Acid Etching Aluminum for Custom Nameplates
Вставка
- Опубліковано 3 сер 2017
- To make custom nameplates for my work, I use a toner transfer process to etch graphics into aluminum.
The toner is fused onto the aluminum using a laminator. The covered areas are protected from the acid, leaving the exposed areas to become engraved.
Follow me on Instagram: / wesley_treat
TOOLS & MATERIALS FEATURED IN THIS VIDEO
▶ HP Laserjet Pro M252dw: amzn.to/2ur4kvA
▶ Pulsar Toner Transfer Paper: amzn.to/2s0WJpQ
▶ HP Glossy Premium Presentation Paper (CG988A) (A less expensive alternative, but not as easy to use.): amzn.to/2s15yzN
▶ Plaskolite Plastic Cutting Knife: amzn.to/2ikvjTN
▶ Lacquer-Stik Black Fill-In Paint Crayon: amzn.to/2IHjZCn
▶ Pittsburgh 36 Piece 3/8" Stamping Set: amzn.to/2v5ZK7E
For more detailed notes on the process, see the video description for my video on making custom circuit boards: • Making a Circuit Board... .
OTHER NOTES
▶ Why didn't I just etch all the nameplates as one piece, then cut them? Well, I tried that once and discovered that trying to etch too much metal at once causes too strong a reaction. The stronger the reaction, the more heat is produced, which strengthens the reaction even more, and the whole thing bubbles out of control, causing all the toner to slough off.
▶ For this batch of nameplates, I used Pulsar Toner Transfer Paper, especially made for the process, but you can also use the less expensive HP Glossy Premium Presentation Paper, although it doesn't slide off as cleanly. See above for links.
▶ I don't have a good metal shear, so I cut the aluminum blanks by first scoring them with a plastic-cutting knife, then bending them on my brake.
▶ Lightly sanding the aluminum isn't totally necessary, but it gives the metal a little tooth for the toner to stick better.
▶ I usually run the nameplates through the laminator 6-8 times, flipping them over each time.
▶ The ratio for the acid solution is 2 parts hydrogen peroxide (available at any drug store) to 1 part muriatic acid (available at nearly any hardware store).
▶ The packing tape prevents the backs of the metal from the acid, which, as I explained above, would cause a stronger reaction if exposed.
▶ The fan serves two purposes: first, it blows the vapor produced by the acid away from my face, and second, it tends to keep the acid from getting too hot.
▶ The clear coat protects the Lacquer-Stik from wearing off and prevents corrosion of the aluminum. - Навчання та стиль
Thanks for watching, everyone! See the video description for detailed notes.
BTW, I don't know why my closing animation has no audio. It just does that sometimes and I didn't feel like re-rendering the video this time.
How do you dispose of the hazardous chemicals? do you neutralize them or do you take them to a place that accepts hazardous chemicals?Very interesting and informative videoThank you
Can i use Vinyl instead of Toner transfer paper.
Or Can I use regular transfer paper designed for Tshirt printing?
Saludos y bendiciones!! ✌️👍🙏🙏🙏
I really appreciate the style of your videos - they're instructional by being demonstrative, no looping funky music track (SO APPRECIATED!) and voiceover only when necessary. Very enjoyable.
but I still dont know anything.. can anybody finally link me a tutorial or somethign? How does this witchcraft work? How does the etching differenciate between black and white? This is regular printer ink? HOW DOES IT WORK?
These look really good. I love the retro vibe.
Those look super cool. I love the idea of stamping the date/serial number on it. It makes me really want to start doing that for my projects. Can't wait to see how you do it with the CNC! Keep up the good work!
Greetings how do I get in touch with you?
Great video and walk through of the process!
Artwork looks nice! Will try this. Thanks!
This is incredibly informative. Thank you for sharing.
been binge watching these since i found your channel, i really like the look of these..
Great work! Content, editing, everything! Cheers
Beautiful production values!
Wesley, these are wonderful videos.... I was just last week looking for a similar solution
Awesome! I will be binge watching your channel tonight lol
Love all of your videos. You are very talented sir. Keep em coming
Impressive work. BIG thanks for sharing.
Word of the day... "Pharmacological" thanks for the video
In doing circuit boards, I've found glossy magazine paper to work about the best and cheap too. It doesn't slide off, but after soaking, just a rub of the thumb usually leaves just the toner with a thin layer of paper attached to the toner.
Awesome video, thanks for sharing your knowledge
Thanks for sharing Wes!
God bless you Son!
Excellent video format and production !
Faster then CNC ! Bravo....Man
amazing technique
Wow, that really works a treat.
I can't stop watching your video.
Interesting to see the same results being made in a different way. We cut and etch with two different laser machines, then infill with a flatbed uv printer. Keep up the good work.
Like a BOSS. Great work man.
Just a minute, add this to my to do list.......
Hey that was great! Thanks for sharing.
REALLY slick!!!
You used to come into my job all the time! Thia is so crazy that your this successful! I can’t wait to spend all afternoon watching your videos man!!!!
Really? Where did you work?
Wesley Treat Einstein bagle bros!
@@briandimmitt4314 Ah, yes! I started cutting back on eating out. Then, the whole pandemic thing hit. I'll be back someday!
3:00
Perfect, you win, 24 hit super combo finish.
Thank you. Peace and love.
B E A utiful. Thank you for sharing.
looks great!!
Great video - nice work.
Bourbon is definitely medicinal.
That's cool! I never thought to use Muriatic that way. I do something similar but with a laser etcher. The transfer sheets and muriatic is WAY cheaper however.
You are amazing. Thank you!
Wow, that is a labor intensive process.
Nah, not really. I can do a batch of these in about 30-45 minutes. And most of it is sitting down.
Mark Trombley, that was exactly my thought. But there is something super cool knowing it was hand made.
Please do share your new process too if you find the time. It would be nice to compare.
Loved it.
Your channel is really cool.
I love your channel. great tip i think i am going to try to make some of my own. Keep up the great content i know i am hooked. and bourbon doesn't count in my book.
I don't know where ya'll are from but where I'm from Bourbon is considered a medical necessity!
Great video . Thanks subbed
I'm going to totally try this :)
very nice job.
Very cool!
Are you going to show us how you make your new labels on your CNC next?
very nice !
Cool stuff.
You're like the cool dad I never had
Your mom's name isn't Cheryl, is it?
I love this guy
Almost exactly 3 years later -- Aug 3 2020 -- 99.9K subs.... Almost to 100K!!!!!!!! Go go go!!
Wonderful sir
Very informative video
my dear very wonderfull work
I know you mentioned you were going to be using you're CNC for future name plates. But just a tip if you take old vinyl release liner and cut it to size then run regular toner on it. It works better then any other type of papers.
Always wanted to know how to make these. Wow
Cool video
EXCELLENT THEREPY
Looks absolutely amazing. Is this some special kind of toner? sorry in case i missed it, cheers!
Many years ago my father had the opportunity to start what at the time would have been one of only a few printed circuit board companies in the US (He worked for a small newspaper at the time), but he passed citing having a family to support and didn't want to take the risk of failure. The newspaper eventually folded and he went onto other things that technology eventually swallowed up.
For many years he's regretted not doing so. I was at the time still in diapers. Now dad is 90 and I'm in my 60s..
Interesting video
Nice...good a job
great tutorial.
what type of laminating machine do you use ??
Awesome
While I have a laminator, I also have a heat press which provides good heat and pressure. I wonder if that would work as well? You could certainly do a lot of them quickly at one time that way.
Very cool! Can you etch all the way through and still get a nice clean line?
1:03 you need to watch more This Old Tony videos. His stuff cutting technique is superb:D
Thank you so much for this video. It was very clear and helpful. I have a question: If I wanted to etch a whole A4 size sheet of text on a copper plate, how would I do it, and what equipment would I need?
Nice!!!
Great video! Always wondered how to do this. I'm going to use this technique for an Aliens xenomorph defence locker I'm making.
When will you come out with a video on making enclosures for electronic projects from molds ? That should be cool!
Thanks
amizing 👍
Very cool. What software did you use to design the nameplate?
nice video. Quick question. After you apply the lacker with the stick it doesn´t need to be coated with a varnish? or it does dry and you can leave as it is. Thank you
I do the same process with copper, brass and bronze. It's nice to know you can use hydrogen peroxide and muriatic on the aluminum. Ferric Chloride is way too strong on aluminum and usually pulls off the resist. Excellent video - thanks!! (BTW - that lacquer stick is amazing. I've never seen those!!)
For aluminium just muriatic acid is enough actually. The peroxide is only needed for metals the acid isn't strong enough for like copper.
@@rubenproost2552 what about washing soda?
@@rimmersbryggeri No that is too mild. Some use salt water and electricity with the part to be etched on the negative pole. Citric acid, lye or vinegar may also work on aluminium. When in doubt try it out with some aluminium foil.
What about disposal of the chemicals? Is one of them safer than the other to simply dump down the drain (after neutralizing) or do they have to be neutralized as best you can and disposed of at a chemical waste station?
I too am strongly interested in disposal. Basically the only thing holding me back from doing my own etching is "how much of a pain will it be to safely dispose of this?"
Hola como estas excelente video gracias por compartir tus conocimientos,que ácido se usa para este trabajo.Gracias(Leonardo de Argentina 🇦🇷👍
I like that the way you process of aluminum plate let me know others if ever 20x30 inches of plate it could engraving accurate?
Your videos have got to be the sharpest and best lit of any DIY channel on YT. They are crystal clear! Any info on what camera and lighting rig you use?
Thanks! Right now, I use an EOS M3 with a kit lens and these lights: amzn.to/3n8zO6j
Sorry, I just realized the M3 was my older camera. I'm using an M6 now.
❤good wark
really cool thanks. clear instructions
I wish someone on Etsy or something like that did these. I’d probably order a bunch
cool
You take your subscription and get out of here!
Fantastic video!
Have you tried using white vinegar for cleaning 2 part epoxy from your hands. 10% works best, but 5% will work too. Thanks for the videos, Billy in Canada
wow think you so mutch
It's funny, I saw this and thought, this guy looks like me, then hey, I have the same glasses. Wait, I have that exact same shirt, lol.
Excellent!
what was the tool and supplies that you used at the final step to rivet the finished/etched label to the metal box and where can i get it?
You are funny, interesting and keep me from going to bed when I should!! :-)
Is it possible to do the same on brass?
Would you be able to use a 3d print as a resist in order to save material? Or maybe wood. Not sure if it will eat through it. Trying to etch .25 inch stainless steel using the salt water electro etching method. Thanks.
Great tutorial! Thanks. Just btw, the Pulsar transfer paper doesn't work in the amazon brand laminator. The metal plates get pretty hot, but the transfer does not occur at all. So I guess I'll try a different paper.
Okay, I tried a different paper, but everything I try leaves the toner partially stuck to the backing paper. I'm wondering if there a certain type of laser cartridge required. The image only ever partially transfers, even when using a range of heat and time settings with the iron. Disappointing.
HI sir nice thanking
If you don't have a nice press brake like that, a tablesaw with carbide-tipped blade works great.
Is that a printable etch resist you printed out? Or what was it? Used to run an etching company back in the 80s, we made plates in high quantity. Brass, stainless or alum. We had a nice camera to make film with to apply over KPR (Kodak photo resist) for ultimate fine detail. coat the metal with KPR, lay film on top in a vacuum glass holder, expose, develop, then ready to etch. Its a lost art.
Use something to vibrate the tub to agitate the bubbles off the etching (scrap PC fan with 1 blade removed, old phone with a vibrating alarm), comes out spot on for small details as any bubbles that stick is displacing your etching liquid.
Hi Wesley. I'm wanting to etch right through aluminium to create a stencil with which to burn my name/insignia into wood using a gas flame torch. The problem I can foresee is that the middle parts of letters enclosed completely by etching will be lost and it won't look right. Do you know if there's a way around this other than to use a graphics program to join up all the middle parts manually as with traiditional stencils?
if you don't have a laminator, you can use an iron. I don't remember the setting but I think it is "cotton"? but the hotter the better......and I used regular laser paper....
Wesley. Would a vinyl sticker have the same protection effect?
I have a round object so not sure how I would heat transfer to the round object
i like
dope