How to Replace the Diesel Particulate Filter On A Ford Transit/ THE EASY WAY! 😉
Вставка
- Опубліковано 10 вер 2024
- Watch This Video Before You Decide To Replace The DPF on A FORD TRANSIT. And See How Fast and Easy It Is To Remove and Install a DPF. This Video Will Save You Lots of TIME And MONEY! @dairleautoclassicrestorati6892
#fordtransit #transit#DieselParticulateFilter
You are a life saver, I seen a video that has the guy taking the subframe off
Thank you for a detailed video on this. Super helpful. You’re the man.
Thank you Sir! 😊
I just want to say again, Thank you! I'm subscribing and liking! You are awesome.
Thank you very much!
Great video. Thanks
Btw your video is clear and helpful! I bought the autel 808 straight from autel for only $410. I followed your instructions for a regen and it failed so next steps is this process. I’m all for saving money! Thank you so much.
Normally if one fails. It is due to the Engine Light is still on. If that's the case. That repair needs to be resolved before you regen. Sometimes you can regen with the Engine Light on,but it depends on the cause.
Ford wanted $5,000 to replace my filter at 100,000 miles. $5 saw zall blade was a more economical option
Great video man thanks
What is the name of the sensor at the 1:55 minute mark, one of my lines broke off...do you have a part catalog for the part. Everything has been a hassle for my DPF, stuck sensors, stuck bolts, and its a southern van.
What type of socket did you use on the top side @dairleautoclassicrestorati6892, working on ours now and they were stuck, even after pb blaster. Looks like a small extension and impact socket? What size socket, 1/2 or 3/8 drive?
Hello,
If it is the socket that I think that you are referring too. Here is the information.
Performance Tool W84008.
Very good video tutorial, you make it look easy... but still I'll give it a try given the $takes and use the vid time and again for guidance. Is this the same procedure in a 2.2L and 3.2L? In other words I can't figure out if this is one of the mostly UK vids or not.
I've found a DPF cleaning company close to home and all I need to do is take it from my 350 3.2l to them and back on.
Thank you ! Yes this is the same procedure for the 3.2 350. The vehicle that I use was a 2018 HD350 3.2L. You will be saving more 💰 than I did by you taking it and having it clean. I hope the video help. And thank you again!
@@dairleautoclassicrestorati6892 Thank you for the reply Dairle, that's music to my ears! After yours, I watched another vid that said "IDK how you could do it without a lift" indeed, because his procedure was to remove so many parts (subframe, lower control arm, etc, etc) that it left me gutted. I've got two quotes for DPF delete ($1800 and $2500) and if I can do it for the $ 200 cleaning fee, my wallet won't be shot to pieces! You got another sub.
Great video I have a Ford Transit Diesel and it has been giving me a fit and most of that is because of the lack of skilled technicians at the Ford dealerships. I have one question. Why did you not consider cleaning the existing filter and what is your opinion on that?
That is a good question. It would be ideal to see if you can have it clean.That is a money saver and a 50/50 chance that it can be clean. I felt that it was too far gone.
Do you know what is the flat rate labor time is on this job?
The first hose you removed. Is that where you would pour in the cleaning fluid?
That a good question. I personally have never tried to clean one. I normally been replacing them.
How long did it take you? And how many miles did the transit do ?
Set aside a good six hours to replace the filter. The filter showed signs of being full around 110,000 miles.
0:26 that hose your touching, is that the def port? I’m trying to clean my DPF is that the access before the filter??? My 2015 ford transit 350 hd is stuck in idle mode 😢
If I understand you correctly. That is a inlet. If you are unable to regen. You can try and have it professionally cleaned. Or Replace it like I did in the video. It's sad to say the life for these filters are around 100,000 miles.
@@dairleautoclassicrestorati6892 omg thanks for the reply
Youre awesome ! thanks for the time to make this tutorial. where are you located ? ill take my Transit to you the next time.
Thank you for your comment! Unfortunately I do not have a public shop. I'm just a guy that wants to help others with what I know.
@dairleautoclassicrestorati6892, where did you order your DPF from? I currently have a P0420 code, we've already spent way to much money on emissions stuff, any input.
I must say. What you are doing is normal. I purchased it from my local Ford Dealer.
@@dairleautoclassicrestorati6892 I did find out that my DPF and EGR Cooler are covered under Customer Survey from Ford, and the money I already spent, might be refunded. I intend on selling our wheelchair van and getting a gas 3.7, sad that emissions components have planned obsolesence.
Man, I just pulled the subframe on one
Can you please tell me if I have to replace the catalytic converter along with the DPF? Thanks!
Well, it all depends on the Vehicle. The life of the DPF and Catalytic Converter is about the same.
@@dairleautoclassicrestorati6892 it’s a Ford transit 250 3.2L diesel
@@melissawilliams8210 👍🏽
I can’t do the generation because I have this two code p0072-00 and p246D-00 Can you help me whit that thanks 🙏🏻
Some codes will not stop you from regenerating. A PO O72 code can prevent you to move forward. The ECM wants to make sure you have the proper air temp. There can be many reasons why you have a P0246 code which involves the operation of the Turbo.
How did you know the filter needed to be replaced? Just the regen request on the info screen?
Ford said that these Filter are good for 100,000miles. Most of the time you can get away with just doing a regen. I am over a 100,000 and the vehicle would not take a regen. Also the vehicle dash keeps telling me that the filter is full.
Awaome video, quick question there are 2 filters on the exhaust. The filter at the manifold is the dpf and the other down the line is a cat? Or another filter. Mechanic wanted to charge me 9k to replace the dpf and im like um no thats 2 mortage payments XD ill buy the part and replace it myself haha
Good deal👍
@@dairleautoclassicrestorati6892 thank you for your videos on this type of vehicle, there are little to few people working on the 3.2 deisel engine. Its a blessing to find your content have a wonderful day.
@@SharpTepes Thank you very much Sir!
It is definitely the catalytic converter
whats the name of the sensors you took off
It maybe the Nox.Sensor. I am not sure which one you maybe referring too.
I have a problem to do the regeneration because I have this two code p007-00 and p246D-00 Can you help me whit that thanks 🙏🏻
Well if you can do the whole job one handed.. 😂
How much was this job$ sir???
Don't remember exactly, but just the price for the DPFand the Gaskets.