How To Replace The Blower Motor On A Mercedes-Benz E350, E63 AMG, E500, & More (W211)

Поділитися
Вставка
  • Опубліковано 15 гру 2024

КОМЕНТАРІ • 176

  • @AlexHernandez-xh8ei
    @AlexHernandez-xh8ei 4 роки тому +43

    W211 interior just stunning till this day

    • @fcpeuro
      @fcpeuro  4 роки тому +1

      It has aged well Alex

  • @jianliu7516
    @jianliu7516 Рік тому +2

    Best video to help the car owners save money. My E500 needs to replace the blower motor soon because it make big noise when I turn on the AC. This video save me a lot of time , I will follow your video remove the motor clean up and Lub the motor first , if still noisy I will replace a new one.

    • @fcpeuro
      @fcpeuro  Рік тому

      Thanks for watching!

  • @gabeg962
    @gabeg962 4 роки тому +12

    This guy gives clear and detailed instructions. I like the way he gives his helpful input on the work he's doing, which you can tell comes from his experience.

    • @fcpeuro
      @fcpeuro  4 роки тому +1

      Thanks Gabe G, Kyle has a lot of experience working on these cars giving him a wealth of knowledge he had to learn the hard way at some point ^.^

  • @janantoni3604
    @janantoni3604 3 роки тому +3

    Very intelligent user friendly mechanic.Great teacher.Thanks for step by step video.

  • @jimmurtha6733
    @jimmurtha6733 Рік тому +1

    Great instructional video. I have a 2008 E 350 with a squeaky HVAC blower. Took it out, greased the bearings, put it back in. No squeaks. Work took a little longer as it was my first time but it was as shown in the video. Saved me over $600 for a dealer-replaced job.

  • @mrmarshall191
    @mrmarshall191 2 роки тому +1

    Kyle your the shit. Mercedes Benz Gurú. My w211 would not be what it is now, if it were not for your professionalism and knowledge on these vehicles. Much Love.

  • @CrazyUncleChris
    @CrazyUncleChris 2 роки тому +3

    What an absolute perfect video! You're a great teacher sir. And I love that Mercedes are so easy to work on; this same job on a Dodge Durango is a 6 hour job.

  • @josephfili8003
    @josephfili8003 2 роки тому +1

    Yes an excellent video. Every thing was covered perfectly. My friend was quoted $2,000.00 to do this job! Now I can help him out.

    • @fcpeuro
      @fcpeuro  2 роки тому

      Thank you for watching; you are a good friend Joseph!

    • @htwnvera
      @htwnvera 6 місяців тому

      That’s ridiculous

  • @joanneeaves8561
    @joanneeaves8561 3 роки тому +1

    Thank you for the video. I just replaced my blower. I paid about $175.00 for the parts and it took me about 20 minutes to complete the job. The video was perfect!!

    • @fcpeuro
      @fcpeuro  3 роки тому

      Hopefully you were able to get the parts from us! Happy to help, and glad it was a quick and easy DIY for you Joanne!

  • @felixorlando1263
    @felixorlando1263 Рік тому

    Great video- had watched several others until I stumbled unto this one. Professional, to the point, no extra fluff or nonsense. Kyle is exceptional, knowledgeable not like all the other UA-cam wanna-be stars.

  • @Okie-Tom
    @Okie-Tom 4 роки тому +7

    Very good video. Shows just how to do it.
    I wish you would do a video on how to completely bleed the brakes and SBC on a 2004 E500 with the SBC brakes! I need to replace all my fluid. Thanks, Tom

  • @tikutiku2368
    @tikutiku2368 4 роки тому

    Awesome! This video settles a dispute with some who state it's A/C compressor sitting where the blower is. Thanks for this vital info.

    • @fcpeuro
      @fcpeuro  4 роки тому +1

      Did we win you any money? Perhaps an adult beverage?

    • @tikutiku2368
      @tikutiku2368 4 роки тому

      @@fcpeuro We get another subscription as prize. We have watched the video again and FCP Supreme Court has ruled.

  • @elton76singh
    @elton76singh 9 місяців тому

    I'm amazed by this guy! Definitely on point with his knowledge and explanation.

  • @vguitarman
    @vguitarman 3 роки тому

    Just picked up an '05 E55 and I'm very thankful for these vids. Looking forward to more W211 content.

    • @fcpeuro
      @fcpeuro  3 роки тому

      We're thankful for you too Vyasa, thanks for watching!

  • @PrinceKey1
    @PrinceKey1 4 роки тому +6

    Amazing videos and content from FCP Euro!!!!

    • @fcpeuro
      @fcpeuro  4 роки тому +1

      Thanks Mickeevn appreciate the support

  • @marelygino4012
    @marelygino4012 7 місяців тому +1

    Dude your video ARE SO FREAKIN USEFUL. Great amount of detail . Im about to replace mine 🚶🏻

  • @MisterCharlesL
    @MisterCharlesL 3 роки тому

    GREAT video! Me and my teenage son knocked this out in about 45 minutes. THANKS!

  • @ZoSkiLuv
    @ZoSkiLuv 4 роки тому +5

    Looks like you forgot to plug in the light on the kick panel. GREAT video!!

    • @fcpeuro
      @fcpeuro  4 роки тому +1

      Good catch! Glad you like the video, Alonzo!

  • @jameshay469
    @jameshay469 3 роки тому +1

    Brilliant video, straight to the point and not too much waffle, thank you! My W219 CLS has the chirping sound, I was worried the motor/fan would be buried behind the dashboard but I'm relieved it's easy to access.

  • @danzimmermann9122
    @danzimmermann9122 4 роки тому

    Thanks for this video and the quality parts. I was able to do this job in 45 min on my W219 this morning. No more squeaks or burnt oil smell.

    • @fcpeuro
      @fcpeuro  4 роки тому

      That's awesome, Dan! Happy to help!

  • @ijjiops
    @ijjiops 4 роки тому +9

    Mine literally just started making noise! Perfect timing

    • @fcpeuro
      @fcpeuro  4 роки тому

      We could sense it Gagyourself, thats why we posted this video... Be sure to checkout the link to the kit in the description if you hadnt already, it has everything you need!

    • @M3LKS
      @M3LKS 4 роки тому +2

      If its just squeaking/chirping then just drop some oil/wd40 on the bearings, no need to replace the motor. I did that only once and haven't had any noise since (20k km and counting)

  • @gregkates4013
    @gregkates4013 8 місяців тому

    This video was really helpful, I watched the video and I was able to replace my blower

  • @leonforte7139
    @leonforte7139 Рік тому

    Good Job with Your demonstrating how to Replace and install the Blower and the Resistor ,now I have more Confidence to replace mind 🎯😎🎯

  • @keytothegate68
    @keytothegate68 Рік тому

    Thank you! Very good video and very helpful with details ! As I recall when I replaced the fan in my Dodge van years ago the hardest part was being upside down looking up to remove the screws. Get comfortable to prevent backaches. My fan in the W211 chirps in turns so it will be a soothing relief when I replace it.

  • @AbdulrahmanHadid
    @AbdulrahmanHadid 4 роки тому +3

    awesome series

  • @cnfusd
    @cnfusd 4 роки тому +4

    love these videos FCP! keep it up!

    • @fcpeuro
      @fcpeuro  4 роки тому +2

      We've got plenty in the hopper Charles, stay tuned.

  • @ilhommuminov708
    @ilhommuminov708 2 роки тому

    Can you just install without a new resister if you change the blower engine part itself?

  • @MrYo69nas
    @MrYo69nas Рік тому

    Very professional and without any annoying loud music. Thank you for the clear instruction and helpful tips.
    Where is the fuse for the blower motor?
    My climate control lights and all the buttons work but no cold or hot air comes out when you push the buttons, the windshield defroster does not work, no air but the rear defroster works when you push the button, by that I figured the buttons/control panel is good. So, does anyone have any idea what is going on??
    Should I just change the blower?
    Or maybe is it a fuse to the blower?
    This happens after I jump start my battery.
    I'm thankful for any help🙏

  • @rodney12314
    @rodney12314 4 роки тому +1

    my man again with th w211 videos keep em comin

    • @fcpeuro
      @fcpeuro  4 роки тому

      We've gotchyou R M, more to come!

  • @dandrrebuilds8912
    @dandrrebuilds8912 Рік тому

    Is the w210 and the w211 essentially the same set up? I have a 96 and the mechanic said that the blower motor is bad. I never heard the bearings making any noise before it went out though

  • @rayadams8542
    @rayadams8542 3 роки тому +1

    When I do plumbing replacements I take a photo of the part to remember which way it goes etc

  • @hectorboyar4321
    @hectorboyar4321 2 роки тому +1

    Love this video man!! Great and Imma save some money!!

    • @fcpeuro
      @fcpeuro  2 роки тому

      Save that money!!

  • @Idlewanderer
    @Idlewanderer 4 роки тому +1

    Great series on the W211. Thanks. Is it possible for you to create a video to flush the fluid in the SBC system? Mine needs doing. Thanks again from Australia.

    • @fcpeuro
      @fcpeuro  4 роки тому +1

      Thanks for watching, Idlewanderer! Stay tuned as we have more W211 content coming!

  • @Ineversayanything
    @Ineversayanything 2 роки тому

    Incredible video! Smart, thorough and to the point. Thank you!!

    • @fcpeuro
      @fcpeuro  2 роки тому

      Glad you enjoyed it!

    • @awangabdrahman986
      @awangabdrahman986 Рік тому

      Very relax n confident man…
      Good job n clear instructions..
      Keep up brilliant teacher

  • @ponce8174
    @ponce8174 3 роки тому

    What does the resistor does? And how I know is bad ? I have a E350 thanks

  • @speedracer8311
    @speedracer8311 3 роки тому

    Is this similar for a 2010 GLK350?

  • @jaycollins6778
    @jaycollins6778 Рік тому

    This is the only video close to my question that I found but I have a 2009 E-350 that has an odor when I first turn on my heat/AC…I replaced the cabin and Intake filters and I can’t seem to remove that initial odor…it seems to go away after a few minutes but starts all over after turning the car off for a few hours! Please Advise? Thanks!

  • @Dillonyowell
    @Dillonyowell 3 роки тому

    My w211 just stopped blowing out all together. Is it just the resistor or the blower motor or is it beat to just replace both.

  • @victorabdulai8650
    @victorabdulai8650 3 роки тому

    Thanks for your videos.. they are educative .... How do I locate the crankshaft sensor on a W211, M272 engine .... What part is it located??

  • @uzzle21
    @uzzle21 3 роки тому

    do some blower motors come with the resistor already attached

  • @stevenonyoutube
    @stevenonyoutube 9 місяців тому

    Great instructions. The link for the kit seems like it no longer works, and I couldn't find the resistor part on the site.

    • @fcpeuro
      @fcpeuro  9 місяців тому

      Hi Steve, sorry for that. The blower motor can be found here: www.fcpeuro.com/products/mercedes-blower-motor-nissens

  • @TigreBrian
    @TigreBrian 2 роки тому

    Kyle, excellent work Sir! Clearly explained, useful insights and tips, and expertly executed. A little more light, and maybe a few more close ups (even if it is just a photo with arrows) to illustrate the location of certain fasteners and items. But overall an excellent, useful video, and I did buy the heater assembly from FCP, due to your video. So, thank you to you and FCP for supporting the DIY'ers.

  • @SsgtHolland
    @SsgtHolland 4 роки тому +1

    Great video, very well lit and demonstrated!

    • @fcpeuro
      @fcpeuro  4 роки тому

      Glad you liked it! Hope it was helpful!

  • @jimmybauerthelegend
    @jimmybauerthelegend 2 роки тому

    Hello there, I'm having some issues with this matters. Now, I don't know exactly what is not working if it's the blower motor or the resistors, something that I would need to check with the technician mechanic first. My question to you since you used FCP EURO parts, are they good quality parts for my e350 3010 mercedes and what price range am I'm looking at and if it's necessary to replace all parts even though if it's only one part with the problem, let's say the blower motor? I appreciate the response thank you.

  • @stuartapperley8960
    @stuartapperley8960 2 роки тому

    Hi Kylie
    Could you please advise if the MB E63 AMG w211 2007 AC Heater Blower Motor Fan Assembly J146 will fit and work in my W211 E200K 2007 Sedan. I am in Australia so its RHD I have sourced this part in Aust second hand and working. Love your vids and hope you can help me Cheerz Stuart😁

  • @nateward1007
    @nateward1007 4 роки тому

    Is there any clear cut way to tell what needs to be replaced, the resistor, or the blower motor?

  • @allisonoteri1963
    @allisonoteri1963 3 роки тому

    Well changing the regulator increase the speed of the air coming out of the vents or is putting in a new motor good enough? I have the squeaking noise so I know the motor needs changing but would like to save money if I don’t have to change the regulator

  • @ED-nc2uv
    @ED-nc2uv 3 роки тому

    Thanks for the video, my AC is blowing on full but also is you take the ignition key out. Is this a resistor or a relay problem? Not being able to reduce the speed points at resistor failure, being stuck on all the time points at relay, any advice, tips or comments? thanks in advance

  • @wendellscales2933
    @wendellscales2933 2 роки тому

    Thank so much great video I really appreciate your videos keep them coming again great job

    • @fcpeuro
      @fcpeuro  2 роки тому

      Thanks for the love, Wendell! More to come.

  • @BennyTygohome
    @BennyTygohome 3 роки тому

    Thank you. I thought i was going to have to pull steering wheel and dash just to access the blower motor so i kept putting this off. This should be easy by comparison.
    Great video. If my fan isn't always working (works about 50% of the time) is that likely just the regulator/resister? I may buy the kit anyways. Seems fair price

  • @JoseOrtiz-xs3dh
    @JoseOrtiz-xs3dh 3 роки тому

    Weher do i find the air condition fuse or relay on a e500 2003

  • @shawna7813
    @shawna7813 4 роки тому

    I have an 06 and there's little to no air pressure coming from the vents unless I turn the blower lever to the max. Most of the air seems to come from the bottom of the car and not the vents on the dash regardless of adjustments. I'm wondering if it's the blower motor?

  • @ponce8174
    @ponce8174 3 роки тому

    Thanks for all the videos that you do for us that owns benz you save us alot of $$$$$$$ 👍👍👍👍👍👍

  • @amirazmanpokpsdphajiabdulr6711
    @amirazmanpokpsdphajiabdulr6711 3 роки тому

    I have a W211 2003 Model..whenever I switch on the aircond, theres nothing happening..not even air coming out. I open the hood and found that the aircond pipe freezes. Not sure if its the blower problem.. but I can see theres water trapped around the thing like a small battery underneath the filter... appreciate if you can suggest to solve the problem. Very good vid btw

  • @mehmetdogu384
    @mehmetdogu384 4 роки тому

    i have engine light on even if i sorted out intake manifold control. before car was not accelerating. but once i put resistor on 2nd and 3rd points, everything was fine with good accelearation but engine light did not go. what do you think this might be? i appreciate your advice. thanks in advance..

  • @FERMIN11211
    @FERMIN11211 Рік тому +1

    Great video looking foward to change mine this weekend

  • @David-kk4dr
    @David-kk4dr 3 роки тому

    Thank you for your demonstration. It helps me replace my own.

    • @fcpeuro
      @fcpeuro  3 роки тому

      You are welcome! Glad you're finding it helpful!

  • @ronmoret7420
    @ronmoret7420 4 роки тому

    Hello would this apply the same for a 2007 E320 where the blower only works intermittently? Great video! Thanks

    • @fcpeuro
      @fcpeuro  4 роки тому

      Hi, Ron. Yes this should be the same process!

  • @carlhenrikandersson8761
    @carlhenrikandersson8761 4 роки тому

    Is this a OEM parts for blower and restor ? ,black and red cable to the motor seems not to be the orginal parts, should be brown and red !

  • @petercampbell264
    @petercampbell264 3 роки тому

    My blower works fine, but when you put the car on defrost, nothing comes out at the windshield. Any ideas?
    Thanks

  • @thelifeofanordinaryman474
    @thelifeofanordinaryman474 3 роки тому

    Hello kyle
    Iam from india and bought a w211 E200 kompressor model and i have issue while idling engine the car shivers and rpm gauge goes down below 10 could pls help me find the solution for this

  • @nag5458
    @nag5458 4 роки тому +2

    Good job! :) Will there be more repairs on this model? It would be nice to have something to help during the repair of my e500.

    • @fcpeuro
      @fcpeuro  4 роки тому +1

      Nag (not saying youre being a Nag), we will for sure be having more W211 repairs on varying models, including an e500.

  • @kenreese2791
    @kenreese2791 2 роки тому

    i wonder if the cabin air filter being installed incorrectly caused the blower motor to go bad ???

  • @mohamadelhaybi320
    @mohamadelhaybi320 Рік тому

    Im Mohamad from Lebanon , my car is mercedes benz w211 , 2003 .
    A foul smell that suddenly appears when driving a car. what is the reason? please.

  • @selaudinagolli4638
    @selaudinagolli4638 3 роки тому

    With your help I just changed the module of the blower motor by myself for 10 euro, instead of replacing it all for maybe 100 euro. Thanks!

    • @selaudinagolli4638
      @selaudinagolli4638 3 роки тому

      forgot to mention AC wasn't working at all, not it works flawlessly xD

    • @MrYo69nas
      @MrYo69nas Рік тому

      Do you have any idea where the fuse is for the blower motor? Mine does not blow cold or hot air after a dead battery jump start. Thanks for your help.

  • @joshualeal8969
    @joshualeal8969 4 роки тому

    Do you know what that plunger is for

  • @vidsforsquids
    @vidsforsquids 4 роки тому

    Excellent!!
    It would be awesome to know about W211 LED bulb replacements. Not necessarily replacing the whole bi-Xenons headlights, but more the front yellow parking lights and trunk area lights on E-wagons. Thanks again for the great info 👍🏼

    • @fcpeuro
      @fcpeuro  4 роки тому

      vidsforsquids we have something coming your way , it will cover all the basic maintenance and DIY's. Just give us some time!

    • @vidsforsquids
      @vidsforsquids 4 роки тому

      FCP Euro Looking forward to it. Thanks for everything ⚡️

  • @ulyse44
    @ulyse44 Рік тому

    Great job👍

  • @shabeermahar5898
    @shabeermahar5898 Рік тому

    Awesome, very brief 😎.

  • @ELWIN225
    @ELWIN225 4 роки тому +1

    As a loyal FCP client may I ask for a
    Power steering pump replacement DIY on w211 E63? :)

    • @fcpeuro
      @fcpeuro  4 роки тому

      We'll have a chat with Kyle and see how his personal E63 is doing in the p-steering pump department :)

  • @joecapriotti6366
    @joecapriotti6366 4 роки тому +1

    Super helpful! Thank you!!

    • @fcpeuro
      @fcpeuro  4 роки тому

      Glad it was helpful, Joe!

  • @Ladyvirgo007
    @Ladyvirgo007 2 роки тому

    My fan just went out in my 2008 e350 benz and I really want to try this but I’m a little nervous 😬

    • @fcpeuro
      @fcpeuro  2 роки тому +1

      You can do it! 😎

    • @Ladyvirgo007
      @Ladyvirgo007 2 роки тому

      @@fcpeuro I did it it’s working. I just want to say thank you so much for this video and I wish I could like it a million times thank you so much.

  • @Aite_foo
    @Aite_foo 2 роки тому +1

    Thank you 🙏

  • @mosheweisz1087
    @mosheweisz1087 4 роки тому

    Would this process be similar on a glk350

    • @fcpeuro
      @fcpeuro  4 роки тому

      Hi Moshe, the GLK being an SUV would be different. However, it might be a similar process.

  • @richiesmad2327
    @richiesmad2327 3 роки тому

    Thank you, i have do one tomorrow... Peace

  • @robertballesteros1002
    @robertballesteros1002 2 роки тому

    good information

  • @donnyfoster1859
    @donnyfoster1859 2 роки тому

    My heat and my AC takes a while to turn on , when it turns on it’s only on for few mins then dies off again. It’s getting real hot out by time I get to work I’m dripping sweat I need to find the issue it’s driving me nuts

  • @IKhanNot
    @IKhanNot 4 роки тому

    Hello. Would this procedure be the same on a 2012 C300 W204? The blower fan has started to chirp when the heat is on and the fan is set to lower speeds. I've changed out the cabin air filter before and it generally looks to be the same on mine as the E Class.

    • @fcpeuro
      @fcpeuro  4 роки тому

      Since it is a different chassis, there are differences, however, it is a similar process on both vehicles.

  • @wrendooley
    @wrendooley Місяць тому

    I bought a car that the blower motor caught fire so there’s melted plastic when it goes I’m kinda stressed on how I should go about this stuff I have a feeling I’m gonna struggle getting t things out because it’s melted

  • @ATAMasterShake
    @ATAMasterShake 4 роки тому

    I have enjoyed the W211 videos. I could be wrong but looks like you might of forgotten to plug in the light before putting the upper foot trim piece back in.

    • @fcpeuro
      @fcpeuro  4 роки тому +1

      😳brb (giving Kyle a verbal lashing). If thats the case good eyes, we will note it in the descript if so.

    • @ATAMasterShake
      @ATAMasterShake 4 роки тому

      @@fcpeuro No verbal lashing is necessary. Just a very attention to detail viewer enjoying your content. I ordered my blower motor kit as well. The noise is taking away from my experience driving my W211 😉

  • @John-ip4hs
    @John-ip4hs 4 роки тому

    thank you for put this together.

    • @fcpeuro
      @fcpeuro  4 роки тому

      No problem John hope you found this DIY helpful!

  • @calebhill2410
    @calebhill2410 2 роки тому

    I was wondering if someone can help me out, I bought the capacitor and blower motor from fcp and swapped it and it had been working perfect until about a week ago it takes the blower motor a little bit to “rev up” what do you think the issue could be?

    • @fcpeuro
      @fcpeuro  2 роки тому

      Hi Caleb, you may want to check your wiring and ensure that is all proper, as well as make sure the cage on the blower is not binding up anywhere.

  • @all_obi
    @all_obi 4 роки тому

    How can I get you to ship me original parts ..

  • @eturk1
    @eturk1 3 роки тому

    Why are there no carbon filters on the left?

    • @tskichannel2302
      @tskichannel2302 3 роки тому

      The under dash carbon filters were an option so many - perhaps most - US spec W211s and S211s don’t have them. The cabin filter is under the hood right next to the firewall. For models with the Aux battery, it is right over the Aux battery.

  • @glasser2819
    @glasser2819 4 роки тому

    another great video to repair this scheduled failure.
    My blower has been bad since new... the 2x sleeve bearings were purposely dry so I just lubed 'em... Bosch quality 😅

    • @yogib37
      @yogib37 4 роки тому

      well when I got my w124 my blower motor was not even working.

  • @Fanzindel
    @Fanzindel Рік тому

    Link to parts doesn’t work anymore, can you please update to the correct kit? Thanks!

    • @fcpeuro
      @fcpeuro  Рік тому

      Hi Fanzindel, that can be found at www.fcpeuro.com/products/mercedes-blower-motor-assembly-acm-2119062300, or by using the My Garage tool on FCPEuro.com!

  • @3ltutuperro185
    @3ltutuperro185 4 роки тому

    Hi I want to know if 2008 E63 front 18X8 and rear 18X9 wheels will fit in my 2008 e350 4matic #w211

    • @fcpeuro
      @fcpeuro  4 роки тому

      It should fit, but hey, if it rubs, it'll eventually clearance itself 😂

  • @zuti071
    @zuti071 4 роки тому +1

    And how much $$$ for parts and labor ?

    • @fcpeuro
      @fcpeuro  4 роки тому

      Here is the kit: www.fcpeuro.com/products/mercedes-blower-motor-replacement-kit-nissens-2048200008-kit-2048200008kt
      and Labor is free if you do it yourself! You can either follow the instructions in the video above, or in the written DIY here: blog.fcpeuro.com/how-to-replace-blower-motor-mercedes-benz-w211-e350-e63-amg-e500

    • @zuti071
      @zuti071 4 роки тому

      @@fcpeuro Thx for the info and link for FCP

  • @harborelectric4543
    @harborelectric4543 8 місяців тому

    How do you know if the blower motor is bad???... Say for instance, my ac isn't coming on, nor does the cooling fan come on...Cls 550 (219), 2008..., It runs hot, changed cooling temp sensor, ambient air temp sensor, checked relays, fuses.........

  • @badrazzane4412
    @badrazzane4412 4 роки тому +1

    yeeesssssssssssssss siir w211 for ever broooo

  • @pravinovosadjanin
    @pravinovosadjanin 6 місяців тому

    Nice took me 10 mins amazing they asked 150 eur to replace

  • @curiousottman
    @curiousottman 4 роки тому

    I’ve had my w211 so long I’ve changed the blower motor twice. Would have been nice to have this video prior.

    • @fcpeuro
      @fcpeuro  4 роки тому

      Wow, jaydee, did you buy your W211 new? Hopefully, this video will be useful for the next time you replace the blower motor!

    • @curiousottman
      @curiousottman 4 роки тому +1

      FCP Euro : almost new. I have an 07 e63 and have had it since 08. I stopped buying cheap Chinese blower motors a decade ago since you never know what you’re going to get! Next time mine fails I’ll order your kit.

  • @antoinethompson535
    @antoinethompson535 4 місяці тому

    Thanks bro you da best but it took me 1hour lol it started raining

  • @christopherdoty6987
    @christopherdoty6987 3 роки тому

    where is the fuse?

  • @reggiejones9639
    @reggiejones9639 2 роки тому

    SO IS IT MY BLOWER IF THE AIR FEELS LIKE ITS BLOWING BUT IT REALLY ISN'T

    • @fcpeuro
      @fcpeuro  2 роки тому

      Hi Reggie, that would be a great place to start and diagnose.

  • @champstar9669
    @champstar9669 4 роки тому

    A while back, I had a mouse or something build a nest or whatever and it clogged up the blower with a bunch of debris. Made the fan noticeably loud. Mercedes cleaned it for free as part of an oil change, but said I'd have to pay the next time. Now the same thing is happening again. If anyone knows how I can clean the debris out simply, I'd appreciate it. I can remove the cabin filter on my own, but can't figure out how to access the blower. No UA-cam video on it for my vehicle. 2018 GLA AMG 45. There is an airbag or 2 in that general area, so I'm concerned about messing around and causing damage.

  • @fuffoon
    @fuffoon 7 днів тому

    Don't replace it until you have cleaned the original. The OEM is awesome quality and extremely expensive. Very often , they are just filled with soot. Put the plastic case in your dish washer and use electrical contact cleaner and canned air to blow out the soot from the Bosch blower motor.

  • @UbieoneKenubie
    @UbieoneKenubie 4 роки тому

    this dude should work for donut media!

  • @peppermintcupchronicles923
    @peppermintcupchronicles923 4 роки тому

    When installing a blow motor so u have to install the engine mount as well

    • @NewShockerGuy
      @NewShockerGuy 3 роки тому +1

      Best practice is to remove the entire engine in order to get to the blower motor.

  • @yogib37
    @yogib37 4 роки тому

    a lot easier to change the blower motor and resistor on the w211 then the w124. Holy cow that was a pain in the butt. so much stuff you need to remove including the wiper motor assy. and removing the resistor is really a pain.

    • @fcpeuro
      @fcpeuro  4 роки тому

      It really is a lot easier on the W211 than a W124!