Honda Element-- How to Replace Window Regulator Motor 2003-2010

Поділитися
Вставка
  • Опубліковано 6 лис 2020
  • Step by step how to replace the window motor regulator track in a 2003, 2004, 2005, 2006,2007,2009,2010 Honda Element.
    Driver Side Window Regulator --- amzn.to/358soIZ
    Passenger Side Window Regulator --- amzn.to/3k97fCS
    Door Panel Clips --- amzn.to/36tZ935
  • Авто та транспорт

КОМЕНТАРІ • 59

  • @64arguz
    @64arguz Рік тому +5

    I fixed mine following your indications , excellent video, thanks !

  • @OkieBobby
    @OkieBobby 2 місяці тому

    Fixed the drivers side window regulator today. I watched about three videos before finding yours. Glad I kept searching, since yours was the best for my situation. All I had to do was just follow your lead. Many thanks!
    FYI: Dealer quoted $500. Thanks to you and others like you, it ended up only costing about $50 in parts.

  • @davidhayslip4688
    @davidhayslip4688 3 роки тому +5

    This was so well done. Whoever you are, may all the gods bless you.

    • @DykeHensen
      @DykeHensen 2 роки тому

      Excellent DYI video- thanks - saved me a lot of time

  • @edyoungblood6826
    @edyoungblood6826 Рік тому +3

    Solid video! Made the replacement super easy and I felt a lot more confident going in!

    • @DIYHonda
      @DIYHonda  Рік тому

      Thanks so much! Much appreciated! 🤙🏽

  • @glendepasse7490
    @glendepasse7490 3 роки тому +10

    I replaced this unit on my Element today and watched four videos just to make sure I knew what I was doing. DIYHonda was the best. Everybody else totally missed the step to plug in, power up.. then position the window holes, unplug, bolt the window in, secure the door panel pieces and relax. Thank you DIYHonda!

  • @todayu
    @todayu 10 місяців тому

    Life saver! I was halfway through a 10 hour road trip when my motor decided to give out...while the the window was ALL the way down. No way I could drive 5 hours in that condition. Thankfully, I was parked at a Flying J so I was able to buy all the necessary tools inside. "Fixed" the window right beside the gas pumps as the sun went down. And by fixed I mean gorilla taped to the frame haha. But hey, at least I don't have to worry about things flying in my window while I'm driving. Can't thank you enough for this excellent tutorial. Alrighty, time to get back on the road. Wish me luck!
    PS - I am not handy at all. This tutorial was just THAT good :)

  • @paulwies4442
    @paulwies4442 2 роки тому +1

    I found this video to show clear, step by step instructions on how to replace your front window regulator on a Honda Element. Tools need: 3/8" ratchet and 10mm socket, flat blade screw driver, phillips head screw driver. There is nothing complicated. This video relieved all of my worries of "what am I gonna do because my window fell down inside the door"
    Thank you for taking the time to make this awesome tutorial.

    • @DIYHonda
      @DIYHonda  2 роки тому

      Glad I Could help!

  • @dannydebonis
    @dannydebonis Рік тому

    Removing that connector @5:30 was a real doozie. Thanks for the video.

  • @Golyamkur
    @Golyamkur 2 роки тому

    Good job, finally someone not yapping for ten minutes before starting the actual job and doing a nice job narrating. Comprehensive, precise and detailed! You're hired!

  • @edyoungblood6826
    @edyoungblood6826 Рік тому +1

    Really well done video! Thank you you for putting it together. I ended up getting some double sided trim tape to reseal the vapor barrier - 20 year old car. Used #2 adhesion level.

  • @TommyMondayz
    @TommyMondayz 10 місяців тому +1

    Thanks! Made my life a whole lot easier. Excellent, helpful, nice camera work. Very well produced.

  • @jeffreydebos3788
    @jeffreydebos3788 2 роки тому

    Needed this video the other one I watched was for the passenger. This one is so much more detailed.

  • @feralcatbox
    @feralcatbox 3 роки тому +3

    This should be the gold standard for tutorial repair videos! Thank you so much!
    If you need to pick up this part locally, I used a Dorman Window Regulator #748-132 (for the passengers side, #748-131 for the drivers). Hopefully your window regulator fails on a sunny day. ;)

  • @JasonNewmarch
    @JasonNewmarch 2 роки тому

    Saved me 300! Thank you so much- it really wasn’t that hard at all

  • @jasonsanders8202
    @jasonsanders8202 3 роки тому +3

    Thank you for taking the time to film this.

  • @brotoriousone5735
    @brotoriousone5735 Рік тому

    Nice move taping the window up, wish I would have watched your video first before I got as far as I did

  • @jbuss357
    @jbuss357 3 роки тому

    Saved me $300, probably the best walk through of how to replace a part ive seen

  • @kaylynn143
    @kaylynn143 2 роки тому

    Just used your video to help me through changing out the window regulator. Excellently done! Saved me about $350 and a lot of vivid language.

  • @lydiay5532
    @lydiay5532 2 роки тому +1

    Thanks a million for the walk through! The hardest part about the whole thing was doing it in 100 degree Texas heat. ;-) Honestly, I’d rather sweat than shell out the $300 to have somebody else do it. Cheers!

  • @shawnbrauch2424
    @shawnbrauch2424 3 роки тому +1

    Very impressive directions! Could not have done this without you! Well done! Thanks

  • @ibloodbender
    @ibloodbender Рік тому

    thank you, you’re the only video i found that actually mentioned how to fix it if the window was stuck up and not coming down 💯

  • @williambranham6249
    @williambranham6249 2 роки тому

    I had to replace this regulator about 3 years ago so I needed a refresher course. Yours is excellent. My wife and I did the repair this morning and we're still speaking. We work differently in that she likes to use a ramrod to put things together and I'm more a look at the parts king of guy and carefully then put them together without force. Of course on occasion some force is needed. I'm always amazed how much design and engineering goes into car manufacturing to make things fit together in such a compact package. I assumed the motor in the regulator was bad not the fact the cable had failed. Again thank you.

  • @rossbannister8411
    @rossbannister8411 2 роки тому +1

    Done and done. Great video. Thank you for posting.

  • @yal100
    @yal100 2 роки тому

    Best replacement video for this out there. Thank you
    So annoying that the default fail is down 😢

  • @gugorinousa
    @gugorinousa 3 роки тому

    I just want to say thank you for your videos. It just help me changed the window regulator on my Honda element 2006. I appreciate it. Your videos are the best ..... You saved me 550 dollars.

  • @ChefMatthewWeber
    @ChefMatthewWeber Рік тому

    Great tutorial!! ITS ALIVE!!!!!!

  • @nahmean7036
    @nahmean7036 Рік тому

    Thank you for taking time make this video sir.

  • @jaimesalvat5464
    @jaimesalvat5464 2 роки тому

    excellent description of the procedure

  • @2SixString
    @2SixString 3 роки тому

    Thanks so much for posting! This saved me over $300 in relation to having it done by a pro mechanic.

  • @morgasmic83
    @morgasmic83 2 роки тому

    Thanks for your thorough walkthrough. You saved me a good bit of trouble!

  • @evil_hugh
    @evil_hugh 2 роки тому

    absolute legend. saved me so much $$

  • @tomw5318
    @tomw5318 2 роки тому

    Thank you so much for this video! You saved me time and money, and I want you to know that you’re truly appreciated!

  • @MrRogerCorby
    @MrRogerCorby 3 роки тому +2

    Just complete the repair. thanks

  • @kevindwyer6618
    @kevindwyer6618 2 роки тому

    Just wanted to say thank you saved me a ton..did it myself..great video

  • @MichelePollock
    @MichelePollock Рік тому

    Thank you for posting this video!

  • @prestonphelps8497
    @prestonphelps8497 3 роки тому

    You were very detailed . Thank You very much for this info. May you prosper.

  • @fixcar111
    @fixcar111 2 роки тому

    Excellent tutorial, getting ready to do this. Thank you!

  • @MS-ot2cz
    @MS-ot2cz 3 роки тому

    Great video. I’ll be doing this as soon as I receive the new regulator. Thanks!

    • @MS-ot2cz
      @MS-ot2cz 3 роки тому

      Thanks again! Just finishing up the install. Other than the California heat this wasn’t too bad at all!
      Way less daunting than I assumed it would be.

  • @jacobgeoffroy6914
    @jacobgeoffroy6914 3 роки тому +1

    Hey, I just wanted to tell you your video on how to replace a '17 or '18 honda side mirror saved me $700 so thank you. I was wondering however if you could make a video on how to replace the mirror's cap?

  • @tjliebmann2177
    @tjliebmann2177 3 роки тому

    Absolutely TOP quality work

  • @StarkeBill
    @StarkeBill 3 роки тому +1

    Thank you so much! I’ve never done something like this before. Your clear, easy to follow instructions made it all go most smoothly for me. Again, thank you!!

  • @jacksonhoboken
    @jacksonhoboken 3 роки тому +1

    Good video, thanks for making this

  • @tuckedandtruckin
    @tuckedandtruckin 8 місяців тому

    Awesome Ty Just finished

  • @barbaralallegranzi3791
    @barbaralallegranzi3791 2 роки тому

    Excelenté! Thank you!

  • @vwscottvw
    @vwscottvw 2 роки тому

    Well done!

  • @JUDDLILIHA
    @JUDDLILIHA 2 роки тому

    THANK YOU....

  • @airplanemechanic5561
    @airplanemechanic5561 2 роки тому

    Thanks bro!

  • @TheMike941
    @TheMike941 3 роки тому

    Good job bro!

  • @elizabethgillespie1716
    @elizabethgillespie1716 2 роки тому

    About to attempt this. By far I feel the most confident after watching your video. But am I correct, 10 mm wrench is what I need besides screwdrivers?
    Thanks!

  • @alohabychoicefa9968
    @alohabychoicefa9968 3 роки тому +1

    Would you be able to show how to disinfect the AC system or location of the blower on 16 civic

  • @barbaralallegranzi3791
    @barbaralallegranzi3791 2 роки тому

    Will let you know when complete...