You guys continue to impress with your skills and the work you are able to accomplish. One thing that does concern me is your lack of eye protection, especially with the wire brush wheel when removing the seam sealer. Please protect your eyes, you only have two.
I thought the same thing, it was cool until he hooked the frame machine to it and tried pulling the whole structure over instead of just straightening. I wouldn't want to get hit on that corner (or any other really) in this car.
I know panel worker do like Ivan do with in panel . You have not look there when you pickup your car after some acident You just look out side and see of paint its okey with ather parts ha ha Good work 👍 From Sweden
If you like the 'reddish ' colors...research the Color 'Bordeaux' it was a color from Ford..its such a nice rich burgundy brown,just beautiful I think you might like it...
So here in the UK red cars don't end well due to faded paint and bad laquar peel and we don't even had hot weather really so just wandering how red cars fair in the us with your hot weather etc🙂👍
The Tesla's have very specific jacking points in which you need to use a puck so the jack head (or piece of wood) doesn't damage the battery compartment. I hope you haven't damaged it.
Can you do a smoked gloss lacquer or deep opal over the red ....would be very different...especially the smoked pearl....seen a few UK cars with...and it's kind mad....looks great
Guys I have always like your work. But I'm not a fan of the beat out the dents in the wheel well method.. I think it should have been replaced.. But in the end it's your project.
Same as they did on their f250. Sad to see such cars get half ass repairs. And that’s how salvage cars het their bad reputation cuz of folks like this.
Working on Tesla for body parts is hard because parts have to be outsource from basically people that part them out . Hopefully Elon Musk fixes that problem,but great work didn't think you were going to fix that inner structure.
Where the f*ck did you get that idea? You can buy brand new panels from the Tesla parts department. These guys are too cheap to even order a used inner wheel tub, let alone use new stampings. With all that hammering and pulling, the car is likely to crack and get written off again someday. The cosmetic fix is deceptive.
Ivan one thing I noticed between you and 23rd garage or even V-Tune when they remove a quarter panel they use a gusset at the bottom where the new quarter meets the old for strength before welding. Is there a reason for that or just reinforcement purposes. Or you feel with your professional opinion that its not needed. Just curious.
You guys Rock!!!! Love the channel guys, keep it up!!! Body KIT all the way and keep the same color, Ivan I voted for all the other cars to be yellow, but this one would look great, keep the red.
Great job as always. The tire tub came out nice I actually thought it should have been replaced but Ivan you hit it out of the park. Actually this time I do disagree about your color I think yellow might be nice. But it's your car and your money.
That's it, my Tesla's going to your shop, bro! I'm gonna be like that guy from the other day trying to convince you to take on his completely totaled car.
Here we are again, literally to the 1% who's reading this, God bless you, and may your dreams come true, stay safe and have a wonderful and blessed day.😇
If all else fails good ol' big hammer works everytime 🤣🤣That new quarter hides a multitude of sins 😁😁Never mind Tesla buyers are not too bright they just look at the pretty outside😏😏
Do a candy apple red Ivan gold base? Silver would be a brighter candy apple how many actual candy apple red Tesla's you know of or seen? I know it's a lot of work but it would definitely be different....(still wouldn't get me to buy one) but would be pretty cool...old school paint on new tech car...... don't get me wrong electric has come along way but not in my wheel house..... and I like the fact you use salvage parts more than dealership parts.. sometimes you have to go dealer on something's...but salvage keeps America going...... the other channels go dealership parts constantly and claim to recycle.....love you guys down to earth hard working and men of faith👍👌✌️🇺🇸🇺🇲
Hello Guys I like how you pick cars and fix …recently my car broke down BMW328i I’m looking car but not expensive I’m thinking buying this time car from you guys how I need to contact you guys..thank you
Ivan: I'm going to be doing all the work while Mike hangs out. Mike: Somebody's got to hang out! Quit teasing us and give us the color swap LOL Thanks Guys! Eddie
Not sure if Arthur Tussik would approve....but great content.
wow what a great job so far. That inner wheel well still needs some love.
53 Chevy cherry red please
master of the frame pulling. looks new.
Greetings from Colombia yes body kitt
I think a nice yellow for the new paint..like the golf cart!!
I think this time yellow would be appropriate. But it's there car there money but I agree yellow 🟡.
The wheel looks better without the hubcap.
Inner panel wouldhave made the job nicer but some had ratherplay with their hammer. Lines are looking good so far. Keep it up.
Rear quarter panel looks amazing 💯👀👍
You make it Look Easy !
Wow! You guys are really good! We enjoy watching you brothers working together!
What an awesome job you guys!! A black cherry red color would look awesome on this vehicle and something different too.
I gotta hand it to the both of you. You guys are amazing. You never disappoint. 😮
what do you disconnect power wise to safely weld and work on the car about to do the same job but on the other side
Way to go Ivan. You have many talents. 👍
You guys continue to impress with your skills and the work you are able to accomplish. One thing that does concern me is your lack of eye protection, especially with the wire brush wheel when removing the seam sealer. Please protect your eyes, you only have two.
Great job ivan,you're not afraid that inner structure will be weak after straightening? Can't wait to see the next episode. Thanks john from arizona
I thought the same thing, it was cool until he hooked the frame machine to it and tried pulling the whole structure over instead of just straightening. I wouldn't want to get hit on that corner (or any other really) in this car.
That is turning out really nice, great job!
I know panel worker do like Ivan do with in panel . You have not look there when you pickup your car after some acident
You just look out side and see of paint its okey with ather parts ha ha
Good work 👍
From Sweden
You need to put 2 big exhaust tips out the back just to confuse people 😂
Flame Throwers!
It looks good so far.
If you like the 'reddish ' colors...research the Color 'Bordeaux' it was a color from Ford..its such a nice rich burgundy brown,just beautiful
I think you might like it...
Awesome job, nothing seems to phase you guys well done..
Very nice. Black Cherry red
These jobs are great
So here in the UK red cars don't end well due to faded paint and bad laquar peel and we don't even had hot weather really so just wandering how red cars fair in the us with your hot weather etc🙂👍
You guys are great certified Niko brothers!
Great Job
Great job so far.
Looks great!
So aluminum is not a metal, you made my day. :D Great video though, thanks for sharing.
what rivet machine did you use for the dowel
You are doing a great job Mike and that repair job is looking well .Greetings from Ireland 🇮🇪
That is Ivan, Mike is the other guy.
@Firerain Firerain maybe he meant the camera work🤷♂️🤣🤣
Paint it vantablack. Would be unique and look awesome
Damn dude nice work!!!!!
Nice job Ivan 👏 👍 👌 on the quarter panel.
But not on the inner panel
The Tesla's have very specific jacking points in which you need to use a puck so the jack head (or piece of wood) doesn't damage the battery compartment. I hope you haven't damaged it.
Really a great job boy’s. Cheers Steve 🍺🍺🍺
The right rear wheel/suspension appeared bent, how would that get resolved?
Brilliantly done!
you are still working on the ford can't wait to see when it is done. keep up the great work .
Love the Tesla build
Great progress. The cars have such a limited range of colors - I would change.
Can you do a smoked gloss lacquer or deep opal over the red ....would be very different...especially the smoked pearl....seen a few UK cars with...and it's kind mad....looks great
OEM, coming out great.
Hello I have to solder on a tesla Y can you tell me if I have to disable the battery obtaining thank you
Very very nice
Guys I have always like your work. But I'm not a fan of the beat out the dents in the wheel well method.. I think it should have been replaced.. But in the end it's your project.
Yes i agree always a half ass cover up.fix it right
Definitely NOT THE CORRECT WAY
Yes. Kinda janky
Same as they did on their f250. Sad to see such cars get half ass repairs. And that’s how salvage cars het their bad reputation cuz of folks like this.
Does salvaged model 3 allowed to supercharge?
Working on Tesla for body parts is hard because parts have to be outsource from basically people that part them out . Hopefully Elon Musk fixes that problem,but great work didn't think you were going to fix that inner structure.
Where the f*ck did you get that idea? You can buy brand new panels from the Tesla parts department.
These guys are too cheap to even order a used inner wheel tub, let alone use new stampings.
With all that hammering and pulling, the car is likely to crack and get written off again someday. The cosmetic fix is deceptive.
Love when you guys use a framing hammer to work on cars. Come on man !!!!
does 2018 vs 2021 have the same quarter panel ?
Being waiting for this build!!!!!!🍬🍬🍬🍭🍭
Looking good...
Can't go wrong with a facelift 👏
“Tooken”. Not a word
Quiero trabajar con ustedes soy de Maracaibo Venezuela
here they do real work, not some third world country work that you know. Come here legally to work as well, pay taxes just like everybody else.
Nice!! Is it a clean title?
Can't believe that inner isn't being replaced. What a mess, more signs of a half job.
My brother has one n it's flat black you should do a flat red
The amazing Ivan.....!
metallic blue...?
Great work as always guys..
Looks fine to me, dont mind the mess behind the panel haha it works. Actually the back panel looks pretty good have to say
Ivan one thing I noticed between you and 23rd garage or even V-Tune when they remove a quarter panel they use a gusset at the bottom where the new quarter meets the old for strength before welding. Is there a reason for that or just reinforcement purposes. Or you feel with your professional opinion that its not needed. Just curious.
You guys Rock!!!! Love the channel guys, keep it up!!! Body KIT all the way and keep the same color, Ivan I voted for all the other cars to be yellow, but this one would look great, keep the red.
That’s good work.
Great job as always. The tire tub came out nice I actually thought it should have been replaced but Ivan you hit it out of the park.
Actually this time I do disagree about your color I think yellow might be nice. But it's your car and your money.
🟡 yellow this time Ivan.
nice content
Love the new music…😊
Cherry red.
Magenta!! someday you will...
That's it, my Tesla's going to your shop, bro! I'm gonna be like that guy from the other day trying to convince you to take on his completely totaled car.
how much cost to fix it ?
Love your Videos…..
Should have replaced the inner fender for a complete job.
Here we are again, literally to the 1% who's reading this, God bless you, and may your dreams come true, stay safe and have a wonderful and blessed day.😇
If all else fails good ol' big hammer works everytime 🤣🤣That new quarter hides a multitude of sins 😁😁Never mind Tesla buyers are not too bright they just look at the pretty outside😏😏
Great! Looks good ❤
Looking pretty good for who? Change the inner panel, the strength as compromise
The inner High strength steel is also hit and will also needs to be changed, poor repair job and compromising the car safety for the next owner
If you add a body kit, it won't be "just another Tesla", so no need for a color change :>)
There everywhere.
I thought Tesla did not allow pulls to vehicles or are there exceptions?
Guys your not scared of work deep quarter would made that job nice
Looking good keep up the fine vlogs thanks
Do a candy apple red Ivan gold base? Silver would be a brighter candy apple how many actual candy apple red Tesla's you know of or seen? I know it's a lot of work but it would definitely be different....(still wouldn't get me to buy one) but would be pretty cool...old school paint on new tech car...... don't get me wrong electric has come along way but not in my wheel house..... and I like the fact you use salvage parts more than dealership parts.. sometimes you have to go dealer on something's...but salvage keeps America going...... the other channels go dealership parts constantly and claim to recycle.....love you guys down to earth hard working and men of faith👍👌✌️🇺🇸🇺🇲
candy apple red
Maybe lower it with the body kit. And a hood scoop for a laugh?
Better than New !!! Can’t wait to see the body kit - it would be great to see it not look so much like a jellybean!!
Better than new? After all that messing around with the aluminum structural panel? 🤦♂️
Pearl Red?
Hello Guys I like how you pick cars and fix …recently my car broke down BMW328i I’m looking car but not expensive I’m thinking buying this time car from you guys how I need to contact you guys..thank you
I thought Tesla states no structural pulling per their repair guidelines?
You finally changed your music now I can actually watch your show
good job, you guys actually had better panel gaps then what comes out of the factory
Wassup I just got my merch and it looks like quality stuff
Ivan: I'm going to be doing all the work while Mike hangs out.
Mike: Somebody's got to hang out!
Quit teasing us and give us the color swap LOL
Thanks Guys! Eddie
Tessie is begging for a glamor body mod 😍
👍 Nice
How about some eye protection brother!
Hi i would like to change the rear quarter panel for tesla model 3 , can you replace it for me? How do i contact you?
A color change is a lot of work, but since Michael needs more experience sanding, it would be advantageous. 😂