I'm working on your Halo BR, fitting it for Airsoft after I find a sufficient 3 round burst internal. I'm excited to make a collection of BR's with my favorite skins. Also, thanks for making the scope and lenses separate. I'm going to turn it into a real scope with the BR reticle using one of my old scopes, then slap it on one of my real rifles. Maybe some Nerf versions as well. So much excitement!
Usually whenever I use magnets the hole is tight enough that you don’t need glue one problem with magnets is making sure they are in far enough for everything to sit flush and not put in in to far because then it’s not as strong
Definitely needed this, all the files in your updated Boba Fett armour set were a little overwhelming but this will make it much easier! Would you be painting this before putting all the pieces together or after?
Do you need the metal rods or can you get away with just gluing the parts together as long as your careful with it? just finished printing your model and not sure where to get these specific rods with the right dimensions.
wat if you put de magnet that's on the front of the power cel and the magnet where it connects the same pole when you open the pistol it would jump out right?
Excuse my english, maybe not good enought. Trying to see your patreon, but the link in the description seems not to work. Is your patreon working? Or should I get the stl in your web? Thanks.
Hey I bought this and the armor files to get started on my first suit. I saw your other video recommending 5% infill for armor, I tried that for this blaster and the grip seemed a little soft. Do you have a higher percentage for blasters?
@@heroic3darts449 I just printed these over the weekend, tip for you! When you print the grip and chamber, face the body with the 5 pin holes directly at the bed, no raft and supports only touching build surface. Beautiful prints and they fit together almost seamlessly. Can't wait to get mine finished.
Really do like the utilizing of magnets instead clips or snaps, looks awesome
I would love to see it finished. Any plans on some other models with this level of engineering?
Dude this is the coolest 3D pistol I’ve ever seen
That’s awesome would love to see a video of it finished!
Great Job! I was planning on ordering this for my set so it really helps thanks
Glad to hear it!
Beautiful looking blaster. If you get the time to finish it please make a video of it.
My kit arrived in Taiwan! Thanks Galactic Armory!
Can you please finish this blaster. I want to see how you finish it so I can do the same. Keep up the good work Dude!
I like the new intro
This is freaking awesome! I love it
Let’s see it finished!
Would love to see a how to prep and paint this blaster.
It would be really cool to see it finished.
I'm working on your Halo BR, fitting it for Airsoft after I find a sufficient 3 round burst internal. I'm excited to make a collection of BR's with my favorite skins.
Also, thanks for making the scope and lenses separate. I'm going to turn it into a real scope with the BR reticle using one of my old scopes, then slap it on one of my real rifles. Maybe some Nerf versions as well. So much excitement!
Usually whenever I use magnets the hole is tight enough that you don’t need glue one problem with magnets is making sure they are in far enough for everything to sit flush and not put in in to far because then it’s not as strong
For the magnet at the bottom of the chamber just put the magnet on the power cell and use that to put the magnet in place
Just be careful not to glue the magnets together!
@@GalacticArmory put a thin piece of plastic between them?
please do crosshairs 773-Firepuncher. with his backpack too!
Could you make a tutorial on how to put together mandos pistol
Can you do a tutorial for Hunters Knife from the bad batch? I think that would be so cool!
any possibility of getting a pauldron and other stuff for clones from 327th star corps from bf2
Definitely going to be getting one of these for my next Mando build (still not finished my first yet 😂)
I’ll probably buy that.also looks awesome
Definitely needed this, all the files in your updated Boba Fett armour set were a little overwhelming but this will make it much easier! Would you be painting this before putting all the pieces together or after?
Sanding and smoothing before assembly would definitely be easier haha
You should make your own Mandalorian armor
You should finish it!!
I’d like a finished video
Do you need the metal rods or can you get away with just gluing the parts together as long as your careful with it? just finished printing your model and not sure where to get these specific rods with the right dimensions.
Question about helmets what infill do u use, what type of soupports and also what speed
I have an idea! Make a power armor helmet from Fallout.
Please finish this!
Hey man, do you ever plan on selling a generic mandalorian helmet without Boba's dent?
Yeah I want to!
Do Jango‘s armor. It is the same as Boba‘s but without dent!
Just use bobas and fill the hole with bondo when doing your filling 🤷
I thought there was a "main body no dent" variant in the files?
wat if you put de magnet that's on the front of the power cel and the magnet where it connects the same pole when you open the pistol it would jump out right?
Excuse my english, maybe not good enought. Trying to see your patreon, but the link in the description seems not to work. Is your patreon working? Or should I get the stl in your web? Thanks.
Make old bounty hunter boba westars
How long does it take for your stuff to arrive if you live in Iowa?
Nice
Hey I bought this and the armor files to get started on my first suit. I saw your other video recommending 5% infill for armor, I tried that for this blaster and the grip seemed a little soft. Do you have a higher percentage for blasters?
Can u plz do captain rex
Do you have the files to this blaster for sale or just the raw print?
Yep, got the files as well
@@GalacticArmory awesome thank you for the reply
I’m finally getting around to print bobas armour so this blaster would look epic
@@heroic3darts449 I just printed these over the weekend, tip for you! When you print the grip and chamber, face the body with the 5 pin holes directly at the bed, no raft and supports only touching build surface. Beautiful prints and they fit together almost seamlessly. Can't wait to get mine finished.
@@WusteHase thank you for the tips
a list of parts would be helpful.
there is a list of parts on the website. ignore my first post.
And jango 2 westars and 2 holsters
Please paint the blaster again.
Dew it