PIAGGIO VESPA PX How to REPLACE THE REAR BRAKE CABLE
Вставка
- Опубліковано 2 січ 2021
- How To replace the rear brake cable on a Piaggio Vespa PX.
The procedure is all most the same for all brake cable. If your brake wire is broken or You need to replace this is a guide to follow.
Remember: You will need a metric set of wrench to work on the Vespa
__________________________________________________________
DISCLAIMER
This video is for entertainment purposes only! I am not a professional. The methods I use may be completely wrong and/or dangerous.
All DIY repairs, build or modifications You perform are made at your own risk
Working on cars, wood, steel, metal, electricity, using tools or any other contents that I show could be extremely dangerous. I am not responsible for any injury, damage or even worst a loss of life.
I am an Amazon, eBay affiliate. May be also other shop or platform in the future. As such, I earn a percentage of sales made through Affiliate links found in the description of my videos and on my website and other places.
Always refer to a professional person qualified for Your kind of need.
----------------------------------------------------------------------------------------------
🔔 Remember: You will need a metric set of wrench to work on the Vespa i suggest You something below on description.
Vespa PX rear brake cable: ebay.us/ql5eXr
PPE (Personal Protective Equipment)
Nitrile gloves (high quality): amzn.to/3UQMA9L
Eyes protection glasses: amzn.to/3EscPwu
Respirator mask: amzn.to/3ApsCeg
Metric socket kit: amzn.to/3gmKwr5
Metric wrench ( high quality full set): amzn.to/3gpkDH0
Metric hex wrench: amzn.to/3hXamT2
Lubricant: amzn.to/3wXHYFO
Please subscribe to my channel ❤️
Try Amazon Prime 30-day Free Trials: amzn.to/3TU9ETD
Join Amazon Family 30-Day Free Trial: amzn.to/3GrLpJs
This will support the channel ❤️
Follow me on social: / 100047639114414
Instagram: / cantharus.sicily - Авто та транспорт
Thank you for this…I have been putting this off but you have shown how easy it is !
Glad to ear this 😊👌
Great video. Thank you!
❤️ Thank You for watching
Very good video, thanks for your good explanation!
Really glad to ear so ❤️😊
Great video, well done
Thank You very much 😊
Very useful. Thank you
You'r well come Sir
Muchas gracias muy explicativo susesosss
Thank You ❤
Good job brother
Thank You very much, You have a nice channel, I just subscribed 🙂🙃
Thank you
You are Welcome.
Thanks to You to appreciate my work 😊
Thankyou
Thanks for appreciating my works😊❤👍🏻👍🏻👍🏻
Hello mate, my foot brake got too tight do i adjust in the screw at the bottom? Nice video
Thank You Very Much ❤️❤️❤️
hi, i lost my accelerator cable and hose inside the chassis and i can't find the tip of the cable and hose how can i lead it thru inside the chassis to the accelerator handle
Try removing the fuel tank (also oil tank if installed). You should be able to catch it from there ;-)
ua-cam.com/video/6XXMLXKrvcE/v-deo.html
this is Italian but give You an idea how to remove the fuel tank
@@CantharusENG thanks ı dont know ı can remove the tank but ı will try without it first if it possible
How to find where ymthe electric connectors for back brake fuse input new fuse no connecters
If Your Vespa has the battery the fuse should be located above or behind the battery. If You don't have the battery You may not have even a fuse.
Due to different regulation depend of Your country May be some differences. In my Vespa with the key in on position Lights and turn signal doesn't work. It just work only the horn. I have a Vespa with electric start and battery.
The two nuts and bolts were easy enough to undo but on my PX the 3rd bolt is spinning and not undoing. Any ideas please?
Try to spin it by hand while You are pulling it. In case try something stronger with a pliers