How To Replace A Dishwasher Drain Pump
Вставка
- Опубліковано 2 жов 2024
- #DishwasherDrainPump #Dishwashernotdraining #Dishwasher
Grinding noise coming from dishwasher. How to replace a dishwasher drain pump. What to do if my dishwasher wont drain and there is a grinding noise.
buy dishwasher drain pumps here: amzn.to/2UbScyM
Get Plugged into The Handyman Journey Courses here: handymanjourne...
Get your free Handyman Success E-book here: www.handymanjo...
Watch all the handyman WLOG's here: • The First WLOG Ever! |...
Join The Handyman Journey Facebook group here: / 95509. .
Get your Professional Handyman website here: www.handymanwe...
My Mentor: www.DaniJohnson.com
Follow us on Instagram and facebook @ HandymanJourney
Send me a letter : 7405 Greenback Lane #172 Citrus Heights, CA 95610
Buy Gear here:
The tripod I use: amzn.to/2JNsc5g
The Laser distance Measure I use: amzn.to/2MZ4ODo
Electrical Digital Multi Meter: amzn.to/2KETEFB
Non-Contact Voltage Tester: amzn.to/2Np5LW3
The Electrical Outlet tester I use: amzn.to/2tSRB7t
The Electrical Wire Strippers I use: amzn.to/2KvaPKA
The Best Headlamp ever: amzn.to/2u2FMe0
10 in 1 multi scrw driver: amzn.to/2KzBbva
Use discount code: LEEHANDY and buy Professional Hearing Protection here: amzn.to/2unOwvp
Milwaukee Sawzall: amzn.to/2LvpnGk
The Multi-Tool I use: amzn.to/2uNTZwK
Get your very own RotoZip: amzn.to/2AiqxEj
Buy the M18 Rover spot light: amzn.to/2AJPVmm
From experience I found it best to place hose clamp back to original position. Guided by indentations from previous use.
Works similar for a Neff too, thanks
This helped me a ton!!! I can’t believe I did it! Thanks!!!
💪💪 I am so glad this was helpful!
Thanks
dose the pump have to have water pressure to work or work with its own flow
What did you charge for this?
No clue, it's been so long but probably charged 2 hours
I was looking for a video to show home how to check the sump pump and I ran across you video. I was looking at the guy speaking and remembered we sat next to each other on a plane ride a few years ago! I invited you and your family out to church. Thank you for the helpful video :)
Hey so awesome! I remember our conversation! Thanks for reaching out! 😃
You mentioned the possibility of cross threading. I have found that holding the fitting/line in proper position and turning the fitting backwards while applying moderate pressure, you can feel the threads "drop" whenever you are in the correct starting point to begin tighting. Best way to prevent cross threading for myself
Maybe you should get your own channel, chief
Please read. My experience. Water not drained. I checked hoses. They looked clean and clear. So I wasn’t worry about it. Following the video I decided to buy a multimeter. Checked the water pump for continuity and “Everything ok” like 26 ohms. I still decided to order a new pump from Amazon for $29. Installed it and it works flawlessly. My dishwasher was pretty noisy when new because it has a new and strong draining pump. Last days it was doing very quiet cycles due to, what techs call it, a “tired pump”. Now. At least in my Whirlpool model, I didn’t have to disconnect or remove it from its place and put it upside down. I only remove a plastic cover from the bottom front and squeezed my hands through it. Very ease. First. Disconnect the power. Vacuum all the water. Using pliers, Disconnect the plastic drain hose that goes to the pump. And then. With a mirror. Locate the clip that goes on the other side of the pump. Press it and rotate the pump and voila. Clean and make sure there’s nothing obstructed. Disconnect the electrical plug and connect the new one. Easy peasy. I hope this helps. Salud 🍻🍻🍻
Awesome! Thanks for the comment!
Thanks for the video 🙏
I'd rather pay someone to do what I just had to go through... This process of repairing I went through sucked too much. Well at least I didn't have to pay anyone that's a win
Why disconnect water inlet line?
If you can do it without then go for it!
Hi Alan what type of dust mask you use?
Hi! Is
The drain pump universal? I don’t see the link for it in the comments. I have a whirlpool and I’ve found some
On Amazon, but I’m just curious of the variance if any. Thank you!!
Which pump did you use exactly. I’m working on the same model.
I always tell them that it's time to replace the dishwasher. Remember the best handyman advice you will ever get... *REPLACE, DON'T REPAIR* whenever you can. I get $129 labor to replace a dishwasher, plus optional $20 to haul off the old dishwasher. I can change a dishwasher out in about 20 minutes. Old appliance repairs invite "be-backs," warranty calls, and take a lot of valuable time chasing parts.
It's better to sell them a new appliance. Take the old appliance to your shop, repair/refurb it, at your leisure, and then sell it on Craigslist with a 30 day warranty to a stranger, not a client. Make money the easy way. Right now, I have 2 Ranges, 6 Dryers, 3 washers, and 1 refrigerator stacked up in my sideline appliance department.
-
That's awesome Tom! This is a rental and I did tell the client we should replace the dishwasher and he said he wanted to try to replace the pump instead so that's what I did. Worked out good!
@@handymanjourney Where did you order the Pump/ Motor from ?
In NY thats about $350 part and labor to replace a pump.
Same in AZ
I'll rather buy a new dishwasher
You can definitely do that, thanks for tuning in!
The propeller blades on the pump may have been broken.
Ya something went wrong in that pump for sure! Thanks for your comment!
This is a good one for the fb group.
Yes definitely!