How to Blow up a YZ125 in 38 seconds
Вставка
- Опубліковано 5 лют 2025
- Make sure to give the video a thumbs up and subscribe!
Don't forget to leave a comment and follow my instagram @kyle.corbett
FOLLOW ME!
Instagram: kyle.corbett
Tik Tok @kylecorbett.official
that is some pure dedication sacrificing his bike just for his fans!
Ya with only 7k subs probably won’t make any money 2:55
😊oh I watched more and you are rebuilding it so then it kinda makes sense anyway great video so far
@@Sportshighlights169-m9j this video has the potential to blow up & help his channel big time . Risky but I see it paying off here soon!!
it's for science
@@theoldhusky5089 😂😂😂
Would be nice if you could also show us the damages when you're finished , was hoping u do one for when u killed it with the diesel
Don’t worry I filmed an engine tear down after the diesel just haven’t posted it yet.
@@kylecorbett can you post it its been 3 weeks
@@kylecorbettI'd like to see you rebuild it...probably only needs a top end kit...check your crankshaft seals...if they leak it will never run correctly...take it and ride it as hard as you can no mercy to see how much it will take riding ...
@@bentboybbzneeds more then just a top end guaranteed that crank over heated aswell I bet the big end bearing siezed plus piston siezed to cylinder wall
Bro said he’s gonna send it in a pond for 24 hours 😂 is this the new whistling diesel?😂
Screeming gasoline is hes name
I love whistlindiesel
Oh fuck ya
Hahaa, riding my crf110 full throttle till i crash
Fr lol 😂
Jesus. That’s was hard to watch. I always hate to see a bike die like that. Breaks my heart
I know your going to rebuild the yz, but dude that hurts my soul watching it die,
And yes I would like to see the autopsy results and the rebuild
Would love to see a wide open highway ride until it blows. I remember when I had a big bore tuned 50cc, I ran almost always at top speed to keep up with traffic. It would drive at top speed for 2 hours with almost no breaks, and cylinder and piston was still decent. had a little worn line between the exhaust ports.
I would love to do that just to see how long it would take. Only problem is it’s not street legal. Maybe if I find a runway long enough I can try!
When you run whit the bike on the street it use lower rpm, when it is in neutrale it goes at higher rpm becouse doesnt have to push the weight of the bike
@@kylecorbettsend it
@@Lele-vi3ruNo. Just no. The rev limiter is where the rev limiter is. Bikes last on the street bc they have air flowing through the radiators.
@@dinglesdingler1211Fyi: A carbureted 2-stroke like this one has no rev limiter. Therefore it would rev higher without load than it would with. The reason it stops revving is not a limiter, but simply it using up all the air and fuel it can get
This video can only be described in one word: PAIN
Next day on face book market place “lightly used,never abused,runs perfectly fine.”
Today’s episode of “wtf am I gonna do with all this money” 😂😂
don’t matter man he worked for it and he’s gonna rebuild it
Good job Boss Man. The bike would never be ran like that. It should have a load. What is the point? Yes they rev so high and last a very long time. I drive a 380 KTM wide open all the time for short periods. It is on its std. bore. I am sure it might last less than a minute full throttle without a load.
How about getting 4 sticks of dynamite and blowing it up in 1.5 million pieces. Then rebuild it for us.
Or how about draining the engine oil from your car run it wide open so we can see it seize and lock up. Done so many times before. Sort of predictable
I call all what you do a waste.
And as I reported before...I peed in the Bultaco 250 and it would not start.
That was a scientific experiment ..eh?
What did I learn? Urine is not a hydro carbon
@@fredmitchel1236something ain't right if your bike has an std or gave you one 👀
Love the way you added that comment about certain beer brands 😂
Plot twist, it doesn't actually blow up and you have a perfectly good yz125 by the end
Everclear pre-mixed sounds like an amazing idea after it's got some heat cycles on it after being rebuilt
Not the video my wife wanted to hear before bedtime.
😂😂
Looks like the engine only seized so shouldnt be too big of an issue right there. Did seem to leak water from the pump casing probably due to so much sudden pressure so that might need some attention aswell. Otherwise that engine did surprisingly well considering what its gone thru lol!
If he can rebuild it it's not expensive at all. Lol labor is the most expensive thing. He basically is trading his time for content. Seems cool where are u located kyle
@@collind9753it doesent take long at all to rebuild it
@@collind9753"it not expensive at all" yeah if it just needs a piston lol let's see if he needs a new cylinder then it will get a little costly
@@bobthenob9017 I'm just saying if u go to a shop the labor is usually the most expensive part. Since he is doing it himself it saved alot
Rebuild it or not... what a waste😢
To be honest the voice is way better than the girls screaming on my bed
You should blow up a 4 stroke of similar CCs and see how it compares.
My cousin has a Yamaha ttr125, he rev that thing so much it’s awesome, I bet it’ll go for at least five minutes
@@Mikehoncho191 That sounds sick im riding a 2014 crf250 but smaller displacement bikes have a special place in my heart
@@hyjnx oh man I love pit bikes and smaller cc big frames, I love my 450 and being able to wheelie over little holes even in fifth gear but riding the klx110 is fun no amount of hp can replace
@@Mikehoncho191 My 1991 DT125R took 5minutes like a champ and I rode 5000km with the piston afterwards. I was angry at it for the spark jumping over the sparkplug boot when it got wet so I figured I'll dry it up with force 😂 That means 5 minutes full throttle 10 000-11 000rpm sitting still.
I have a 125 4 strokes that the whole family used crashed with, and revved to the limitor everyday, 260 hours pistons sweating for his life
Lasted less than a minute..... "Thats what she said" :D
POV 50 dads at the track warming up their kids bike
This was so painful to watch and hear it blow
You should have heard it in person it was 10x worse
Id have cried for sure
u just blew up my dream bike
nooo such a nice bike and here i am struggling to find a bike with the money i have
Sounded like it already needed a rebuild at the start
😂😂😂😂😂
Honestly suprisingly. My 125 Chinese 4 stroke would last 10+min rev limiter and still started 1st kick everytime. Ended up selling it snd i belive still runs
Chinese bikes are ether lasting 6 months or they never stop. i have a lawn mower that is a chinese brand and its 40 years old and starts first pull
Glad to hear that you swapped tape soda brands 😂
Great video btw!
😅“If you dont already know, my names Kyle…” welp no i didnt, but i coulda guessed. 😮😂
Great Videos! I bet you will become a big youtuber in some time... All the best! :)
This hurt my soul watching my dream bike go to waste😢
Same,poor bike😢
social media really will turn humans into morons for views to say the least
How many of y’all are sitting here knowing what’s going on and what’s gonna happen and still shaking your head as you watch it🤦🏼♂️😂cause that’s me shaking mine…poor bike
Two minutes and five seconds, I think that’s when it’s gonna blow up, but I won’t find out until I watch the video
If this video gets 10k likes lets convince him too blow up the ford in the beginning of the video 😂😂😂😂😂😂
Gonna need a lot more than 10k haha
You should do this on a four stroke😂👍
this guy was hammered during this and regretted it right after HAHA, there aint no way
No he wasn’t
thank you to sacrifice the bike to entertain us , def got a sub from me , keep going mate
He earned a sub for the sacrifice of his bike
Yeah but how long would it take to blow a brand new one?
Thought you’d have millions of subs yet you have 9k… you deserve lots more!
Subbed now 😊
This some whistling diesel shit right here 👍🏻
Would love to see how you rebuild the bike. That's something I've always wanted to learn how to do.
Them tape soda companies 😂 I would love to see the damage and the rebuild and the everclear
this was so hard to watch! but it’s for science!!
One of the best vids I’ve ever seen! Loved it
I’m glad you enjoyed it, thanks for watching!
This dude is the wistlindesiel of the bike community lol i love it tho
Haha thanks just trying to make fun vids for people to watch!
i like a yt video like 1 time every 2 years or something and i left u a like and subscribed i’ve recently decided i wanted to get into dirt bikes trying to learn as much as i can i just turned 18 i’m gonna save for 1, your gonna grow on youtube fast i can tell u that and in the future when u have a bigger fan base you should do a meet up go on a ride or something but keep up the good work man🤝
Awesome man thank you. Save up and get yourself a bike. I promise it’s worth it. I plan on doing bike meet ups once I get a little bigger. I plan on doing both dirt and street meet ups!
My boy has an 05 yz125 that he desert races. That bike is lean, you can tell by the surging. He and I ran toe to toe at a NHHA race out here in Utah. There was 20 miles of deep steep dunes he held that think wide open through. Bike was steaming like crazy but he made it with a 3rd place finish. He put another 25hrs on that bike before we put a fresh piston in.
Of course we want to see the rebuild/damage. Looking forward to see what failed
It hurts to watch such a beautiful bike get destroyed
Every 150 rider be like
Also, the engine failing sounds and looks a lot like an angle grinder finally cutting through a piece of aluminium
I remember the factory manual for the 2004 rm85 r, if used for racing replace rings every 20 hours,,,, regular maintaince every 60 hours,, 2strokes are awsome,,, but built to blow up,,, and be glad it seized ,, if seen many expantion Chambers, filled will piston nuggets,,,😵😵🤣🤣👍
To be fair in comparing brands, you would want to have the same hours on the bike and either the same oil mix ratio or factory recommend ratio
it blows up because it gets to hot, u should put a fan in front of it to so it doesnt overheat and u can see how much it last like that
Holy fuck this was hard to watch lol, She put up damn good fight before she gave out though that's for sure!
Bro is Whistllin Diesel but just for dirtbikes 😂
Damn that would be my dream bike really could have put that bike to good use
You'll get one mate they're out there for cheap sometimes
It would never be worth it but a real test would be on one fresh off the show room floor 😦😂
Good luck getting a new barrel for that bike 😂😂
I appericiate this because i didint know what would happen when you blow up a engine so thanks
😂 great content brother subbed!
Should've put a fan in front of the radiators
I watched the Honda run on diesel last night then this one popped up today. I’m subscribed now.
Love it!
I’ve just watched my dream bike blow up
He's sick after he blows it up
in veneto we say “bravo mona”
Rm125 still be going till this day , try all the main brands then a china brand
Do this again but put the bike in gear and slowly shift to 6th. And let it run😂
lets see that 150 rev until that blows up
Haha not sure about that one. I’m already busy rebuilding the 125 lol
Was the engine fully warmed up because in theory it shouldnt seize until the coolant overheats and that should be atleast 5 minutes. You should be able to bounce it off the limiter for hours if cooled well enough. I believe this would be due to uneven expansion
I would love to see a video on the rebuild!
Can’t wait to watch the rebuild video
This is cool! New ideas are rare these days. Let's see a bunch of blow up testing! Let's see the Carnage inside!
Did that to my 450r ... It put the valves back into spec no need for tightning or further adjustment.
New subscriber from Vancouver, Canada 🇨🇦 great channel 👍
Thank you 😎
@@kylecorbett no problem
Great vid. You deserve more views for your sacrifice for knowledge!
Thank you 🫡
@@kylecorbett yup
Put a fan on the radiator next time. I bet they would last much longer.
I'd like to see if u put some powerful fans on the radiators etc if it would have been able to cool itself an stay pinned alot long. Seems like it basically just overheated an siezed up..
It would have lasted a lot longer but the end result would have been the same, bottom line is the motor is not designed for that kind of strain
@@kylecorbett maybe but feel like people run these bike wot all the time but with lots of air moving through the radiators, who knows tho 🤙
I definitely would love to see the difference between brands and how long they last at full throttle
I agree
Unless you’re doing 2024 bikes there’s no point. The way the bikes been ran in the past will always be the deciding factor there
@@ellisberry8747my point exactly, doing it on other bikes would prove nothing unless on every bike he does he rebuilds it first with oem parts (not after market e.g hotrods) then we could get a ok comparison
@@bobthenob9017 and even then,one small air leak on one of the bikes makes the whole entire thing a waste of time
@@ellisberry8747 couldn't agree more with you man, here's a even crazier thought and this is how deep the rabbit hole goes, each bike could have a brand new piston however if the gap on the rings if bigger on different bikes even that could make a difference due to when the bike heats up one could be allowed to expand more then the other allowing it to run longer, so many things could mess this up probs why we haven't already seen it on youtube ay
I had a Kawasaki kh100 when I was a kid. once i was riding it it did the same thing and i just put it in 1st gear and pushed it backwards. it got unstuck and got me back home. I think there was a problem with its crankshaft.
I’m surprised it locked up so quick. Those bikes get held wide open for like half an hour during a race lol.
i mean there is no cooling the bike has access too like the wind
Bro this dude is so underrated he has the best vids ever
Bro instead of sacrificing a bike like that donated to someone that will want it because I used to me a trail rider since someone decide to stole my trailer with my bikes I haven’t being available to ride since them so there’s people out there that really will appreciate you giving it out to them
Meanwhile me over here working overtime with minimum wage trying to get a YZ125 😭
Waste of money save it for something else
This is a really cool video and I enjoyed it very much but it also hurts pretty bad knowing people are doing this to bikes when I've wanted one for so dang long.
Without any cooling it never stood a chance, if it had a radiator fan it would probably have lasted a bit longer. Lol.
I agree I think if it had some cooling it wouldve went way longer
I thought it was going to last 3 minutes 😂kinda disappointed but it’s true 2 strokes rev high but Honda definitely passing that 3 minute mark
Dont mind me just commenting to boost the performance of this video.
Much appreciated 💯
Couple of observations: This had to be a pre2004 bike due to the steel frame. Can you confirm? I am a Life long 2 stroke 144 yz for life guy and would love to know if this is the 02 or earlier engine. I run an Athena 144 for hill climbing and change out the top end every 20 hours. Nice video.
I had a 2000 YZ125 with the RPM Motorsports 139cc kit. It was awesome in the woods. And messing with stock 250s😂
It looks like a 2000
At least you plan on rebiuld on it! Always kind of sad to see one get run till it blows like that
You ever seen one blown like that before?
@@kylecorbett yeah, usually they just seize real quick.
Love these videos!
I LOVE WHAT YOU SAID ABT THE TAPS SODAS
ngl i thought it would last like 20 sec thats pretty good ngl
It was broke anyways mate was miss fairings leaking and ready to brake on you that’s why you done it son looked like the head gasket was cracked the mount it was leaking 😂😂😂😂
Hey Kyle, great vid, and don’t worry about hammering home that it works good or like in the diesel videos that it’s actually diesel, anyone who’s watching knows your are telling the truth and people who don’t believe you can think what they want
Thanks man!
yep i agree. the haters will hate and not much you can do about it
those 2007+ or whatever YZs are as reliable 2 stroke as anything honda has made. the issue was it has a lean condition wide open not because of overrev
The neighbors are probably happy
Can you please do this with a 4-stroke next
I know someone that did that years ago because his dad said he would buy him a new bike when it brakes so he did that but just put it on full revs at side of a fence
Awesome channel ...its difficult to find good content on UA-cam as I have very curious mind....just a thought ..try running it on vodka?....I saw a guy putting it in a gasoline pickup months ago...with a roll of the dice I'll own a bike again soon....
The tripod must’ve been a Honda.
how the hell did it only last 38 seconds when people rev them like this constantly in a race