How to setup zkteco mb460 access control system
Вставка
- Опубліковано 5 лют 2025
- How to install an access control system using ZKTeco Time and attendance terminal with access control function. This is a practical acess control system Installation training.
The video shows
1. The various components that make an access control system
2. the video introduces the mb460 time and attendance terminal, the access control power supply unit, the Electromagnetic lock and the exit button
3. the video shows how to interpret the wiring diagram for the ZKTeco access control system wiring.
4. how the MB460 Terminal is wired
5. how the mb460 is connected to the power supply unit
6. how the exit button and the magnetic locks are connected to the mb460 time and attendance terminal.
7. how to verify persons through the mb460 using the finger print.
8. access verification through the RFID Card.
very informative thank you (Sudanese live in saudi arabia)
Hello, nice hearing from you.
Super Video, nun kann ich auch so eine Anlage reparieren. Vielen Dank
Thanks so much for all the compliments
Thank you for your clear explanation and I appreciate your help
Thank you
Best video ever i see
Thanks brother❤
I give God thanks. You are most welcome. You can find more of my videos at www.youtube.com/@tech_inside_out
Very well explained, brother. Thank ( Thailand )
Thank you, Hello to all my friends from Thailand.
Very educative and easy explanation
Thanks for liking
what if the power supply is not labelled ? can you use one power supply unit for access control system and for cctv
Yes, you can
thank you for the step by step explanations
You are welcome, am glad it's helpful
How did you program the fingerprint to the system and the card as well please
When you go into the system, it gives you the chance to place your finger for number of times and then confirm a successful entry after a number of placements. Same does for the card.
Thanx for yo informative lecture. Should we expect for a biometric system setup soon?
Yes, expect more of this and many others including the bio systems
Do you have video for fire alarm system
how can i connect biometric to the power supper only to turn it on? is it 12 v and ground only? please advise. thank you!
There is a provided power supply for that purpose.
How will the connections be if I want two fingerprints, one for entry and one for exit, and a gate in the middle? Is it possible for me to make the gate open if the fingerprint is in one of them, or will a problem occur?
I have not tried that connection. I would have to study the manuals and come out with an answer to this.
I will give you feedback, please remind me.
Hey friend, I am trying to do the same connection, if you have any advance please let me know, best
Yes is Possible! U can buy a separate fingerprint sensor with same model and connect the NC in series with push button and then apply DC power or instead use ethernet cable to connect from MB460 to the new sensor and Thank me later ❤
thank you . its very supportive info.
You are most welcome
Perfect.what if electricity goes off? What becomes of the system
It would go off.
Why was the com port on mb460 goes into GND port of powersupply and not the com port? Any idea.
I may have to do a deeper study of the circuitry on the power supply to be able to tell you why, but I must say that the circuit has been added to the product by the manufacturer of which I followed the manufacturer's wiring instructions as shown on the circuit diagram.
very educative video
Thank you
How to identify which green port is top and bottom
Please explain further, i dont understand the question
Great thanks❤❤❤
You are welcome
Thank you God bless you
Amen, God bless you too
can you share the power supply you used?
It is a specific power supply for the MB460
@@Tech_Inside_Out I saw that there's a connection on the battery terminals, may I know what is it?
what about the face recognition
Once you input the face by showing your fave to the camera, it would be able to verify you by your face.
Please how i can integrates with My own system and how?
Please which system would you want to integrate it into?
Possible to reset without master key?
Please what would you want to reset?
@@Tech_Inside_Outhow can one wipe off existing data on the device without any software. Can it be achieved by hitting the reset button on the back? Thanks
Thanks ❤ bro
You are most welcome
How to check megnet power
My door is not working magnite how to repaire
It might be the connection
@@Tech_Inside_Out suddenly is not working puss bottom is working what to do sir
Sir only not work magnet door look another puss bottom and acces passport all is working hoto solve this problem
BONSOIR VOUS AVEZ UNE VIDEO POUR CONNECTER MB460 AVEC LE PC , JE VIENS DE L"ACHETER ET J'ARRIVE PAS A LE CONNECTER AVEC MON PC PORTABLE ??
Je n'ai pas encore fait de vidéo à ce sujet.
Thank you Sir
Most welcome
my power supply no have COM so what I put where?
1. What brand of Access control are you using?
2. Which power supply are you using on it?
3. There should be a wiring diagram attached to the power supply, what does it suggest of where to connect the COM terminals.
It is not the manufacturer recommended power supply
What is the name of power supply unit
It is a power supply Unit for Access Control systems
you didn't show us how u set up the card and ur fingerprint through the computer...
Well noted, i will do that in a later video
Thnk you
Most welcome
Wah ooooo
🙏
Lewis Frank Allen Sandra Williams Amy
Translate to English
Jackson Deborah Moore Patricia Thompson Karen
Please translate to English
5923 Lebsack Union
.