I would prefer if you post everything. I am interested in interior exterior and engine performance. so the more you post I can get educated on capabilities that I might be able to do to my own vehicles. So please include any content you can concerning the vehicles. Love your channel and thank you for your content
Great Video, Very Informative!! I have a first Gen with buckets and after two hip operations they are Very Uncomfortable, to say the least. I like how you had a picture of your wife where you can see her, take it from a Senior that person is priceless!!
Thank you so much for this video. Had no idea the wiring still existed for the heated seats in a non Laramie truck. I just got 4th gen seats and now I’m gonna try to tap that same wire and connect it up to the heater wire on the 4th gen seat and see what happens.
I have a 2005 that has no power or no heated seats. I like the 2006 dashboard and seats. How much would you charge if I bought the stuff to convert d inside? From an O5tp a 06.
Dodge did a great job with wiring haha you can't even take features from the same years and connect them half the time because some trucks were wired completely different. I put an overhead console in my 04 from an 04 and the wiring connectors worked great but they were pinned completely different from each other and the only difference was that the truck I got the stuff from like power windows and seats and overhead console was an slt and the truck I put that stuff in was an st.. but I had to completely re-pin the connectors and run some wires as well and my temp sensor still doesn't work but everything else does.. the truck even has the harness for the temp sensor and I put a new sensor in and it doesn't work I tried the sensor from my 03 that I know works and it still doesn't work so idk but atleast my headliner is now nice and clean
Living in Florida I'm looking at the ability to put some cooled seats in mine. My 08 Laramie has these same seats. Time to look at why some of the movement doesn't work on them and why the heaters flash for those 2 cold days a year here. Great video. Just to see how to pull that panel apart so I can replace some bulbs that don't light up.
I need to figure out a 4th gen steering wheel in my 08 and make the heat work for it! I like how you make your videos as informative as possible, keep up the good work!
@horsetorquesdiesel where did you get the switch panel with both seat heater buttons the exhaust brake button and the power window? I can’t find one and I need it
Hey bud, I went through similar thing this past summer, some of the seat functions didn't work, I thought it was the motors. It wasn't it was the switch panel on the seats, so double check that before you buy new motors. I didn't.
I want to get the heated and cooled seats for my 2007 3500 mega cab i wonder if they have wiring for the cooling as well or just the heating part of it, don't suppose anyone knows?
I like the mod! I want to do something similar to a 2nd gen. I have a 4th gen limited as well and want to put 4th gen limited or longhorn seats in my 2nd gen!
I would prefer if you post everything. I am interested in interior exterior and engine performance. so the more you post I can get educated on capabilities that I might be able to do to my own vehicles. So please include any content you can concerning the vehicles. Love your channel and thank you for your content
I will do so as much as I can!
Great Video, Very Informative!! I have a first Gen with buckets and after two hip operations they are Very Uncomfortable, to say the least. I like how you had a picture of your wife where you can see her, take it from a Senior that person is priceless!!
She definitely keeps our family together
I live in South Dakota so it's nice to have, great video..!!
Thank you!
Next upgrade, heated and cooled seats. 😎
If you take all the floor mounting bolts out you can tip the whole assembly back and get at the center seat bolts without removing the seat top.
Thank you so much for this video. Had no idea the wiring still existed for the heated seats in a non Laramie truck. I just got 4th gen seats and now I’m gonna try to tap that same wire and connect it up to the heater wire on the 4th gen seat and see what happens.
You're welcome! Hope it goes smooth!!!
did it work?!
Can you do a video on your shifter set up? Nice looking up grade.
Yes sir doing a whole video on it
Nice work much better than those cloth ones
I agree. Just took a road trip and it was a lot nicer
I have a 2005 that has no power or no heated seats. I like the 2006 dashboard and seats. How much would you charge if I bought the stuff to convert d inside? From an O5tp a 06.
Dodge did a great job with wiring haha you can't even take features from the same years and connect them half the time because some trucks were wired completely different. I put an overhead console in my 04 from an 04 and the wiring connectors worked great but they were pinned completely different from each other and the only difference was that the truck I got the stuff from like power windows and seats and overhead console was an slt and the truck I put that stuff in was an st.. but I had to completely re-pin the connectors and run some wires as well and my temp sensor still doesn't work but everything else does.. the truck even has the harness for the temp sensor and I put a new sensor in and it doesn't work I tried the sensor from my 03 that I know works and it still doesn't work so idk but atleast my headliner is now nice and clean
Living in Florida I'm looking at the ability to put some cooled seats in mine. My 08 Laramie has these same seats. Time to look at why some of the movement doesn't work on them and why the heaters flash for those 2 cold days a year here. Great video. Just to see how to pull that panel apart so I can replace some bulbs that don't light up.
Im jealous but yall can keep that humidity!
@@horsetorquesdiesel the humidity is no joke for sure. Thanks again for sharing the knowledge.
I need to figure out a 4th gen steering wheel in my 08 and make the heat work for it! I like how you make your videos as informative as possible, keep up the good work!
Let me know if you get that figured out I miss my heated wheel! Thank you!
I will if I ever do lol
Nice one ! Those seats are so much better 👍🏻
10000% better!
Very cool...
Thank you.
@horsetorquesdiesel where did you get the switch panel with both seat heater buttons the exhaust brake button and the power window?
I can’t find one and I need it
3rd gen 6.7 button off rock auto
Great video, bring more content like this 👍🏽
Thanks! Will do!
I wish there was a way to fix the buttons mine look horrible like those
I believe they sell stickers to make them Look factory
Gonna look into a few options
Hey bud, I went through similar thing this past summer, some of the seat functions didn't work, I thought it was the motors. It wasn't it was the switch panel on the seats, so double check that before you buy new motors. I didn't.
I will check the old ones but I just want to sell them now that I have the leather!
4th gen seats next!
For the tow rig yes sir
I want to get the heated and cooled seats for my 2007 3500 mega cab i wonder if they have wiring for the cooling as well or just the heating part of it, don't suppose anyone knows?
I like the mod! I want to do something similar to a 2nd gen. I have a 4th gen limited as well and want to put 4th gen limited or longhorn seats in my 2nd gen!
I would have done some 4th gen stuff but saving that for the tow rig build!
well I can say once you use heated seats yea there pretty nice lol thanks
Next upgrade, nv5600 :)
he's gotta built manual valve body, that would just slow him down
If I wasn’t chasing big power sure but like the previous person said I already built the automatic
@@horsetorquesdiesel I know. Lol. #manualswaptheworld