The engine is like build to fit your plane. I have bought the same engine, and a Phoenix Stinson Reliant 1:7scale 1720cm wings plane. Looking forward to build it this winter,ready for the spring later. I like how you have placed the Electrics and servos. Nice video.
needle high about 1.6 turns needle low about 1.1 turns However, the position of the needle is different for each engine. Still need to feel the adjustment. Thanks.
How much value you get when you spend it. Of course, the power is not as strong as the OS-30 or Saito-30. There is no problem with NGH-30. The device is just right on this module. Thank you.
Beautiful plane. Looks like a perfect combination for this model. Nice job on the assembly.
Thank you.
Very nice job Alan! Flies as good as it looks 👍👍
The engine is like build to fit your plane. I have bought the same engine, and a Phoenix Stinson Reliant 1:7scale 1720cm wings plane. Looking forward to build it this winter,ready for the spring later. I like how you have placed the Electrics and servos. Nice video.
Thank you for your compliment.
what are the high and low settings of the needle
You are great at making suits and setup.
Tanks
needle high about 1.6 turns
needle low about 1.1 turns
However, the position of the needle is different for each engine.
Still need to feel the adjustment.
Thanks.
@@alanfan9989 yes, that's right, thank you
Good job sounds good thanks
Thanks a lot.
throttle linkage some problem.
It can be released by the vibration of the engine.
Now set up like this. There is no problem. Thank you.
i miss the flying field in hsinchu city
How about the engine ? Is easy to tuning the needle or headache?
Easy to adjust. Stable after adjustment.
Hello Alan
What about the engine
👍🤟🙏
How much did you have to shorten the bulkhead to fit the NGH gf30? Thanks
Shortened by 30mm.
How did the plane balance with this engine? Was any tail weight added?
The weight of this engine is just at the CG position of the airplane, without increasing the weight of the tail.
Hi what size propeller are you using ... thank you
Now using 16*10 (2 blade). About 8300rpm. Thank you.
@@alanfan9989 ok thank you 😎
Can you remember what size the 3 blade was please ...thank you
@@mickwalls1871 16x10 3 blade =7200rpm
Such power is slightly insufficient. thank you.
What brand are the electric retracts ?
taobao search for PZ-15096. (Metal steering seat 21KG. RMB:80)
Do you recommend these engines ?
How much value you get when you spend it.
Of course, the power is not as strong as the OS-30 or Saito-30.
There is no problem with NGH-30.
The device is just right on this module.
Thank you.
@@alanfan9989 Yes i agree ,appreciate your thoughts.