I am a wannabe machinist at 73, just hobby work, and I have learned so much from your videos. Thank you so much for sharing your experience and education.
Another fine video. I remember back to the mid 60's when I was in metal shop in high school. My teacher was the only teacher that didn't hate me. I wish you were there. I also wish you could make it to the summer bash. I would like to meet you. Bill from Seattle
Love your old school videos I took my apprenticeships from a 45 year tool and die machinist . Your videos remind me of him. Thank you for teaching the newer generation something that is not taught anymore.
It has crossed my mind a few times, that you could make a digital height gauge, using a $10 digital caliper. You would start by milling off the fixed jaws, parallel to the shaft of the caliper. Next, you would mill the back of the moving jaw, to leave the jaw parallel. You would then mount the modified caliper, onto either a shop bought, or home made, height gauge base, and attach the scriber bit to the modified moving jaw of the digital caliper. Hey presto, you have a digital height gauge, for a fraction of the price of a proprietary one.
Certainly far more accurate than using a scale/rule. I've got one from Aldi, which cost me about £8 a few years ago, and it's accurate to within about a thou.
these latest projects are amazing. fantastic techniques, and building and understanding the workings of tools/devices that improve one's shop! thank you!!!
hi Mr pete , i am a microbiologist (soft hands lol) , never been in a machine shop, and i realy enjoy watching your videos, machining looks fun good luck
Hi tubalcain, great video again👍would you consider doing a video about cutting oil and coolant on mill and lathe work? I.e when to use it when not to, what types for different materials etc. when I was learning we used a soluble oil feed on the Colchester for most ops as it was said to have better cooling property, but I don't see that out there anymore. Hope you don't mind me using this to place a request.. Manny Thanks
Interesting project. Could you make one suitable for mounting a cheap digital scale to? You could then have a 'Poor mans' precision height gauge. Cheers Crispin
I'm glad to see you're using that nice German rotary table you took so much time to recondition. And here you thought it was likely too big to be of any use to you.
Just watching the milling operation and I thought I would point out to anyone building this that depending on how you hold the bar and machine the slot for the rule relative to the other flat will hand the height gauge either left or right.
Mrpete when someone wants to make something very precise no tool it's enough for that. Let say, i need to make something with two surfaces at 9° 10' 27". How many people has in his homeshop that kind of tool to set that freaky angle?
Search is your friend: www.ebay.com/itm/General-Tools-301-1-6-inch-x-1-4-inch-Flex-Stainless-Steel-Graduated-32-64-/272393753728?hash=item3f6beed480:g:I34AAOSwOyJX6~NE www.amazon.com/General-Tools-301-Precision-Stainless/dp/B00004T7SZ/ref=sr_1_1?ie=UTF8&qid=1490539146&sr=8-1&keywords=General+301%2F1
Thanks. I did search, but those results don't come up on U.K. versions of the websites. Shipping from the U.S. has become crippling recently, so I'll have to look for Chinese alternatives. Perhaps your new president will do something useful and help your export economy to beat the Far Eastern competition.
I did look for a Chinese version, but with no luck. Might not be much call for a narrow scale. Our new president has already been far more useful than our last one. We had nowhere to go but up.
The guys with CNC would have (a) failed to produce a drawing because their cad software would not update properly, so they work on that for a couple of hours then (b) produced a corrupt g-code file, so they work on that for a couple of hours, then (c) break their last remaining end mill because they forgot to change a feed rate, so they wait a couple of days for one of those. By which time you have produced the height gauge, twice, and all the videos.
Hi mrpete, Let me know where and when you get his scrap aluminum at 20 cents a pound, I'll be there soon... ;) I've got my DeLorean powered up and ready to go after I set the date... lol Cheers, Pierre
I've got a height gauge I picked up at an auction for 10 euros. I looked it up on the internet and it was made in the early 50's and would have cost you roughly the same as a good secondhand car at the time.....
Why don't you just use a remanufactured digital caliper as the donor part, all it takes is a flat polished base to mount it in and a bit of surgery to the caliper..........I made one and a friend borrowed it and I never got it back.
Why not use a digital caliper to measure the height. Set scribe on surface plate and clamp head. Measure from bottom of base to top of slider and zero caliper now you can measure height accurately. I made a depth Gage for my Starter Master vernier caliper similar to this. Make a head with 1/8 hole and set screw use a 1/8" diameter piece of drill rod 8" long for measuring rod and make a 1/2" button with set screw hole to lock button on 1/8" drill rod. Set rod through hole to surface plate and clamp with set screw set caliper to 6" and use as Gage to set button and clamp. Then all you have to do to measure a depth is measure head to button and subtract from 6". I have been wanting to make one of these with a 1/16" rod for smaller holes and slots.
Can someone help me please? I've got an atlas craftsman 10 inch lathe and the hole that goes through the headstock has some kind of factory hardened bushing in it. It's bigger than the #2 morse taper tailstock so I always thought it was a #3 morse taper but I ordered a #3 and it's too big to fit. What kind of taper is it? Can I get the bushing out and then is the spindle hole a #3 morse? I tried to lightly tap it out but it didn't budge, it's not threaded is it? Sorry for the long post but I know there's a bunch of knowledgable folks here and don't personally know anyone to ask.
Provided you have a dial test indicator and the compound on the lathe, feed the compound in and out indicating against the taper until you read zero. Once your indicator reads zero, feed all the way in, chuck up any round stock(that has been faced), get a sharp tool and center it. Feed the compound all the way out, advance the carriage forward, and check how far off center you are. The distance you moved forward with the carriage and the distance from center are the two sides of the triangle that make up your taper.
You like the dial type because you have skills and can use them. Individuals who can do actual machine work are becoming fewer and farther between. CNC machinist are just setup men.
Thank you for sharing your knowledge! Always a pleasure to be in your "classroom".
Thanks
John Baugh a
John Baugh this really knows his stuff
This is a wonderful project. A height gauge such as this one would be perfect for my knifemaking. Thanks, Mr. Pete!
Thanks for watching.
I am a wannabe machinist at 73, just hobby work, and I have learned so much from your videos. Thank you so much for sharing your experience and education.
Thanks for watching
Great timing on this series. Yesterday I started searching the net for ideas on building my own gauge so was excited to see this series start today.
Thanks
Another fine video. I remember back to the mid 60's when I was in metal shop in high school. My teacher was the only teacher that didn't hate me. I wish you were there. I also wish you could make it to the summer bash. I would like to meet you.
Bill from Seattle
Sure wish you were my shop teacher when I was in school.
Thanks Mr. Pete.
Thanks for watching.
It was great to see you in person with Adam Booth, and onwards into the breach delivering more fantastic content, thank you Mr Pete!
Thanks for watching.
Love your old school videos I took my apprenticeships from a 45 year tool and die machinist . Your videos remind me of him. Thank you for teaching the newer generation something that is not taught anymore.
Thank you for watching, and that die maker must've been a great guy
no!! i was like. wait! video ended!! im melting...... 😃😃😃 cant wait for the follow-up..... great job teach!!!
Thanks
It has crossed my mind a few times, that you could make a digital height gauge, using a $10 digital caliper.
You would start by milling off the fixed jaws, parallel to the shaft of the caliper.
Next, you would mill the back of the moving jaw, to leave the jaw parallel.
You would then mount the modified caliper, onto either a shop bought, or home made, height gauge base, and attach the scriber bit to the modified moving jaw of the digital caliper.
Hey presto, you have a digital height gauge, for a fraction of the price of a proprietary one.
afaict the cheap ones are good enough, they just eat batteries
Certainly far more accurate than using a scale/rule.
I've got one from Aldi, which cost me about £8 a few years ago, and it's accurate to within about a thou.
They only eat batteries, if they're left switched on.
The one I have, switches itself off after a couple of minutes of non-use.
the ones I've seen people measure the current consumption on there was basically no difference between on and off
My batteries last for months.
these latest projects are amazing. fantastic techniques, and building and understanding the workings of tools/devices that improve one's shop!
thank you!!!
Look forward for the next part. Another great video Thank You for the knowledge you part to us! Thank You Mr Pete.
Thanks for watching.
Looking forward to watching this series Mr. Pete!
Thanks for watching.
Another fascinating project. A height gauge is indeed a super useful tool.
Thanks for watching.
hi Mr pete , i am a microbiologist (soft hands lol) , never been in a machine shop, and i realy enjoy watching your videos, machining looks fun good luck
Thanks for watching
just found your videos, you put a lot information in the videos. easy to watch and learn from. thank you sir.
Thanks for watching.
Hi tubalcain, great video again👍would you consider doing a video about cutting oil and coolant on mill and lathe work? I.e when to use it when not to, what types for different materials etc. when I was learning we used a soluble oil feed on the Colchester for most ops as it was said to have better cooling property, but I don't see that out there anymore. Hope you don't mind me using this to place a request.. Manny Thanks
Thanks for watching.
Tubalcain thank you, you are such a useful teacher and excellent.
Thanks
Interesting project. Could you make one suitable for mounting a cheap digital scale to? You could then have a 'Poor mans' precision height gauge.
Cheers
Crispin
I like the scale insert method. Great idea.
Thanks
Really enjoying this, look forward to more.
Thanks
CNC guys would still be working out gcode by the time you're done with the part :)
Thanks
David Berndt hmm yea and purchase 500 $ in tool holders to make it
@@miguelcastaneda7236 B/S....
I'm glad to see you're using that nice German rotary table you took so much time to recondition. And here you thought it was likely too big to be of any use to you.
Thanks
Another interesting project. Looking forward to seeing the rest. Regards.
Thanks
Just watching the milling operation and I thought I would point out to anyone building this that depending on how you hold the bar and machine the slot for the rule relative to the other flat will hand the height gauge either left or right.
True-Thanks for watching.
4:15 Hey, look! It's the Matthias Wandel version height gauge!
Noooo.... If Mathias did it, it would made from three different types of scrap wood and accurate to a tenth
Hello Lyle, I saw one of these on EBay for about $35.00. But then you would not have the joy of making one. All the best, Edgar
another great video mr. Pete
Thanks
Where can you find a thin rule like that?
For a stable combination square (a bit pricey) check out the LaSquare LAS-12S
The head is aluminum, not cast iron
Mrpete when someone wants to make something very precise no tool it's enough for that. Let say, i need to make something with two surfaces at 9° 10' 27". How many people has in his homeshop that kind of tool to set that freaky angle?
Pretty cool stuff Mr. Pete.
Thanks for watching.
I can never find part 2 of the videos. They aren't lined up. I'm guessing this project turned out ok as well as the making of the compound slide. ?
Do a search or go into the play list
The play list isn't arranged by video numbers. I searched for a long time and gave up- You have a LOT of videos. LOL. I'll keep looking- Thanks.
Thanks once again for the inspiration. One question - where did you get that narrow scale?
@tubalcain I would like to know that too
Search is your friend:
www.ebay.com/itm/General-Tools-301-1-6-inch-x-1-4-inch-Flex-Stainless-Steel-Graduated-32-64-/272393753728?hash=item3f6beed480:g:I34AAOSwOyJX6~NE
www.amazon.com/General-Tools-301-Precision-Stainless/dp/B00004T7SZ/ref=sr_1_1?ie=UTF8&qid=1490539146&sr=8-1&keywords=General+301%2F1
Thanks. I did search, but those results don't come up on U.K. versions of the websites. Shipping from the U.S. has become crippling recently, so I'll have to look for Chinese alternatives. Perhaps your new president will do something useful and help your export economy to beat the Far Eastern competition.
I did look for a Chinese version, but with no luck. Might not be much call for a narrow scale.
Our new president has already been far more useful than our last one. We had nowhere to go but up.
Or perhaps, not. He's mostly plays golf and tweets.
I really love to watch your video.
Thanks for watching.
The guys with CNC would have (a) failed to produce a drawing because their cad software would not update properly, so they work on that for a couple of hours then (b) produced a corrupt g-code file, so they work on that for a couple of hours, then (c) break their last remaining end mill because they forgot to change a feed rate, so they wait a couple of days for one of those. By which time you have produced the height gauge, twice, and all the videos.
lol
Hi mr pete would you make video for optical flat or optical parallel
How to use and get accurate reading
I do not own an optical flat
Thanks mr pete whenever you have make one in furure please i like watching your videos there are in very details thanks for replaying
Hi mrpete,
Let me know where and when you get his scrap aluminum at 20 cents a pound, I'll be there soon... ;)
I've got my DeLorean powered up and ready to go after I set the date... lol
Cheers, Pierre
Thanks
It's not always about the destination but the JOURNEY 😎👍👍
Yes
Lyle ; I would love to have some of your toys, in my shed., Regards Frank
It's true, I have a lot of toys
My search for something exactly like this for knife making has led me to your video. Are you interested in selling one of these? Amazing craftsmanship
Sorry
I've got a height gauge I picked up at an auction for 10 euros. I looked it up on the internet and it was made in the early 50's and would have cost you roughly the same as a good secondhand car at the time.....
Good buy
Good buy
Why don't you just use a remanufactured digital caliper as the donor part, all it takes is a flat polished base to mount it in and a bit of surgery to the caliper..........I made one and a friend borrowed it and I never got it back.
I remember you from some of my old Yahoo groups. I use to go by Latheturners9c on the groups.
Oμορφο βίντεο πολύ ωραία δουλειά Καλημέρα
THANK YOU...for sharing.
Thanks
Thanks for the video!
Thanks for watching
Why not use a digital caliper to measure the height. Set scribe on surface plate and clamp head. Measure from bottom of base to top of slider and zero caliper now you can measure height accurately. I made a depth Gage for my Starter Master vernier caliper similar to this. Make a head with 1/8 hole and set screw use a 1/8" diameter piece of drill rod 8" long for measuring rod and make a 1/2" button with set screw hole to lock button on 1/8" drill rod.
Set rod through hole to surface plate and clamp with set screw set caliper to 6" and use as Gage to set button and clamp. Then all you have to do to measure a depth is measure head to button and subtract from 6".
I have been wanting to make one of these with a 1/16" rod for smaller holes and slots.
That is a good idea, I never thought of it
HECK YES! Thanks Tubalcain!!!
Thanks
Can someone help me please? I've got an atlas craftsman 10 inch lathe and the hole that goes through the headstock has some kind of factory hardened bushing in it. It's bigger than the #2 morse taper tailstock so I always thought it was a #3 morse taper but I ordered a #3 and it's too big to fit. What kind of taper is it? Can I get the bushing out and then is the spindle hole a #3 morse? I tried to lightly tap it out but it didn't budge, it's not threaded is it? Sorry for the long post but I know there's a bunch of knowledgable folks here and don't personally know anyone to ask.
Provided you have a dial test indicator and the compound on the lathe, feed the compound in and out indicating against the taper until you read zero. Once your indicator reads zero, feed all the way in, chuck up any round stock(that has been faced), get a sharp tool and center it. Feed the compound all the way out, advance the carriage forward, and check how far off center you are. The distance you moved forward with the carriage and the distance from center are the two sides of the triangle that make up your taper.
Great video, thanks.
Thanks
I prefer manual machines over CNC, for one I know nothing about CNC.
Superb!
Very useful project with lots of new operations! Second but FIRST with a useful comment! LOL
lol
Thanks for sharing sir...
Thanks
Lyle,
The advantage of a dial height gage is it doesn't have a battery that will go dead. :-)
Thanks
Dude I thought the thumbnail was a Minecraft Steve looking at the camera while wall sitting against the height gauge.
Thsnks
Excellent project, a height gauge is handy for any shop.
C&C is boring, it's like hiring someone to chew your food.
Thanks
Digital Apple to the Teacher!
Thanks
that is a healthy drill bit you got there, seeing it producing such nice chips.. man.. sigh
Thanks
Dang, sometimes I really wish I were you!!
Thanks
Has anyone got so stuff forsale I’m a poor man myself need some stuff for my lathe tooling etc don’t have a mill to make parts yet lol
eric oneil With a some bar and blocks it is doable
Just bought one the other day.... Bummer!!!
Ace hardware or ebay
I'd rather be laughed at as a machinist than be laughing as a button pusher. :)
That's a good one
nice
You like the dial type because you have skills and can use them. Individuals who can do actual machine work are becoming fewer and farther between. CNC machinist are just setup men.
Your having to much fun
lol
First👍🏽
And that gets you what?