You are so talented, articulate and thorough, especially if you are as young as you look (12-14 years old). Regardless of age, you are an amazing, professional presenter.
This 12 yr old is more detailed, articulate, and smarter then me. I feel defeated... I can't imagine what awesome things she will accomplish in the future.
After one minute, fifty nine seconds you created an important point in this video. You showed us that you are human. It was fun watching you having fun. You and your brother made another great review. From sound to camera, all is fantastic and the content is presented with so much knowledge and care. Your research is very thorough and even I am not after a small laser engraver, I enjoyed this video and learned something new. Thank you for sharing
Very good review, direct well spoken and straight to the point.....I'm very impressed with your presentation. After watching the review of a previous model, this one makes me want to go out and buy one just to play with it and make a few odds and ends.......the price is yet to be revealed.
Ah! This is what I was looking for! A company that actually took some time to design things correctly. Tired of dealing with all the basic issues with my Atomstack X7. It works fine, just has so many basic / easy issues that Ortur seems to have fixed. Thanks for the review
Your videos are very well thought out and perfectly articulated. I commend you for your production values and attention to detail. My only critique is to please use a low pass filter on your voice over. There are many 5-minute videos that teach you how to get rid of low frequency noises and humming. You can also try turning down your microphones gain and speaking a little closer to the mic with an inexpensive pop filter. Headphone users will thank you for saving them the headache.
Subscribed, holy smokes so thorough and great production value videos.. I do recommend adjusting lighting so your glasses don't create shadows on your nose. Move the lighting away from directly overhead or add brighter key and fill lights forward of your face to erase the shadow line.
Did the aluminum plate with the Batman logo flatten out again after it cooled? Also, that particular Batman logo looks like it was from the nineteen-sixties TV show. It was less "Dark Knight" and more "brightly colored and campy".
Don't understand why none of laser engraver/cutter have motorized Z axis. With this, we could cut thicker material in multipass (lower the head at each pass)
Actually, there are at least two I've heard of... just can't remember the models. I believe one is the new Snapmaker Artisan... can't remember another...
@@ArtplusHrApps Thanks for the info. The Snapmaker Artisan in a "All-in-One". I'm very suspicious about those machines, overal about the cnc capabilities (rigidity of the structure, vibrations,...)
The LotMaxx SC-10 Shark is a dual extruder 3D printer combined with laser engraver that you can swap out the hot end for the laser end, but I’ve not tested to see what it can really do for engraving: if I’m not mistaken, it’s nowhere near as powerful as this one, and has a much smaller area as well. I’m nor sure if I’ll ever use the engraver feature, though perhaps once I take delivery of the Bambu Lab XC1 Carbon as well as the AnkerMake M5 with v6 I may convert my Shark to pure engraving usage because I already have another LotMaxx single filament printer that I can also use, and because it’s tuned, it works well, so having 2 slower printers with 2 fast printers that can print more filaments at a time doesn’t do as much more to be worthwhile.
ok so you added some more switches to the arduino based GRBL board , this was done by many of us 10 years ago so you are still behind and the next step is ti rip out the arduino and replace it with ESP32 Wrover which will add wifi and bluetooth but we have done this already too ,I really do not know what to say but KEEP TRYING.
"i needed to raise up the unit"... lol I too use filament boxes for my master 2.... terrible though, should stop being lazy and cnc some proper blocks. BTW etching metal like the drink bottle, first coat in sharpie/marker pen before doing
Great video, but you're going to have to start getting more picky about what free to you machines you review. You look to be running out of space in the studio.
Maybe eating daily a big portion of spinach can help growing, all machines you are testing are double in size of yourself. Apologize my friendly laughing, great job well done by team Aurora/Helios.
This is the best video I have found for this machine. Awesome job!
You are so talented, articulate and thorough, especially if you are as young as you look (12-14 years old). Regardless of age, you are an amazing, professional presenter.
This 12 yr old is more detailed, articulate, and smarter then me. I feel defeated... I can't imagine what awesome things she will accomplish in the future.
After one minute, fifty nine seconds you created an important point in this video. You showed us that you are human. It was fun watching you having fun. You and your brother made another great review. From sound to camera, all is fantastic and the content is presented with so much knowledge and care. Your research is very thorough and even I am not after a small laser engraver, I enjoyed this video and learned something new. Thank you for sharing
Loved @1:59 😂 Glad you're having fun doing these. Great review as always. Thanks! :)
Very good review, direct well spoken and straight to the point.....I'm very impressed with your presentation.
After watching the review of a previous model, this one makes me want to go out and buy one just to play with it and make a few odds and ends.......the price is yet to be revealed.
Ah! This is what I was looking for! A company that actually took some time to design things correctly. Tired of dealing with all the basic issues with my Atomstack X7. It works fine, just has so many basic / easy issues that Ortur seems to have fixed. Thanks for the review
Awesome and clear video about the laser, congratulations!
Your videos are very well thought out and perfectly articulated. I commend you for your production values and attention to detail. My only critique is to please use a low pass filter on your voice over. There are many 5-minute videos that teach you how to get rid of low frequency noises and humming. You can also try turning down your microphones gain and speaking a little closer to the mic with an inexpensive pop filter. Headphone users will thank you for saving them the headache.
You did such a great job
Explaining the Ortur laser.
Do you have a video for the stool laser?
Very informative. One of the best reviews of a diode laser I've seen yet. Keep up the good work.
Great video as always 🙂
Good points, impressive design.
Thanks for sharing your experiences with all of us 🙂
1:58 I wasn't expecting this. Immediately hit subscribe!
So, if you were to choose a desktop laser under $1000, would this be it or is there a better choice? Very good presentation.
Your voice is so great, and your work also. 🙂
Subscribed, holy smokes so thorough and great production value videos.. I do recommend adjusting lighting so your glasses don't create shadows on your nose. Move the lighting away from directly overhead or add brighter key and fill lights forward of your face to erase the shadow line.
Great video, but can it cut acrylic?
And if yes, what thickness?
Very good video. Well presented. Keep up the good work. Thank you
Pro job explaining this. Thank you so much.
You did a great job. I believe you sold me👍
I guess my question is does it matter it’s inly 10W when there are 50W machines for the same price? I need to cut 1/4inch ply
How does it compare to the xtool d1?
Brilliant video - well done
hey my friend keep up the good work
on your channel
Can you hook up a Xtool RA2 Pro 4-in-1 Rotary to the OMP3?
good stuff....can the safety tilt shutoff be bypassed? sometimes i tilt my ortur master to accommodate my 'tilted' guitars....
Will this work for brass materials?
Do you need the air pump?
Did it come with the honeycomb bed ???
Great video! Do you think this machine could cut 1.5 mm aluminum?
Super video - thanks so much❤
Great review. I love mine.
Hola! Y graba acero?
Did the aluminum plate with the Batman logo flatten out again after it cooled?
Also, that particular Batman logo looks like it was from the nineteen-sixties TV show. It was less "Dark Knight" and more "brightly colored and campy".
have a look and review roly lasermaster
Its a blast!
molto ben descritta, mi deve arrivare la stessa macchina e sto cercando qualche file da stampare. spero vada tutto bene
Don't understand why none of laser engraver/cutter have motorized Z axis. With this, we could cut thicker material in multipass (lower the head at each pass)
Actually, there are at least two I've heard of... just can't remember the models. I believe one is the new Snapmaker Artisan... can't remember another...
@@ArtplusHrApps Thanks for the info. The Snapmaker Artisan in a "All-in-One". I'm very suspicious about those machines, overal about the cnc capabilities (rigidity of the structure, vibrations,...)
The LotMaxx SC-10 Shark is a dual extruder 3D printer combined with laser engraver that you can swap out the hot end for the laser end, but I’ve not tested to see what it can really do for engraving: if I’m not mistaken, it’s nowhere near as powerful as this one, and has a much smaller area as well.
I’m nor sure if I’ll ever use the engraver feature, though perhaps once I take delivery of the Bambu Lab XC1 Carbon as well as the AnkerMake M5 with v6 I may convert my Shark to pure engraving usage because I already have another LotMaxx single filament printer that I can also use, and because it’s tuned, it works well, so having 2 slower printers with 2 fast printers that can print more filaments at a time doesn’t do as much more to be worthwhile.
What is the price?
Wow, the cutting capabilities are amazing.. my neje 40w doesn't do this
👍🏻👍🏻
Nicely produced video! TBH, my 17000 gbp Universal Laser is as good as this - and I can't run it on my Mac without emulation software !
ok so you added some more switches to the arduino based GRBL board , this was done by many of us 10 years ago so you are still behind and the next step is ti rip out the arduino and replace it with ESP32 Wrover which will add wifi and bluetooth but we have done this already too ,I really do not know what to say but KEEP TRYING.
You have quite the collection of printers and engravers. Maybe you could find some school or maker space that could make use of them?
"i needed to raise up the unit"... lol I too use filament boxes for my master 2.... terrible though, should stop being lazy and cnc some proper blocks.
BTW etching metal like the drink bottle, first coat in sharpie/marker pen before doing
🎃
Great video, but you're going to have to start getting more picky about what free to you machines you review. You look to be running out of space in the studio.
Maybe eating daily a big portion of spinach can help growing, all machines you are testing are double in size of yourself.
Apologize my friendly laughing, great job well done by team Aurora/Helios.
🖒👍🖒 @Aurora