xp 1000” for more information until door review. Thanks
In most states, children must be 12 years of age or older to ride as passengers in a side by side