Alfa Romeo Giulietta How to Remove Headlights and Change the Bulbs
Вставка
- Опубліковано 11 кві 2021
- In this Alfa Romeo Giulietta video we look at how to / how do you / can I remove the headlights without removing the front bumper, for changing / how to change the bulbs and or general maintenance, then put it all back together.
#Alfaromeo
#Giulietta
#Vialettotony
#Driveway
Please like and Subscribe to the Channel to see our other "how to" & "repair" videos and "things you wish you knew earlier", that are uploaded already, and will be getting posted soon with everything from Battery replacement, Trunk / Boot Wiring Looms, Air Filter, Cabin Pollen Filter, MAF Mass Air Flow Sensor Fix Cleaning, PCV valve, Fuel / Gas Filter, Steering Fault Codes Fixed, Passenger Airbag Light, Electric Windows, Anti Rollbar / Sway bar Bushes, Drop Links, Brake Discs, Brake Pads, Brake Fluid Flush, Rear Springs, MOT Preparation, and a whole lot more to come. 2.0 JTDM 170
In questo video dell'Alfa Romeo Giulietta vediamo come / come faccio / posso rimuovere i fari senza rimuovere il paraurti anteriore, per cambiare / come cambiare le lampadine e / o per la manutenzione generale, quindi rimontare il tutto.
#AlfaRomeo
#Giulietta
#Vialettotony
#Driveway
Per favore, iscriviti al canale per vedere i nostri altri video "come" e "riparare" e "cose che vorresti sapere prima", che sono già caricati e verranno pubblicati presto con tutto, dalla sostituzione della batteria, al bagagliaio / avvio Cablaggio, filtro dell'aria, filtro antipolline dell'abitacolo, pulizia fissa del sensore di flusso d'aria di massa MAF, valvola PCV, filtro carburante / gas, codici di errore dello sterzo fissi, luce airbag passeggero, finestrini elettrici, boccole barra antirollio / barra antirollio, tiranti, dischi freno , Pastiglie dei freni, lavaggio del liquido dei freni, molle posteriori, preparazione del MOT e molto altro ancora. 2.0 JTDM 170
En este video de Alfa Romeo Giulietta, vemos cómo / cómo puedo / puedo quitar los faros sin quitar el parachoques delantero, para cambiar / cómo cambiar las bombillas o el mantenimiento general, y luego volver a montarlo todo.
#AlfaRomeo
#Giulietta
#Vialettotony
#Driveway
Dale me gusta y suscríbete al canal para ver nuestros otros videos de "cómo" y "reparar" y "cosas que te gustaría saber antes", que ya están cargados y que pronto se publicarán con todo, desde reemplazo de la batería, maletero / arranque. Telares de cableado, filtro de aire, filtro de polen de cabina, limpieza del sensor de flujo de masa de aire MAF, válvula PCV, filtro de combustible / gas, códigos de fallas de dirección fijos, luz del airbag del pasajero, elevalunas eléctricos, barra estabilizadora / bujes de la barra estabilizadora, eslabones de caída, discos de freno , Pastillas de freno, lavado de líquido de frenos, resortes traseros, preparación MOT y mucho más por venir. 2.0 JTDM 170
W tym filmie Alfa Romeo Giulietta przyglądamy się, jak / jak to zrobić / czy mogę wyjąć reflektory bez zdejmowania przedniego zderzaka, wymienić / jak wymienić żarówki i / lub ogólną konserwację, a następnie złożyć to wszystko z powrotem.
#AlfaRomeo
#Giulietta
#Vialettotony
#Driveway
Polub i zasubskrybuj kanał, aby zobaczyć nasze inne filmy „jak” i „naprawiać” oraz „rzeczy, które chciałbyś wiedzieć wcześniej”, które zostały już przesłane i wkrótce zostaną opublikowane wraz ze wszystkim, od wymiany baterii, bagażnika / rozruchu Wiązki przewodów, filtr powietrza, filtr kabinowy, czujnik masowego przepływu powietrza MAF Czyszczenie naprawcze, zawór PCV, filtr paliwa / gazu, kody usterek układu kierowniczego naprawione, oświetlenie poduszki powietrznej pasażera, szyby elektryczne, stabilizator poprzeczny / drążek wahacza tuleje, drążki obniżające, tarcze hamulcowe , Klocki hamulcowe, płukanie płynu hamulcowego, tylne sprężyny, przegląd techniczny i wiele więcej w przyszłości. 2.0 JTDM 170
Dans cette vidéo Alfa Romeo Giulietta, nous examinons comment / comment pouvez-vous / puis-je retirer les phares sans retirer le pare-chocs avant, pour changer / comment changer les ampoules et / ou l'entretien général, puis remonter le tout.
#AlfaRomeo
#Giulietta
#Vialettotony
#Driveway
Veuillez aimer et vous abonner à la chaîne pour voir nos autres vidéos "comment" et "réparer" et "choses que vous aimeriez savoir plus tôt", qui sont déjà téléchargées et seront bientôt publiées avec tout ce qui concerne le remplacement de la batterie, le coffre / le coffre Faisceaux de câblage, filtre à air, filtre à pollen d'habitacle, nettoyage de correctif de capteur de débit massique d'air MAF, soupape PCV, filtre à carburant / gaz, codes de défaut de direction fixes, éclairage d'airbag passager, vitres électriques, bagues anti-roulis / barre stabilisatrice, biellettes de suspension, disques de frein , Plaquettes de frein, rinçage du liquide de frein, ressorts arrière, préparation MOT, et bien d'autres choses à venir. 2.0 JTDM 170 - Авто та транспорт
About to do this on my sons giulietta… I wish all UA-cam videos were as good as this, showing all the details including how hard you have to pull and fast forwarding the undoing of the bolts etc. Well done Tony this was a really really well put together video.
Hi Andy. Thank you. I really do appreciate the feedback. Glad that the videos do actually help people. Good luck with it. Have a great day. All the best 👍
Thank you Tony...I'm going to try it now. All this just to change a head lamp.. why does Alfa have to make everything so complicated...on most other cars it's so easy. In 5 minutes flat you've changed the headlamp bulb..
Most car brands are doing it already. Car constructions are overcomplicated because they want you to send your car to Authorized Service Station to charge you huge amount of money for something even so pretty as lightbulb replacement.
Thanks again! My xenon bulb died in the weekend and two shops that advertise that they replace bulbs without appointment refused to do it because it is too much work. Did it myself now and it was pretty easy.
Best video on this topic on the Internet. Very transparently described. Thank you very much.
Thank you for the video. Got to change my bulb and this has helped massively
Really helpful vid. Much appreciated.
thanks for the video help's a lot
Great video 🤙🏾👍🏽
Thanks Asher. Really appreciate the feedback. Thanks for watching and subscribing (if you have). Stay healthy, all the best. 👍
Hi thanks for the info I took the headlights out to replace dipped beam with LED. They are working fine. I had to do the LRL trick with the steering wheel and reset the windows after taking the battery off to make room.
Hi Andy… Really glad it helped. Thanks for watching and subscribing if you have. Really appreciate it. 👍
Tony I’m going have to follow this video step by step. I just can’t seem to get that clip back on just to change my lightbulbs it’s so difficult with the light connected
Lovely car Tony I own a mito in very good nick... I do love Alfa’s keep it going very interesting.
Thanks Michael. Appreciate the positive feedback. I like the Mito’s too, lots of synergies with the G, so hopefully there are some helpful tips you can gain. 👍.
not good cars common for head gaskets and worn tyres
Oggi ho potuto fare la stessa cosa grazie a te 👍
fantastico. ti auguro il meglio.👍
hello! thank you very much for your video, it is very informative, in my alfa romeo I have the position leds off in both headlights... all the fuses are good !!! what could i look at
I’d recommend getting the diagnostic codes read. Could be many things I’m afraid. All the best 👍
Hi Tony love your vids thanks..was woundering if you could also do a video on replaicing the day time running lights as I cant find a video on you tube that does
Hi Scott. As far as I know, they’re an integral part of the light unit. Replacing them requires soldering new parts in, or a brand new unit.
At the moment mine are working fine, so will need to wait before I make that video for a while I suspect. Really appreciate your comment though. Thanks for watching. Have a great day. 👍
@@vialettotony HI tony i have an old headlight unit here that one DRL LED failed if that would help towards your future video, is it possible for you to do a boot and bonnet badge replacement video? :) thanks
@@BogeyFinder thankyou but I’ll pass, on your offer for now.
Regarding the badges, I had thought about this before and may still do it in the future but if you’re looking to do yours now, then my advice would be to start removing them from the middle and work outwards. I’m sure I’ll do it one day, but hope that helps for now.
All the best 👍. Have a great Christmas 🎄
Hi Tony, great videos, by the way. I changed my bulbs for Phillips Racing Vison (up to 200% brighter was the claim). I also cleaned off the uv yellowing until the unit looked like new. The result was disappointing to say the least. I don't think I have even a 1% improvement in brightness. What would be your next step? Cheers.
Hi Andy. I read a few forums where people have replaced them for LED bulbs although it’s worth consulting your local MOT provider as some say these are non compliant. Other than that, I’ve never seen a Giulietta with external spot lamps fitted yet🤔
All the best 👍
Hi Tony, another fantastic video !
I have a future project for you. The bag/faux leather behind the steering wheel is attached to the gauges' plastic. One of the two clips has been detached. Any ideas how to put it back ? Tried to this with the steering wheel in place without any luck.
Great thanks for the positive feedback. Sounds like a challenging issue. One I’ll look in to in the future. No ideas right now, but hopefully I’ll find out.
@@vialettotony Thanks Tony ! I'll also have another look when find some spare time in case I can provide you with a useful tip.
Hey C B. Hope you are well. Just wanted to let you know I filmed your video last weekend. I managed to remove the whole thing, clean it and put it back. Hope to get the video out soon.
All the best. 👍
@@vialettotony Fantastic ! Much much appreciated !
Be easier to cut a square hole out of the inner wheel arch liner to access the bulbs and refit the cut out using a couple of bridging clips/screws
But can you replace the bulbs without removing the headlights? The main beam bulbs are really easy to replace but the dipped beam is trickier
Yes absolutely. I mention it in the first clip, although as you say, it is a bit tricky. Thanks for watching. I guess it depends how much patience you have 😁.
yes mate remover number plate and there is a cap you take off to get at the back
Toni any idea what will cause my day time running lights to stop working and how to fix it
Hi. One of them is the master and controls the other, so it could be that one has failed. I presume you’ve been through settings and not turned them off accidentally. It’s possible. All the best 👍.
Hey , nice video but where exactly is the D1S exenon lamp located? I have to change them because they are broken. Thanks!
Hiya. I’m not sure without researching I’m afraid. There should be a diagram on line. All the best 👍
My friend changed my dipped bulbs today without removing anything.He just took a photo with his cellphone to figure out how the clips work
Hi, do you know anything about the boot brake strip lights? Mine went out today but cant find replacement bulbs/strip etc... Cheers
Hi diesel d. Anything light related in the boot lid is potentially related to the infamous wiring loom issue. You could see if you could connect it to 12volts to see if its the strip or the feed to it. I would hazard a guess that the light is okay and its actually the wiring. Have a look on my channel for the "Boot Wiring" video. It shows the right hand loom, but the left hand is very similar.
Let me know how you get on. Thanks for watching and subscribing if you have. Really appreciate it. 👍
@@vialettotony thanks appreciate the reply. I'll deffo check that out. I've used your vids for quite a few jobs on my car now :)
I opened it all up and found 3 snapped wires lol. Spliced them all and lights back working. Cheers for your help mate
@@richardbutler5312 that’s great. I thought it would be. Really glad you fixed it. Pleased to have helped. All the best. 👍
What I keep wondering is why there is no rubber seal or anything on the bumper or bonnet...I noticed that after raining when opening the bonnet thete is water on top of the bumper. In the area where the gap between the bonnet and bumper is. Have u noticed that too? Thx best regards
Hi Stahl. Yes I have exactly the same. It can be annoying after cleaning under there and then it rains and you’re left with watermarks 🙄. Still, it’s a good excuse to look under the bonnet 😉. Have a great day.
Hello
Thanks for your fast reply. I was almost on my way to the dealer complaining 😗. A seal of some kind or a draining hole would have been a good idea ... Italians 😋have a gteat weekend best regards
@@stahlhart8998 haha. No problem. I always try and reply to every comment. It’s always nice to hear when people have resolved something as a result. All the best.
Which engine version you reccomend for typical city driving? I mean short distances. I'm affraid of expensive failure Multiair module in some petrol version (1.4 170CV) and problems with dpf filter in diesel engines. But in my country there is a "way" for fixing dpf filter... ;) So what you think about engine choice while buying used Giulietta?
I run a 2.0 JTDm 170 and use this mainly on local runs including around town. Very easy for low speed control on the clutch because of the strong tick over, and also good for fuel economy still. If you want the fun when you get out of town, this helps with that too. All the normal problems like boot wiring and fuel caps are common across all engines.
@@vialettotony ok, thanks. By the way, what you think about TCT gear box? I ask, because I have the oportunity to buy 2.0 170CV diesel Giulietta with this gear box.
@@Red_Ford I couldn’t honestly say as I’ve never driven one for enough time. Sorry Red Ford. Thanks for the messages though. Hope you’re finding the videos useful 👍
@@vialettotony I think I'll found this channel very usefull. For example - oil and filter changing in Giulietta :)
@@Red_Ford great, I really hope so. Don’t forget to subscribe if you haven’t already 😉. Really appreciate every single subscriber.
Hi, there is a lot of good information here , thank you for sharing .
I m having a problem with my M.O.T keeps failing on the front position lights , they can make them come up my mechanic does not know how to solve the issue because he does not know if there is a housing for them or if this is a function that should be done by the headlights as well ? Do you have any advise or can you tell me where they are meant to be on the car ?
Thank you
regards
Hi Helder. There are adjustment screws on the rear of the headlights that may help you. They change the angle up and down i believe. You can see them at about 13mimutes 30seconds on my headlight removal video. They are silver.
Hope that helps.
All the best. 👍
@@vialettotony Hi thank you i think i will need to replace the entire unit with one where the DRL´s work , my alfa is a 2010 model do you know if the healdlights from a mk2 or mk3 would work on it ? Thank you once again
@@heldergoncalves464 hi. I’m pretty sure they should fit okay, but you will definitely need to perform a Proxi realignment as a mimimum.
I can’t say 100% so don’t take my word for it but your local parts supplier should be able to confirm.
I hope that helps. All the best. 👍
@@vialettotony hi,
Ok thanks again :)
@@vialettotony will i need a proxi realignment when replacing a headlight unit? if so would that be a dealership only thing?
Please can you tell me how many hours did it take to change them?
Less than one. All the best 👍
Love the videos, but, you need a wind muff for your microphone. Either that or post edit in a voice over.
Tell me about it. Dedication to put videos out even in crappy weather.
All the best 👍
Did you have diesel 2.0 170 ps
Hi Insidiafa. Yes that’s right. All the best 👍
Changed both h7 headlight bulbs in less than ten minuets without removing a thing just moved the washer bottle filler to oneside .
Good work Enrico. Yeah, I know it’s possible. 👍. I say about it right at the start of the video. 😀. The video was more about how to take the headlights out. Hope it comes in helpful. Thanks for watching and subscribing if you have. Really appreciate it 👍. Top job. 😎
Hi ! when you say washer bottle filler you mean the one next to the battery or on the other side?
@@geoborgreece hi Geo. I’ll have to watch it again, but the windscreen washer bottle is next to the battery yeah. 👍
@@vialettotony thank you for your answer! And what did you move from the other side in order to put the new bulbs? Seems impossible to do it without removing the right headlight
@@geoborgreece I didn’t actually have to change the bulbs, but I’d agree that it would be very difficult to do without removing the light. As it’s so easy, you may as well remove it anyway. All the best. ✅
Man one LED is not working. Can I please somehow replace the single LED or all the 4? There must be another solution than buying an expensive new headlight???
Hi there. They are a soldered component, so you may be able to unsolder and replace, but I know other people have replaced the unit for a cheaper OEM product and then changed the controller piece over too. Not ideal, but it’s one of those annoying things unfortunately. Sorry I can’t be more help. Thanks for watching. All the best 👍
Recently I've replaced the headlights, by such of the brand Johns. Now it looks like there is a bit too much space between the headlight and the surrounding. Why is it like that? I thought that the headlight is the same as the original, from dimensions.
Without removing any screw of the bumper, can I align the headlight with just the 2 screws on top?